On 01/22/2013 07:24 AM, NeilBrown wrote:
On Mon, 21 Jan 2013 15:57:18 -0800 Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
Hi Ivan,
On Mon, Jan 21, 2013 at 03:15:14PM +0200, Ivan Khoronzhuk wrote:
Rebased on linux_omap/master.
During suspend/resume the key press can be lost if time of resume
sequence is significant.
If press event cannot be remembered then the driver can read the
current button state only in time of interrupt handling. But in some
cases when time between IRQ and IRQ handler is significant we can
read incorrect state. As a particular case, when device is in suspend
we press wakupable key and up it back in a jiffy, the interrupt
handler read the state of up but the interrupt source is press indeed.
As a result, in a OS like android, we resume then suspend right away
because the key state is not changed.
This patch add to gpio_keys framework opportunity to recover lost of
press key event at resuming. The variable "key_pressed" from
gpio_button_data structure is not used for gpio keys, it is only used
for gpio irq keys, so it is logically used to remember press lost
while resuming.
The same could happen if you delay processing of interrupt long enough
during normal operation. If key is released by the time you get around
to reading it you will not see a key press.
To me this sounds like you need to speed up your resume process so that
you can start serving interrupts quicker.
Agreed. When I was looking at this I found that any genuine button press
would have at least 70msec between press and release, while the device could
wake up to the point of being able to handle interrupts in about 14msec.
That is enough of a gap to make it pointless to try to 'fix' the code.
With enough verbose debugging enabled that 14msec can easily grow to
hundreds, but then if you have debugging enabled to can discipline yourself
to hold the button for longer.
Ivan: What sort of delay are you seeing between the button press and the
interrupt routine running? And can you measure how long the button is
typically down for?
NeilBrown
In my case I have the delay between the button press and the ISR
about 145ms. If the button down for 120ms the IRQ press event is
lost and if 160ms event is captured. I cannot speed up resume
process enough to guarantee correct work, so I wrote this fix.
--
Regards,
Ivan Khoronzhuk
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
