Only fine tuning variance present in tslib utility
does not help in removing all the wanted ADC noise.
This logic of filtering is necessary to get this
touchscreen to work finely.
Signed-off-by: Patil, Rachna <rachna@xxxxxx>
---
drivers/input/touchscreen/ti_am335x_tsc.c | 15 ++++++++++++++-
1 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 6a817a8..7a26810 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -32,6 +32,8 @@
#define ADCFSM_STEPID 0x10
#define SEQ_SETTLE 275
#define MAX_12BIT ((1 << 12) - 1)
+#define TSCADC_DELTA_X 15
+#define TSCADC_DELTA_Y 15
/*
* Refer to function regbit_map() to
@@ -51,6 +53,8 @@ struct titsc {
unsigned int wires;
unsigned int x_plate_resistance;
unsigned int enable_bits;
+ unsigned int bckup_x;
+ unsigned int bckup_y;
bool pen_down;
int steps_to_configure;
int config_inp[20];
@@ -309,12 +313,18 @@ static irqreturn_t titsc_irq(int irq, void *dev)
unsigned int z1, z2, z;
unsigned int fsm;
unsigned int fifo1count, fifo0count;
+ unsigned int diffx = 0, diffy = 0;
int i;
status = titsc_readl(ts_dev, REG_IRQSTATUS);
if (status & IRQENB_FIFO0THRES) {
titsc_read_coordinates(ts_dev, &x, &y);
+ diffx = abs(x - (ts_dev->bckup_x));
+ diffy = abs(y - (ts_dev->bckup_y));
+ ts_dev->bckup_x = x;
+ ts_dev->bckup_y = y;
+
z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
@@ -338,7 +348,8 @@ static irqreturn_t titsc_irq(int irq, void *dev)
z /= z1;
z = (z + 2047) >> 12;
- if (z <= MAX_12BIT) {
+ if ((diffx < TSCADC_DELTA_X) &&
+ (diffy < TSCADC_DELTA_Y) && (z <= MAX_12BIT)) {
input_report_abs(input_dev, ABS_X, x);
input_report_abs(input_dev, ABS_Y, y);
input_report_abs(input_dev, ABS_PRESSURE, z);
@@ -361,6 +372,8 @@ static irqreturn_t titsc_irq(int irq, void *dev)
fsm = titsc_readl(ts_dev, REG_ADCFSM);
if (fsm == ADCFSM_STEPID) {
ts_dev->pen_down = false;
+ ts_dev->bckup_x = 0;
+ ts_dev->bckup_y = 0;
input_report_key(input_dev, BTN_TOUCH, 0);
input_report_abs(input_dev, ABS_PRESSURE, 0);
input_sync(input_dev);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
