[PATCH v5] staging: ste_rmi4: Convert to Type-B support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert to MT-B because Synaptics touch devices are capable
of tracking identifiable fingers.

Signed-off-by: Alexandra Chin <alexandra.chin@xxxxxxxxxxxxxxxx>
---
Changes from v5:
        - Incorporated Henrik's review comments
          *rollback to v3 from v4
          *fix odd line break in v3
        - Include Alexandra in the list of authors

Changes from v4:
        - Incorporated Henrik's review comments
          *split function synpatics_rmi4_touchscreen_report
          *split function synaptics_rmi4_i2c_query_device

Changes from v3:
	- Incorporated Henrik's review comments
	  *remove 'else' after an error path return
	  *add input_mt_sync_frame() for pointer emulation effects
	  *correct names of touchscreen
	- Replace printk with dev_err

Changes from v2:
	- Incorporated Henrik's review comments
	  *directly report finger state with Type-B
	- Against 3.7-rcX
	  *call input_mt_init_slots with INPUT_MT_DIRECT flag
---
 drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c |  245 ++++++++++++-------------
 1 files changed, 114 insertions(+), 131 deletions(-)

diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index 277491a..7b636c7 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -1,10 +1,11 @@
 /**
  *
- * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
- * Copyright (c) 2007-2010, Synaptics Incorporated
+ * Synaptics Register Mapped Interface (RMI4) I2C Touchscreen Driver.
+ * Copyright (c) 2007-2012, Synaptics Incorporated
  *
  * Author: Js HA <js.ha@xxxxxxxxxxxxxx> for ST-Ericsson
  * Author: Naveen Kumar G <naveen.gaddipati@xxxxxxxxxxxxxx> for ST-Ericsson
+ * Author: Alexandra Chin <alexandra.chin@xxxxxxxxxxxxxxxx>
  * Copyright 2010 (c) ST-Ericsson AB
  */
 /*
@@ -31,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
+#include <linux/input/mt.h>
 #include "synaptics_i2c_rmi4.h"
 
 /* TODO: for multiple device support will need a per-device mutex */
@@ -63,12 +65,11 @@
 #define MASK_4BIT		0x0F
 #define MASK_3BIT		0x07
 #define MASK_2BIT		0x03
-#define TOUCHPAD_CTRL_INTR	0x8
+#define TOUCHSCREEN_CTRL_INTR	0x8
 #define PDT_START_SCAN_LOCATION (0x00E9)
 #define PDT_END_SCAN_LOCATION	(0x000A)
 #define PDT_ENTRY_SIZE		(0x0006)
-#define RMI4_NUMBER_OF_MAX_FINGERS		(8)
-#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM	(0x11)
+#define SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM	(0x11)
 #define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM	(0x01)
 
 /**
@@ -164,6 +165,7 @@ struct synaptics_rmi4_device_info {
  * @regulator: pointer to the regulator structure
  * @wait: wait queue structure variable
  * @touch_stopped: flag to stop the thread function
+ * @fingers_supported: maximum supported fingers
  *
  * This structure gives the device data information.
  */
@@ -184,6 +186,7 @@ struct synaptics_rmi4_data {
 	struct regulator	*regulator;
 	wait_queue_head_t	wait;
 	bool			touch_stopped;
+	unsigned char		fingers_supported;
 };
 
 /**
@@ -291,34 +294,33 @@ exit:
 }
 
 /**
- * synpatics_rmi4_touchpad_report() - reports for the rmi4 touchpad device
+ * synpatics_rmi4_touchscreen_report() - reports for the rmi4 touchscreen device
  * @pdata: pointer to synaptics_rmi4_data structure
  * @rfi: pointer to synaptics_rmi4_fn structure
  *
- * This function calls to reports for the rmi4 touchpad device
+ * This function calls to reports for the rmi4 touchscreen device
  */
-static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
+static int synpatics_rmi4_touchscreen_report(struct synaptics_rmi4_data *pdata,
 						struct synaptics_rmi4_fn *rfi)
 {
 	/* number of touch points - fingers down in this case */
 	int	touch_count = 0;
 	int	finger;
-	int	fingers_supported;
 	int	finger_registers;
 	int	reg;
 	int	finger_shift;
 	int	finger_status;
 	int	retval;
+	int	x, y;
+	int	wx, wy;
 	unsigned short	data_base_addr;
 	unsigned short	data_offset;
 	unsigned char	data_reg_blk_size;
 	unsigned char	values[2];
 	unsigned char	data[DATA_LEN];
-	int	x[RMI4_NUMBER_OF_MAX_FINGERS];
-	int	y[RMI4_NUMBER_OF_MAX_FINGERS];
-	int	wx[RMI4_NUMBER_OF_MAX_FINGERS];
-	int	wy[RMI4_NUMBER_OF_MAX_FINGERS];
+	unsigned char	fingers_supported = pdata->fingers_supported;
 	struct	i2c_client *client = pdata->i2c_client;
+	struct	input_dev *input_dev = pdata->input_dev;
 
 	/* get 2D sensor finger data */
 	/*
@@ -333,7 +335,6 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
 	 *	10 = finger present but data may not be accurate,
 	 *	11 = reserved for product use.
 	 */
-	fingers_supported	= rfi->num_of_data_points;
 	finger_registers	= (fingers_supported + 3)/4;
 	data_base_addr		= rfi->fn_desc.data_base_addr;
 	retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
@@ -353,12 +354,16 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
 		reg = finger/4;
 		/* bit shift to get finger's status */
 		finger_shift	= (finger % 4) * 2;
-		finger_status	= (values[reg] >> finger_shift) & 3;
+		finger_status	= (values[reg] >> finger_shift) & MASK_2BIT;
 		/*
 		 * if finger status indicates a finger is present then
 		 * read the finger data and report it
 		 */
-		if (finger_status == 1 || finger_status == 2) {
+		input_mt_slot(input_dev, finger);
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+							finger_status != 0);
+
+		if (finger_status) {
 			/* Read the finger data */
 			data_offset = data_base_addr +
 					((finger * data_reg_blk_size) +
@@ -367,50 +372,33 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
 						data_offset, data,
 						data_reg_blk_size);
 			if (retval != data_reg_blk_size) {
-				printk(KERN_ERR "%s:read data failed\n",
+				dev_err(&client->dev, "%s:read data failed\n",
 								__func__);
 				return 0;
-			} else {
-				x[touch_count]	=
-					(data[0] << 4) | (data[2] & MASK_4BIT);
-				y[touch_count]	=
-					(data[1] << 4) |
-					((data[2] >> 4) & MASK_4BIT);
-				wy[touch_count]	=
-						(data[3] >> 4) & MASK_4BIT;
-				wx[touch_count]	=
-						(data[3] & MASK_4BIT);
-
-				if (pdata->board->x_flip)
-					x[touch_count] =
-						pdata->sensor_max_x -
-								x[touch_count];
-				if (pdata->board->y_flip)
-					y[touch_count] =
-						pdata->sensor_max_y -
-								y[touch_count];
 			}
+			x = (data[0] << 4) | (data[2] & MASK_4BIT);
+			y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
+			wy = (data[3] >> 4) & MASK_4BIT;
+			wx = (data[3] & MASK_4BIT);
+
+			if (pdata->board->x_flip)
+				x = pdata->sensor_max_x - x;
+			if (pdata->board->y_flip)
+				y = pdata->sensor_max_y - y;
+
+			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+								max(wx, wy));
+			input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+			input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+
 			/* number of active touch points */
 			touch_count++;
 		}
 	}
 
-	/* report to input subsystem */
-	if (touch_count) {
-		for (finger = 0; finger < touch_count; finger++) {
-			input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
-						max(wx[finger] , wy[finger]));
-			input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
-								x[finger]);
-			input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
-								y[finger]);
-			input_mt_sync(pdata->input_dev);
-		}
-	} else
-		input_mt_sync(pdata->input_dev);
-
 	/* sync after groups of events */
-	input_sync(pdata->input_dev);
+	input_mt_sync_frame(input_dev);
+	input_sync(input_dev);
 	/* return the number of touch points */
 	return touch_count;
 }
@@ -428,13 +416,13 @@ static int synaptics_rmi4_report_device(struct synaptics_rmi4_data *pdata,
 	int touch = 0;
 	struct	i2c_client *client = pdata->i2c_client;
 	static int num_error_reports;
-	if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
+	if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM) {
 		num_error_reports++;
 		if (num_error_reports < MAX_ERROR_REPORT)
 			dev_err(&client->dev, "%s:report not supported\n",
 								__func__);
 	} else
-		touch = synpatics_rmi4_touchpad_report(pdata, rfi);
+		touch = synpatics_rmi4_touchscreen_report(pdata, rfi);
 	return touch;
 }
 /**
@@ -510,15 +498,15 @@ static irqreturn_t synaptics_rmi4_irq(int irq, void *data)
 }
 
 /**
- * synpatics_rmi4_touchpad_detect() - detects the rmi4 touchpad device
+ * synpatics_rmi4_touchscreen_detect() - detects the rmi4 touchscreen device
  * @pdata: pointer to synaptics_rmi4_data structure
  * @rfi: pointer to synaptics_rmi4_fn structure
  * @fd: pointer to synaptics_rmi4_fn_desc structure
  * @interruptcount: count the number of interrupts
  *
- * This function calls to detects the rmi4 touchpad device
+ * This function calls to detects the rmi4 touchscreen device
  */
-static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
+static int synpatics_rmi4_touchscreen_detect(struct synaptics_rmi4_data *pdata,
 					struct synaptics_rmi4_fn *rfi,
 					struct synaptics_rmi4_fn_desc *fd,
 					unsigned int interruptcount)
@@ -575,6 +563,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
 		if ((queries[1] & MASK_3BIT) == 5)
 			rfi->num_of_data_points = 10;
 	}
+	pdata->fingers_supported = rfi->num_of_data_points;
 	/* Need to get interrupt info for handling interrupts */
 	rfi->index_to_intr_reg = (interruptcount + 7)/8;
 	if (rfi->index_to_intr_reg != 0)
@@ -655,13 +644,13 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
 }
 
 /**
- * synaptics_rmi4_touchpad_config() - configures the rmi4 touchpad device
+ * synaptics_rmi4_touchscreen_config() - configures the rmi4 touchscreen device
  * @pdata: pointer to synaptics_rmi4_data structure
  * @rfi: pointer to synaptics_rmi4_fn structure
  *
- * This function calls to configures the rmi4 touchpad device
+ * This function calls to configures the rmi4 touchscreen device
  */
-int synaptics_rmi4_touchpad_config(struct synaptics_rmi4_data *pdata,
+int synaptics_rmi4_touchscreen_config(struct synaptics_rmi4_data *pdata,
 						struct synaptics_rmi4_fn *rfi)
 {
 	/*
@@ -741,51 +730,7 @@ static int synaptics_rmi4_i2c_query_device(struct synaptics_rmi4_data *pdata)
 			return -EIO;
 		}
 		rfi = NULL;
-		if (rmi_fd.fn_number) {
-			switch (rmi_fd.fn_number & MASK_8BIT) {
-			case SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM:
-				pdata->fn01_query_base_addr =
-						rmi_fd.query_base_addr;
-				pdata->fn01_ctrl_base_addr =
-						rmi_fd.ctrl_base_addr;
-				pdata->fn01_data_base_addr =
-						rmi_fd.data_base_addr;
-				break;
-			case SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM:
-				if (rmi_fd.intr_src_count) {
-					rfi = kmalloc(sizeof(*rfi),
-								GFP_KERNEL);
-					if (!rfi) {
-						dev_err(&client->dev,
-							"%s:kmalloc failed\n",
-								__func__);
-							return -ENOMEM;
-					}
-					retval = synpatics_rmi4_touchpad_detect
-								(pdata,	rfi,
-								&rmi_fd,
-								intr_count);
-					if (retval < 0) {
-						kfree(rfi);
-						return retval;
-					}
-				}
-				break;
-			}
-			/* interrupt count for next iteration */
-			intr_count += (rmi_fd.intr_src_count & MASK_3BIT);
-			/*
-			 * We only want to add functions to the list
-			 * that have data associated with them.
-			 */
-			if (rfi && rmi_fd.intr_src_count) {
-				/* link this function info to the RMI module */
-				mutex_lock(&(pdata->fn_list_mutex));
-				list_add_tail(&rfi->link,
-					&pdata->rmi4_mod_info.support_fn_list);
-				mutex_unlock(&(pdata->fn_list_mutex));
-			}
-		} else {
+		if (!rmi_fd.fn_number) {
 			/*
 			 * A zero in the function number
 			 * signals the end of the PDT
@@ -794,6 +739,47 @@ static int synaptics_rmi4_i2c_query_device(struct synaptics_rmi4_data *pdata)
 				"%s:end of PDT\n", __func__);
 			break;
 		}
+		switch (rmi_fd.fn_number & MASK_8BIT) {
+		case SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM:
+			pdata->fn01_query_base_addr =
+					rmi_fd.query_base_addr;
+			pdata->fn01_ctrl_base_addr =
+					rmi_fd.ctrl_base_addr;
+			pdata->fn01_data_base_addr =
+					rmi_fd.data_base_addr;
+			break;
+		case SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM:
+			if (rmi_fd.intr_src_count) {
+				rfi = kmalloc(sizeof(*rfi), GFP_KERNEL);
+				if (!rfi) {
+					dev_err(&client->dev,
+						"%s:kmalloc failed\n",
+							__func__);
+					return -ENOMEM;
+				}
+				retval = synpatics_rmi4_touchscreen_detect(
+							pdata, rfi, &rmi_fd,
+							intr_count);
+				if (retval < 0) {
+					kfree(rfi);
+					return retval;
+				}
+			}
+			break;
+		}
+		/* interrupt count for next iteration */
+		intr_count += (rmi_fd.intr_src_count & MASK_3BIT);
+		/*
+		 * We only want to add functions to the list
+		 * that have data associated with them.
+		 */
+		if (rfi && rmi_fd.intr_src_count) {
+			/* link this function info to the RMI module */
+			mutex_lock(&(pdata->fn_list_mutex));
+			list_add_tail(&rfi->link,
+				&pdata->rmi4_mod_info.support_fn_list);
+			mutex_unlock(&(pdata->fn_list_mutex));
+		}
 	}
 	/*
 	 * calculate the interrupt register count - used in the
@@ -849,33 +835,28 @@ static int synaptics_rmi4_i2c_query_device(struct synaptics_rmi4_data *pdata)
 
 	list_for_each_entry(rfi, &pdata->rmi4_mod_info.support_fn_list, link)
 		data_sources += rfi->num_of_data_sources;
-	if (data_sources) {
-		rmi = &(pdata->rmi4_mod_info);
-		list_for_each_entry(rfi, &rmi->support_fn_list, link) {
-			if (rfi->num_of_data_sources) {
-				if (rfi->fn_number ==
-					SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
-					retval = synaptics_rmi4_touchpad_config
-								(pdata, rfi);
-					if (retval < 0)
-						return retval;
-				} else
-					dev_err(&client->dev,
-						"%s:fn_number not supported\n",
+	if (!data_sources)
+		return 0;
+	rmi = &(pdata->rmi4_mod_info);
+	list_for_each_entry(rfi, &rmi->support_fn_list, link) {
+		if (!rfi->num_of_data_sources)
+			continue;
+		if (rfi->fn_number == SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM) {
+			retval = synaptics_rmi4_touchscreen_config(pdata, rfi);
+			if (retval < 0)
+				return retval;
+		} else
+			dev_err(&client->dev, "%s:fn_number not supported\n",
 								__func__);
-				/*
-				 * Turn on interrupts for this
-				 * function's data sources.
-				 */
-				ctrl_offset = pdata->fn01_ctrl_base_addr + 1 +
-							rfi->index_to_intr_reg;
-				retval = synaptics_rmi4_i2c_byte_write(pdata,
-							ctrl_offset,
+		/*
+		 * Turn on interrupts for this function's data sources.
+		 */
+		ctrl_offset = pdata->fn01_ctrl_base_addr + 1 +
+						rfi->index_to_intr_reg;
+		retval = synaptics_rmi4_i2c_byte_write(pdata, ctrl_offset,
 							rfi->intr_mask);
-				if (retval < 0)
-					return retval;
-			}
-		}
+		if (retval < 0)
+			return retval;
 	}
 	return 0;
 }
@@ -988,6 +969,8 @@ static int __devinit synaptics_rmi4_probe
 					rmi4_data->sensor_max_y, 0, 0);
 	input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
 						MAX_TOUCH_MAJOR, 0, 0);
+	input_mt_init_slots(rmi4_data->input_dev,
+				rmi4_data->fingers_supported, INPUT_MT_DIRECT);
 
 	/* Clear interrupts */
 	synaptics_rmi4_i2c_block_read(rmi4_data,
@@ -1076,7 +1059,7 @@ static int synaptics_rmi4_suspend(struct device *dev)
 
 	retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
 					rmi4_data->fn01_ctrl_base_addr + 1,
-					(intr_status & ~TOUCHPAD_CTRL_INTR));
+					(intr_status & ~TOUCHSCREEN_CTRL_INTR));
 	if (retval < 0)
 		return retval;
 
@@ -1112,7 +1095,7 @@ static int synaptics_rmi4_resume(struct device *dev)
 
 	retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
 					rmi4_data->fn01_ctrl_base_addr + 1,
-					(intr_status | TOUCHPAD_CTRL_INTR));
+					(intr_status | TOUCHSCREEN_CTRL_INTR));
 	if (retval < 0)
 		return retval;
 
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux