Hi Bastian,
Thanks for the patch.
On Monday 08 April 2013 14:52:27 Bastian Hecht wrote:
> We no longer need to set up the reset pin for the st1232 in the board
> code, but can pass the GPIO number via the platform data to the driver.
> This results in a cleaner grouping of the device setup.
>
> Signed-off-by: Bastian Hecht <hechtb+renesas@xxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> v2:
> reset_pin changed to reset_gpio
>
> arch/arm/mach-shmobile/board-armadillo800eva.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c
> b/arch/arm/mach-shmobile/board-armadillo800eva.c index bf4c3d2..d1c1ff4
> 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -24,6 +24,7 @@
> #include <linux/err.h>
> #include <linux/kernel.h>
> #include <linux/input.h>
> +#include <linux/input/st1232_pdata.h>
> #include <linux/irq.h>
> #include <linux/platform_device.h>
> #include <linux/gpio.h>
> @@ -997,10 +998,15 @@ static struct platform_device i2c_gpio_device = {
> };
>
> /* I2C */
> +static struct st1232_pdata st1232_i2c0_pdata = {
> + .reset_gpio = 166,
> +};
> +
> static struct i2c_board_info i2c0_devices[] = {
> {
> I2C_BOARD_INFO("st1232-ts", 0x55),
> .irq = irq_pin(10),
> + .platform_data = &st1232_i2c0_pdata,
> },
> {
> I2C_BOARD_INFO("wm8978", 0x1a),
> @@ -1120,7 +1126,6 @@ static void __init eva_init(void)
>
> /* Touchscreen */
> gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */
> - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
>
> /* GETHER */
> gpio_request(GPIO_FN_ET_CRS, NULL);
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
