Hi Henrik,
> > This patch converts to MT-B because Synaptics touch devices are
> > capable of tracking identifiable fingers
> >
> > This patch was tested on pandaboard, except input_mt_sync_frame(),
> > which is a quite new function.
>
> I am not sure how to interpret this. Is the patch untested, or tested
> on something different from a pandaboard?
My validation platform is pandaboard. However kernel running on pandaboard
Have not been updated to 3.7, therefore kernel does not contain function
input_mt_sync_frame(). When I tested my patch on pandaboard, I modified
the patch to call function input_mt_report_pointer_emulation(), instead of
calling function input_mt_sync_frame(). I think calling
input_mt_report_pointer_emulation() or input_mt_sync_frame()
should have the same results.
Please let me know if my understanding is incorrect.
> > I changed to use sylpheed as my mail client. Please let me know
> > if there is any problem.
> > Greatly appreciate your time.
>
> As mentioned, the commit message of the patch should not contain mail
> conversation.
Oh, I see! I should move conversation message to the outside of the patch
content. Thanks for your reminder.
> > drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 122
> ++++++++++++-------------
> > 1 files changed, 57 insertions(+), 65 deletions(-)
> >
> > diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> > index 277491a..7876f6b 100644
> > --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> > +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
> > @@ -1,7 +1,7 @@
> > /**
> > *
> > - * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
> > - * Copyright (c) 2007-2010, Synaptics Incorporated
> > + * Synaptics Register Mapped Interface (RMI4) I2C Touchscreen Driver.
> > + * Copyright (c) 2007-2012, Synaptics Incorporated
> > *
> > * Author: Js HA <js.ha@xxxxxxxxxxxxxx> for ST-Ericsson
> > * Author: Naveen Kumar G <naveen.gaddipati@xxxxxxxxxxxxxx> for
> ST-Ericsson
> > @@ -31,6 +31,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/regulator/consumer.h>
> > #include <linux/module.h>
> > +#include <linux/input/mt.h>
> > #include "synaptics_i2c_rmi4.h"
> >
> > /* TODO: for multiple device support will need a per-device mutex */
> > @@ -63,12 +64,11 @@
> > #define MASK_4BIT 0x0F
> > #define MASK_3BIT 0x07
> > #define MASK_2BIT 0x03
> > -#define TOUCHPAD_CTRL_INTR 0x8
> > +#define TOUCHSCREEN_CTRL_INTR 0x8
> > #define PDT_START_SCAN_LOCATION (0x00E9)
> > #define PDT_END_SCAN_LOCATION (0x000A)
> > #define PDT_ENTRY_SIZE (0x0006)
> > -#define RMI4_NUMBER_OF_MAX_FINGERS (8)
> > -#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
> > +#define SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM (0x11)
> > #define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
> >
> > /**
> > @@ -164,6 +164,7 @@ struct synaptics_rmi4_device_info {
> > * @regulator: pointer to the regulator structure
> > * @wait: wait queue structure variable
> > * @touch_stopped: flag to stop the thread function
> > + * @fingers_supported: maximum supported fingers
> > *
> > * This structure gives the device data information.
> > */
> > @@ -184,6 +185,7 @@ struct synaptics_rmi4_data {
> > struct regulator *regulator;
> > wait_queue_head_t wait;
> > bool touch_stopped;
> > + unsigned char fingers_supported;
> > };
> >
> > /**
> > @@ -291,34 +293,33 @@ exit:
> > }
> >
> > /**
> > - * synpatics_rmi4_touchpad_report() - reports for the rmi4 touchpad device
> > + * synpatics_rmi4_touchscreen_report() - reports for the rmi4 touchscreen
> device
> > * @pdata: pointer to synaptics_rmi4_data structure
> > * @rfi: pointer to synaptics_rmi4_fn structure
> > *
> > - * This function calls to reports for the rmi4 touchpad device
> > + * This function calls to reports for the rmi4 touchscreen device
> > */
> > -static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
> > +static int synpatics_rmi4_touchscreen_report(struct synaptics_rmi4_data
> *pdata,
> > struct synaptics_rmi4_fn *rfi)
> > {
> > /* number of touch points - fingers down in this case */
> > int touch_count = 0;
> > int finger;
> > - int fingers_supported;
> > int finger_registers;
> > int reg;
> > int finger_shift;
> > int finger_status;
> > int retval;
> > + int x, y;
> > + int wx, wy;
> > unsigned short data_base_addr;
> > unsigned short data_offset;
> > unsigned char data_reg_blk_size;
> > unsigned char values[2];
> > unsigned char data[DATA_LEN];
> > - int x[RMI4_NUMBER_OF_MAX_FINGERS];
> > - int y[RMI4_NUMBER_OF_MAX_FINGERS];
> > - int wx[RMI4_NUMBER_OF_MAX_FINGERS];
> > - int wy[RMI4_NUMBER_OF_MAX_FINGERS];
> > + unsigned char fingers_supported = pdata->fingers_supported;
> > struct i2c_client *client = pdata->i2c_client;
> > + struct input_dev *input_dev = pdata->input_dev;
>
> The patch is definitely an improvement over the existing code, but I
> would very much recommend a follow-up patch which splits this
> function.
>
I agree.
> >
> > /* get 2D sensor finger data */
> > /*
> > @@ -333,7 +334,6 @@ static int synpatics_rmi4_touchpad_report(struct
> synaptics_rmi4_data *pdata,
> > * 10 = finger present but data may not be accurate,
> > * 11 = reserved for product use.
> > */
> > - fingers_supported = rfi->num_of_data_points;
> > finger_registers = (fingers_supported + 3)/4;
> > data_base_addr = rfi->fn_desc.data_base_addr;
> > retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
> > @@ -353,12 +353,16 @@ static int synpatics_rmi4_touchpad_report(struct
> synaptics_rmi4_data *pdata,
> > reg = finger/4;
> > /* bit shift to get finger's status */
> > finger_shift = (finger % 4) * 2;
> > - finger_status = (values[reg] >> finger_shift) & 3;
> > + finger_status = (values[reg] >> finger_shift) & MASK_2BIT;
> > /*
> > * if finger status indicates a finger is present then
> > * read the finger data and report it
> > */
> > - if (finger_status == 1 || finger_status == 2) {
> > + input_mt_slot(input_dev, finger);
> > + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
> > + finger_status != 0);
> > +
> > + if (finger_status) {
> > /* Read the finger data */
> > data_offset = data_base_addr +
> > ((finger * data_reg_blk_size) +
> > @@ -367,50 +371,33 @@ static int synpatics_rmi4_touchpad_report(struct
> synaptics_rmi4_data *pdata,
> > data_offset, data,
> > data_reg_blk_size);
> > if (retval != data_reg_blk_size) {
> > - printk(KERN_ERR "%s:read data failed\n",
> > + dev_err(&client->dev, "%s:read data failed\n",
> > __func__);
> > return 0;
> > - } else {
> > - x[touch_count] =
> > - (data[0] << 4) | (data[2] & MASK_4BIT);
> > - y[touch_count] =
> > - (data[1] << 4) |
> > - ((data[2] >> 4) & MASK_4BIT);
> > - wy[touch_count] =
> > - (data[3] >> 4) & MASK_4BIT;
> > - wx[touch_count] =
> > - (data[3] & MASK_4BIT);
> > -
> > - if (pdata->board->x_flip)
> > - x[touch_count] =
> > - pdata->sensor_max_x -
> > - x[touch_count];
> > - if (pdata->board->y_flip)
> > - y[touch_count] =
> > - pdata->sensor_max_y -
> > - y[touch_count];
> > }
> > + x = (data[0] << 4) | (data[2] & MASK_4BIT);
> > + y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
> > + wy = (data[3] >> 4) & MASK_4BIT;
> > + wx = (data[3] & MASK_4BIT);
> > +
> > + if (pdata->board->x_flip)
> > + x = pdata->sensor_max_x - x;
> > + if (pdata->board->y_flip)
> > + y = pdata->sensor_max_y - y;
> > +
> > + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
> > + max(wx, wy));
> > + input_report_abs(input_dev, ABS_MT_POSITION_X, x);
> > + input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
> > +
> > /* number of active touch points */
> > touch_count++;
> > }
> > }
> >
> > - /* report to input subsystem */
> > - if (touch_count) {
> > - for (finger = 0; finger < touch_count; finger++) {
> > - input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
> > - max(wx[finger] , wy[finger]));
> > - input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
> > - x[finger]);
> > - input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
> > - y[finger]);
> > - input_mt_sync(pdata->input_dev);
> > - }
> > - } else
> > - input_mt_sync(pdata->input_dev);
> > -
> > /* sync after groups of events */
> > - input_sync(pdata->input_dev);
> > + input_mt_sync_frame(input_dev);
> > + input_sync(input_dev);
> > /* return the number of touch points */
> > return touch_count;
> > }
> > @@ -428,13 +415,13 @@ static int synaptics_rmi4_report_device(struct
> synaptics_rmi4_data *pdata,
> > int touch = 0;
> > struct i2c_client *client = pdata->i2c_client;
> > static int num_error_reports;
> > - if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
> > + if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM) {
> > num_error_reports++;
> > if (num_error_reports < MAX_ERROR_REPORT)
> > dev_err(&client->dev, "%s:report not supported\n",
> > __func__);
> > } else
> > - touch = synpatics_rmi4_touchpad_report(pdata, rfi);
> > + touch = synpatics_rmi4_touchscreen_report(pdata, rfi);
> > return touch;
> > }
> > /**
> > @@ -510,15 +497,15 @@ static irqreturn_t synaptics_rmi4_irq(int irq, void
> *data)
> > }
> >
> > /**
> > - * synpatics_rmi4_touchpad_detect() - detects the rmi4 touchpad device
> > + * synpatics_rmi4_touchscreen_detect() - detects the rmi4 touchscreen device
> > * @pdata: pointer to synaptics_rmi4_data structure
> > * @rfi: pointer to synaptics_rmi4_fn structure
> > * @fd: pointer to synaptics_rmi4_fn_desc structure
> > * @interruptcount: count the number of interrupts
> > *
> > - * This function calls to detects the rmi4 touchpad device
> > + * This function calls to detects the rmi4 touchscreen device
> > */
> > -static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
> > +static int synpatics_rmi4_touchscreen_detect(struct synaptics_rmi4_data
> *pdata,
> > struct synaptics_rmi4_fn *rfi,
> > struct synaptics_rmi4_fn_desc *fd,
> > unsigned int interruptcount)
> > @@ -575,6 +562,7 @@ static int synpatics_rmi4_touchpad_detect(struct
> synaptics_rmi4_data *pdata,
> > if ((queries[1] & MASK_3BIT) == 5)
> > rfi->num_of_data_points = 10;
> > }
> > + pdata->fingers_supported = rfi->num_of_data_points;
> > /* Need to get interrupt info for handling interrupts */
> > rfi->index_to_intr_reg = (interruptcount + 7)/8;
> > if (rfi->index_to_intr_reg != 0)
> > @@ -655,13 +643,13 @@ static int synpatics_rmi4_touchpad_detect(struct
> synaptics_rmi4_data *pdata,
> > }
> >
> > /**
> > - * synaptics_rmi4_touchpad_config() - configures the rmi4 touchpad device
> > + * synaptics_rmi4_touchscreen_config() - configures the rmi4 touchscreen
> device
> > * @pdata: pointer to synaptics_rmi4_data structure
> > * @rfi: pointer to synaptics_rmi4_fn structure
> > *
> > - * This function calls to configures the rmi4 touchpad device
> > + * This function calls to configures the rmi4 touchscreen device
> > */
> > -int synaptics_rmi4_touchpad_config(struct synaptics_rmi4_data *pdata,
> > +int synaptics_rmi4_touchscreen_config(struct synaptics_rmi4_data *pdata,
> > struct synaptics_rmi4_fn *rfi)
> > {
> > /*
> > @@ -751,7 +739,7 @@ static int synaptics_rmi4_i2c_query_device(struct
> synaptics_rmi4_data *pdata)
> > pdata->fn01_data_base_addr =
> > rmi_fd.data_base_addr;
> > break;
> > - case SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM:
> > + case SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM:
> > if (rmi_fd.intr_src_count) {
> > rfi = kmalloc(sizeof(*rfi),
> > GFP_KERNEL);
> > @@ -761,7 +749,8 @@ static int synaptics_rmi4_i2c_query_device(struct
> synaptics_rmi4_data *pdata)
> > __func__);
> > return -ENOMEM;
> > }
> > - retval = synpatics_rmi4_touchpad_detect
> > + retval =
> > + synpatics_rmi4_touchscreen_detect
> > (pdata, rfi,
> > &rmi_fd,
> > intr_count);
>
> Odd line break is a clear sign that something could be broken out into its own
> function.
>
I totally agree with you.
> > @@ -854,8 +843,9 @@ static int synaptics_rmi4_i2c_query_device(struct
> synaptics_rmi4_data *pdata)
> > list_for_each_entry(rfi, &rmi->support_fn_list, link) {
> > if (rfi->num_of_data_sources) {
> > if (rfi->fn_number ==
> > - SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
> > - retval = synaptics_rmi4_touchpad_config
> > + SYNAPTICS_RMI4_TOUCHSCREEN_FUNC_NUM) {
> > + retval =
> > + synaptics_rmi4_touchscreen_config
> > (pdata, rfi);
> > if (retval < 0)
> > return retval;
>
> Same here.
>
> > @@ -988,6 +978,8 @@ static int __devinit synaptics_rmi4_probe
> > rmi4_data->sensor_max_y, 0, 0);
> > input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
> > MAX_TOUCH_MAJOR, 0, 0);
> > + input_mt_init_slots(rmi4_data->input_dev,
> > + rmi4_data->fingers_supported, INPUT_MT_DIRECT);
> >
> > /* Clear interrupts */
> > synaptics_rmi4_i2c_block_read(rmi4_data,
> > @@ -1076,7 +1068,7 @@ static int synaptics_rmi4_suspend(struct device *dev)
> >
> > retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
> > rmi4_data->fn01_ctrl_base_addr + 1,
> > - (intr_status & ~TOUCHPAD_CTRL_INTR));
> > + (intr_status & ~TOUCHSCREEN_CTRL_INTR));
> > if (retval < 0)
> > return retval;
> >
> > @@ -1112,7 +1104,7 @@ static int synaptics_rmi4_resume(struct device *dev)
> >
> > retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
> > rmi4_data->fn01_ctrl_base_addr + 1,
> > - (intr_status | TOUCHPAD_CTRL_INTR));
> > + (intr_status | TOUCHSCREEN_CTRL_INTR));
> > if (retval < 0)
> > return retval;
> >
> > --
> > 1.7.5.4
> >
>
> Ok, with a final polish and a proper commit message, this looks like it will work.
>
> Thanks,
> Henrik
I will fix these issues and recommit a patch ASAP.
I really appreciate your recommendation.
Alexandra
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
