Signed-off-by: Chao Xie <chao.xie@xxxxxxxxxxx>
---
.../devicetree/bindings/input/pxa27x-keypad.txt | 60 +++++
drivers/input/keyboard/pxa27x_keypad.c | 232 +++++++++++++++++++-
2 files changed, 288 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/pxa27x-keypad.txt
diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
new file mode 100644
index 0000000..f8674f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
@@ -0,0 +1,60 @@
+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+ recognized when it is pressed. It is a u32 value, and bit[31:16]
+ is debounce interval for direct key and bit[15:0] is debounce
+ interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+ are used. If bit[X] of the mask is set, the direct key X
+ is used.
+- marvell,direct-key-low-active : Direct key status register
+ tells the level of pins that connects to the direct keyes.
+ When this property is set, it means that when the pin level
+ is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+ the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+ linux key-code for rotary up. Bit[15:0] is the linux key-code
+ for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+ in the device, the value indicates the key-code for relative
+ axes measurement in the device. It is a u32 value. Bit[31:16]
+ is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+ keypad: keypad@d4012000 {
+ keypad,num-rows = <3>;
+ keypad,num-columns = <5>;
+ linux,keymap = <0x0000000e /* KEY_BACKSPACE */
+ 0x0001006b /* KEY_END */
+ 0x00020061 /* KEY_RIGHTCTRL */
+ 0x0003000b /* KEY_0 */
+ 0x00040002 /* KEY_1 */
+ 0x0100008b /* KEY_MENU */
+ 0x01010066 /* KEY_HOME */
+ 0x010200e7 /* KEY_SEND */
+ 0x01030009 /* KEY_8 */
+ 0x0104000a /* KEY_9 */
+ 0x02000160 /* KEY_OK */
+ 0x02010003 /* KEY_2 */
+ 0x02020004 /* KEY_3 */
+ 0x02030005 /* KEY_4 */
+ 0x02040006>; /* KEY_5 */
+ marvell,rotary0 = <0x006c0067>; /* KEY_UP & KEY_DOWN */
+ marvell,direct-key-count = <1>;
+ marvell,direct-key-map = <0x001c>;
+ marvell,debounce-interval = <0x001e001e>;
+ };
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index c9f212a..3b63a12 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -118,6 +118,217 @@ struct pxa27x_keypad {
unsigned int direct_key_mask;
};
+static int pxa27x_keypad_matrix_key_parse_dt(struct pxa27x_keypad *keypad)
+{
+ int ret;
+ u32 rows, cols;
+ struct input_dev *input_dev = keypad->input_dev;
+ struct device *dev = input_dev->dev.parent;
+ struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+
+ ret = matrix_keypad_parse_of_params(dev, &rows, &cols);
+ if (ret)
+ return ret;
+
+ if (rows > MAX_MATRIX_KEY_ROWS || cols > MAX_MATRIX_KEY_COLS) {
+ dev_err(dev, "rows or cols exceeds maximum value\n");
+ return -EINVAL;
+ }
+
+ pdata->matrix_key_rows = rows;
+ pdata->matrix_key_cols = cols;
+
+ ret = matrix_keypad_build_keymap(NULL, NULL,
+ pdata->matrix_key_rows,
+ pdata->matrix_key_cols,
+ keypad->keycodes, input_dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int pxa27x_keypad_direct_key_parse_dt(struct pxa27x_keypad *keypad)
+{
+ const __be16 *prop;
+ unsigned short code;
+ int i, ret;
+ unsigned int proplen, size;
+ struct input_dev *input_dev = keypad->input_dev;
+ struct device *dev = input_dev->dev.parent;
+ struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+ struct device_node *np = dev->of_node;
+
+ ret = of_property_read_u32(np, "marvell,direct-key-count",
+ &pdata->direct_key_num);
+ if (ret) {
+ /*
+ * If do not have marvel,direct-key-count defined,
+ * it means direct key is not supported.
+ */
+ if (ret == -EINVAL)
+ return 0;
+ return ret;
+ }
+ ret = of_property_read_u32(np, "marvell,direct-key-mask",
+ &pdata->direct_key_mask);
+ if (ret && ret != -EINVAL)
+ return ret;
+ /*
+ * If marvell,direct-key-mask is not defined, driver will use
+ * default value. Default value is set when configure the keypad.
+ */
+ else if (ret == -EINVAL)
+ pdata->direct_key_mask = 0;
+
+ pdata->direct_key_low_active = of_property_read_bool(np,
+ "marvell,direct-key-low-active");
+
+ prop = of_get_property(np, "marvell,direct-key-map", &proplen);
+ if (!prop)
+ return -EINVAL;
+
+ if (proplen % sizeof(u16))
+ return -EINVAL;
+
+ size = proplen / sizeof(u16);
+
+ /* Only MAX_DIRECT_KEY_NUM is accepted.*/
+ if (size > MAX_DIRECT_KEY_NUM)
+ return -EINVAL;
+
+ for (i = 0; i < size; i++) {
+ code = be16_to_cpup(prop + i);
+ keypad->keycodes[MAX_MATRIX_KEY_NUM + i] = code;
+ __set_bit(code, input_dev->keybit);
+ }
+
+ return 0;
+}
+
+static int pxa27x_keypad_rotary_parse_dt(struct pxa27x_keypad *keypad)
+{
+ const __be32 *prop;
+ int i, relkey_ret;
+ unsigned int code, proplen;
+ const char *rotaryname[2] = {
+ "marvell,rotary0", "marvell,rotary1"};
+ const char relkeyname[] = {"marvell,rotary-rel-key"};
+ struct input_dev *input_dev = keypad->input_dev;
+ struct device *dev = input_dev->dev.parent;
+ struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
+ struct device_node *np = dev->of_node;
+
+ relkey_ret = of_property_read_u32(np, relkeyname, &code);
+ /* if can read correct rotary key-code, we do not need this. */
+ if (relkey_ret == 0) {
+ unsigned short relcode;
+
+ /* rotary0 taks lower half, rotary1 taks upper half. */
+ relcode = code & 0xffff;
+ pdata->rotary0_rel_code = (code & 0xffff);
+ __set_bit(relcode, input_dev->relbit);
+
+ relcode = code >> 16;
+ pdata->rotary1_rel_code = relcode;
+ __set_bit(relcode, input_dev->relbit);
+ }
+
+ for (i = 0; i < 2; i++) {
+ prop = of_get_property(np, rotaryname[i], &proplen);
+ /*
+ * If the prop is not set, it means keypad does not need
+ * initialize the rotaryX.
+ */
+ if (!prop)
+ continue;
+
+ code = be32_to_cpup(prop);
+ /*
+ * Not all up/down key code are valid.
+ * Now we depends on direct-rel-code.
+ */
+ if ((!(code & 0xffff) || !(code >> 16)) && relkey_ret) {
+ return relkey_ret;
+ } else {
+ unsigned int n = MAX_MATRIX_KEY_NUM + (i << 1);
+ unsigned short keycode;
+
+ keycode = code & 0xffff;
+ keypad->keycodes[n] = keycode;
+ __set_bit(keycode, input_dev->keybit);
+
+ keycode = code >> 16;
+ keypad->keycodes[n + 1] = keycode;
+ __set_bit(keycode, input_dev->keybit);
+
+ if (i == 0)
+ pdata->rotary0_rel_code = -1;
+ else
+ pdata->rotary1_rel_code = -1;
+ }
+ if (i == 0)
+ pdata->enable_rotary0 = 1;
+ else
+ pdata->enable_rotary1 = 1;
+ }
+
+ keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
+ keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
+
+ return 0;
+}
+
+static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
+{
+ int ret;
+ struct input_dev *input_dev = keypad->input_dev;
+ struct device *dev = input_dev->dev.parent;
+ struct device_node *np = dev->of_node;
+
+ if (!keypad->pdata) {
+ keypad->pdata = devm_kzalloc(dev, sizeof(*keypad->pdata),
+ GFP_KERNEL);
+ if (!keypad->pdata) {
+ dev_err(dev, "failed to allocate memory for pdata\n");
+ return -ENOMEM;
+ }
+ }
+
+ ret = pxa27x_keypad_matrix_key_parse_dt(keypad);
+ if (ret) {
+ dev_err(dev, "failed to parse matrix key\n");
+ return ret;
+ }
+
+ ret = pxa27x_keypad_direct_key_parse_dt(keypad);
+ if (ret) {
+ dev_err(dev, "failed to parse direct key\n");
+ return ret;
+ }
+
+ ret = pxa27x_keypad_rotary_parse_dt(keypad);
+ if (ret) {
+ dev_err(dev, "failed to parse rotary key\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "marvell,debounce-interval",
+ &keypad->pdata->debounce_interval);
+ if (ret) {
+ dev_err(dev, "failed to parse debpunce-interval\n");
+ return ret;
+ }
+
+ /*
+ * The keycodes may not only includes matrix key but also the direct
+ * key or rotary key.
+ */
+ input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+
+ return 0;
+}
+
static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
{
struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
@@ -491,15 +702,15 @@ static const struct dev_pm_ops pxa27x_keypad_pm_ops = {
static int pxa27x_keypad_probe(struct platform_device *pdev)
{
struct pxa27x_keypad_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct pxa27x_keypad *keypad;
struct input_dev *input_dev;
struct resource *res;
int irq, error;
- if (pdata == NULL) {
- dev_err(&pdev->dev, "no platform data defined\n");
+ /* Driver need build keycode from device tree or pdata */
+ if (!np && !pdata)
return -EINVAL;
- }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -561,12 +772,18 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
- error = pxa27x_keypad_build_keycode(keypad);
+ if (np)
+ error = pxa27x_keypad_build_keycode_from_dt(keypad);
+ else
+ error = pxa27x_keypad_build_keycode(keypad);
if (error) {
dev_err(&pdev->dev, "failed to build keycode\n");
goto failed_put_clk;
}
+ /* If device tree is supported, pdata will be allocated. */
+ pdata = keypad->pdata;
+
if ((pdata->enable_rotary0 && keypad->rotary_rel_code[0] != -1) ||
(pdata->enable_rotary1 && keypad->rotary_rel_code[1] != -1)) {
input_dev->evbit[0] |= BIT_MASK(EV_REL);
@@ -628,11 +845,18 @@ static int pxa27x_keypad_remove(struct platform_device *pdev)
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:pxa27x-keypad");
+static const struct of_device_id pxa27x_keypad_dt_match[] = {
+ { .compatible = "marvell,pxa27x-keypad" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
+
static struct platform_driver pxa27x_keypad_driver = {
.probe = pxa27x_keypad_probe,
.remove = pxa27x_keypad_remove,
.driver = {
.name = "pxa27x-keypad",
+ .of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &pxa27x_keypad_pm_ops,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
