Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 91 +++++++++++++++++++++++++++++-
1 file changed, 90 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index b0dcae4..3aac912 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -76,6 +76,7 @@
#define MXT_SPT_MESSAGECOUNT_T44 44
#define MXT_SPT_CTECONFIG_T46 46
#define MXT_SPT_NOISESUPPRESSION_T48 48
+#define MXT_PROCI_ACTIVE_STYLUS_T63 63
/* MXT_GEN_MESSAGE_T5 object */
#define MXT_RPTID_NOMSG 0xff
@@ -188,6 +189,19 @@ struct t9_range {
/* Define for MXT_PROCI_TOUCHSUPPRESSION_T42 */
#define MXT_T42_MSG_TCHSUP (1 << 0)
+/* T63 Stylus */
+#define MXT_STYLUS_PRESS (1 << 0)
+#define MXT_STYLUS_RELEASE (1 << 1)
+#define MXT_STYLUS_MOVE (1 << 2)
+#define MXT_STYLUS_SUPPRESS (1 << 3)
+
+#define MXT_STYLUS_DETECT (1 << 4)
+#define MXT_STYLUS_TIP (1 << 5)
+#define MXT_STYLUS_ERASER (1 << 6)
+#define MXT_STYLUS_BARREL (1 << 7)
+
+#define MXT_STYLUS_PRESSURE_MASK 0x3F
+
/* Delay times */
#define MXT_BACKUP_TIME 25 /* msec */
#define MXT_RESET_TIME 200 /* msec */
@@ -260,6 +274,7 @@ struct mxt_data {
bool update_input;
u8 last_message_count;
u8 num_touchids;
+ u8 num_stylusids;
/* Cached parameters from object table */
u16 T5_address;
@@ -273,6 +288,8 @@ struct mxt_data {
u8 T42_reportid_max;
u16 T44_address;
u8 T48_reportid;
+ u8 T63_reportid_min;
+ u8 T63_reportid_max;
};
/* I2C slave address pairs */
@@ -727,6 +744,60 @@ static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
return 0;
}
+static void mxt_proc_t63_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ struct input_dev *input_dev = data->input_dev;
+ u8 id;
+ u16 x, y;
+ u8 pressure;
+
+ if (!input_dev)
+ return;
+
+ /* stylus slots come after touch slots */
+ id = data->num_touchids + (msg[0] - data->T63_reportid_min);
+
+ if (id < 0 || id > (data->num_touchids + data->num_stylusids)) {
+ dev_err(dev, "invalid stylus id %d, max slot is %d\n",
+ id, data->num_stylusids);
+ return;
+ }
+
+ x = msg[3] | (msg[4] << 8);
+ y = msg[5] | (msg[6] << 8);
+ pressure = msg[7] & MXT_STYLUS_PRESSURE_MASK;
+
+ dev_dbg(dev,
+ "[%d] %c%c%c%c x: %d y: %d pressure: %d stylus:%c%c%c%c\n",
+ id,
+ (msg[1] & MXT_STYLUS_SUPPRESS) ? 'S' : '.',
+ (msg[1] & MXT_STYLUS_MOVE) ? 'M' : '.',
+ (msg[1] & MXT_STYLUS_RELEASE) ? 'R' : '.',
+ (msg[1] & MXT_STYLUS_PRESS) ? 'P' : '.',
+ x, y, pressure,
+ (msg[2] & MXT_STYLUS_BARREL) ? 'B' : '.',
+ (msg[2] & MXT_STYLUS_ERASER) ? 'E' : '.',
+ (msg[2] & MXT_STYLUS_TIP) ? 'T' : '.',
+ (msg[2] & MXT_STYLUS_DETECT) ? 'D' : '.');
+
+ input_mt_slot(input_dev, id);
+
+ if (msg[2] & MXT_STYLUS_DETECT) {
+ input_mt_report_slot_state(input_dev, MT_TOOL_PEN, 1);
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+ } else {
+ input_mt_report_slot_state(input_dev, MT_TOOL_PEN, 0);
+ }
+
+ input_report_key(input_dev, BTN_STYLUS, (msg[2] & MXT_STYLUS_ERASER));
+ input_report_key(input_dev, BTN_STYLUS2, (msg[2] & MXT_STYLUS_BARREL));
+
+ mxt_input_sync(input_dev);
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
@@ -742,6 +813,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
&& report_id <= data->T9_reportid_max) {
mxt_proc_t9_message(data, message);
handled = true;
+ } else if (report_id >= data->T63_reportid_min
+ && report_id <= data->T63_reportid_max) {
+ mxt_proc_t63_messages(data, message);
+ handled = true;
} else if (report_id >= data->T42_reportid_min
&& report_id <= data->T42_reportid_max) {
mxt_proc_t42_messages(data, message);
@@ -1413,6 +1488,12 @@ static int mxt_get_object_table(struct mxt_data *data)
case MXT_SPT_NOISESUPPRESSION_T48:
data->T48_reportid = min_id;
break;
+ case MXT_PROCI_ACTIVE_STYLUS_T63:
+ data->T63_reportid_min = min_id;
+ data->T63_reportid_max = max_id;
+ data->num_stylusids =
+ object->num_report_ids * OBP_INSTANCES(object);
+ break;
}
end_address = object->start_address
@@ -1950,7 +2031,7 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
0, 255, 0, 0);
/* For multi touch */
- num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+ num_mt_slots = data->num_touchids + data->num_stylusids;
error = input_mt_init_slots(input_dev, num_mt_slots, 0);
if (error)
goto err_free_mem;
@@ -1966,6 +2047,14 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data)
input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
0, 255, 0, 0);
+ /* For T63 active stylus */
+ if (data->T63_reportid_min) {
+ input_set_capability(input_dev, EV_KEY, BTN_STYLUS);
+ input_set_capability(input_dev, EV_KEY, BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_MAX, 0, 0);
+ }
+
input_set_drvdata(input_dev, data);
error = input_register_device(input_dev);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
