From: G, Manjunath Kondaiah <manjugk@xxxxxx>
SMSC ECE1099 is a keyboard scan or GPIO expansion device.The device
supports a keypad scan matrix of 23*8.This driver uses this
device as a keypad driver.
Tested on omap5430 evm with 3.6-rc6 custom kernel.
Cc: Benoit Cousson <b-cousson@xxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx>
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Signed-off-by: G, Manjunath Kondaiah <manjugk@xxxxxx>
Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx>
Acked-by: Felipe Balbi <balbi@xxxxxx>
---
This patch was posted as a series initially
http://www.spinics.net/lists/linux-omap/msg78772.html
But the parent mfd driver has beeen already picked by mfd maintainer.
So this patch can now posted as an standalone patch.
v3->v4:
Fix Dmitry's comments:
- Error patch(input_free_device/input_unregister_device).
- Few cleanups.
- Included INPUT_MATRIXKMAP
drivers/input/keyboard/Kconfig | 12 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/smsc-ece1099-keypad.c | 303 ++++++++++++++++++++++++++
3 files changed, 316 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/keyboard/smsc-ece1099-keypad.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c50fa75..e370b03 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -593,6 +593,18 @@ config KEYBOARD_TWL4030
To compile this driver as a module, choose M here: the
module will be called twl4030_keypad.
+config KEYBOARD_SMSC
+ tristate "SMSC ECE1099 keypad support"
+ depends on I2C
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if your board use the smsc keypad controller
+ for omap5 defconfig. It's safe to say enable this
+ even on boards that don't use the keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc-ece1099-keypad.
+
config KEYBOARD_XTKBD
tristate "XT keyboard"
select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 44e7600..0f2aa26 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -52,5 +52,6 @@ obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
+obj-$(CONFIG_KEYBOARD_SMSC) += smsc-ece1099-keypad.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
diff --git a/drivers/input/keyboard/smsc-ece1099-keypad.c b/drivers/input/keyboard/smsc-ece1099-keypad.c
new file mode 100644
index 0000000..a4a0dfe
--- /dev/null
+++ b/drivers/input/keyboard/smsc-ece1099-keypad.c
@@ -0,0 +1,303 @@
+/*
+ * SMSC_ECE1099 Keypad driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/smsc.h>
+#include <linux/of_gpio.h>
+#include <linux/of.h>
+
+#define KEYPRESS_TIME 200
+
+struct smsc_keypad {
+ struct smsc *smsc;
+ struct matrix_keymap_data *keymap_data;
+ unsigned int last_key_state[16];
+ unsigned int last_col;
+ unsigned int last_key_ms[16];
+ unsigned short *keymap;
+ struct i2c_client *client;
+ struct input_dev *input;
+ int rows, cols;
+ int row_shift;
+ bool no_autorepeat;
+ unsigned irq;
+ struct device *dev;
+};
+
+static void smsc_kp_scan(struct smsc_keypad *kp)
+{
+ struct input_dev *input = kp->input;
+ int i, j;
+ int row, col;
+ int temp, code;
+ unsigned int new_state[16];
+ unsigned int bits_changed;
+ int this_ms;
+
+ smsc_write(kp->dev, SMSC_KP_INT_MASK, 0x00);
+ smsc_write(kp->dev, SMSC_KP_INT_STAT, 0xFF);
+
+ /* Scan for row and column */
+ for (i = 0; i < kp->cols; i++) {
+ smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_EVAL + i);
+ /* Read Row Status */
+ smsc_read(kp->dev, SMSC_KP_IN, &temp);
+ if (temp == 0xFF)
+ continue;
+
+ col = i;
+ for (j = 0; j < kp->rows; j++) {
+ if ((temp & 0x01) != 0x00) {
+ temp = temp >> 1;
+ continue;
+ }
+
+ row = j;
+ new_state[col] = (1 << row);
+ bits_changed = kp->last_key_state[col] ^ new_state[col];
+ this_ms = jiffies_to_msecs(jiffies);
+ if (bits_changed != 0 || (!bits_changed &&
+ ((this_ms - kp->last_key_ms[col]) >= KEYPRESS_TIME))) {
+ code = MATRIX_SCAN_CODE(row, col, kp->row_shift);
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, kp->keymap[code], 1);
+ input_report_key(input, kp->keymap[code], 0);
+ kp->last_key_state[col] = new_state[col];
+ if (kp->last_col != col)
+ kp->last_key_state[kp->last_col] = 0;
+ kp->last_key_ms[col] = this_ms;
+ }
+ temp = temp >> 1;
+ }
+ }
+ input_sync(input);
+
+ smsc_write(kp->dev, SMSC_KP_INT_MASK, 0xFF);
+
+ /* Set up Low Power Mode (Wake-up) (0xFB) */
+ smsc_write(kp->dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR);
+
+ /*Enable Keypad Scan (generate interrupt on key press) (0x40)*/
+ smsc_write(kp->dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW);
+}
+
+static irqreturn_t do_kp_irq(int irq, void *_kp)
+{
+ struct smsc_keypad *kp = _kp;
+ int int_status;
+
+ smsc_read(kp->dev, SMSC_KP_INT_STAT, &int_status);
+ if (int_status)
+ smsc_kp_scan(kp);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_OF
+static int __devinit smsc_keypad_parse_dt(struct device *dev,
+ struct smsc_keypad *kp)
+{
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "missing DT data");
+ return -EINVAL;
+ }
+
+ of_property_read_u32(np, "keypad,num-rows", &kp->rows);
+ of_property_read_u32(np, "keypad,num-columns", &kp->cols);
+ if (!kp->rows || !kp->cols) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_bool(np, "linux,input-no-autorepeat"))
+ kp->no_autorepeat = true;
+
+ return 0;
+}
+#else
+static inline int smsc_keypad_parse_dt(struct device *dev,
+ struct smsc_keypad *kp)
+{
+ return -ENOSYS;
+}
+#endif
+
+static int __devinit
+smsc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct smsc *smsc = dev_get_drvdata(pdev->dev.parent);
+ struct input_dev *input;
+ struct smsc_keypad *kp;
+ int ret = 0;
+ int i, max_keys, row_shift;
+ int irq;
+ int addr;
+
+ kp = devm_kzalloc(dev, sizeof(*kp), GFP_KERNEL);
+
+ input = input_allocate_device();
+ if (!kp || !input) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ ret = smsc_keypad_parse_dt(&pdev->dev, kp);
+ if (ret)
+ goto err1;
+
+ /* Get the debug Device */
+ kp->input = input;
+ kp->smsc = smsc;
+ kp->irq = platform_get_irq(pdev, 0);
+ kp->dev = dev;
+
+ /* setup input device */
+ __set_bit(EV_KEY, input->evbit);
+
+ /* Enable auto repeat feature of Linux input subsystem */
+ if (!kp->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+ input->name = "SMSC Keypad";
+ input->phys = "smsc_keypad/input0";
+ input->dev.parent = &pdev->dev;
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0003;
+
+ /* Mask all GPIO interrupts (0x37-0x3B) */
+ for (addr = SMSC_GPIO_INT_MASK_START;
+ addr < SMSC_GPIO_INT_MASK_START + 4; addr++)
+ smsc_write(dev, addr, 0);
+
+ /* Set all outputs high (0x05-0x09) */
+ for (addr = SMSC_GPIO_DATA_OUT_START;
+ addr < SMSC_GPIO_DATA_OUT_START + 4; addr++)
+ smsc_write(dev, addr, 0xff);
+
+ /* Clear all GPIO interrupts (0x32-0x36) */
+ for (addr = SMSC_GPIO_INT_STAT_START;
+ addr < SMSC_GPIO_INT_STAT_START + 4; addr++)
+ smsc_write(dev, addr, 0xff);
+
+ /* Configure the smsc pins as Keyboard scan Input */
+ for (i = 0; i <= kp->rows; i++) {
+ addr = 0x12 + i;
+ smsc_write(dev, addr, SMSC_KP_KSI);
+ }
+
+ /* Configure the smsc pins as Keyboard scan output */
+ for (i = 0; i <= kp->cols; i++) {
+ addr = 0x1A + i;
+ smsc_write(dev, addr, SMSC_KP_KSO);
+ }
+
+ smsc_write(dev, SMSC_KP_INT_STAT, SMSC_KP_SET_HIGH);
+ smsc_write(dev, SMSC_WKUP_CTRL, SMSC_KP_SET_LOW_PWR);
+ smsc_write(dev, SMSC_KP_OUT, SMSC_KSO_ALL_LOW);
+
+ row_shift = get_count_order(kp->cols);
+ max_keys = kp->rows << row_shift;
+
+ kp->row_shift = row_shift;
+ kp->keymap = devm_kzalloc(dev, max_keys * sizeof(kp->keymap[0]),
+ GFP_KERNEL);
+ if (!kp->keymap) {
+ dev_err(&pdev->dev, "Not enough memory for keymap\n");
+ ret = -ENOMEM;
+ }
+
+ ret = matrix_keypad_build_keymap(NULL, NULL, kp->rows,
+ kp->cols, kp->keymap, input);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto err1;
+ }
+
+ /*
+ * This ISR will always execute in kernel thread context because of
+ * the need to access the SMSC over the I2C bus.
+ */
+ ret = devm_request_threaded_irq(dev, kp->irq, NULL, do_kp_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT, pdev->name, kp);
+ if (ret) {
+ dev_dbg(&pdev->dev, "request_irq failed for irq no=%d\n",
+ irq);
+ goto err1;
+ }
+
+ /* Enable smsc keypad interrupts */
+ ret = smsc_write(dev, SMSC_KP_INT_MASK, 0xff);
+ if (ret < 0)
+ goto err2;
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(kp->dev,
+ "Unable to register twl4030 keypad device\n");
+ goto err2;
+ }
+
+ return 0;
+
+err2:
+ free_irq(kp->irq, kp);
+err1:
+ input_free_device(input);
+ return ret;
+}
+
+static int __devexit smsc_remove(struct platform_device *pdev)
+{
+ struct smsc_keypad *kp = platform_get_drvdata(pdev);
+ input_unregister_device(kp->input);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id smsc_keypad_dt_match[] = {
+ { .compatible = "smsc,keypad" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, smsc_keypad_dt_match);
+#endif
+
+static struct platform_driver smsc_driver = {
+ .driver = {
+ .name = "smsc-keypad",
+ .of_match_table = of_match_ptr(smsc_keypad_dt_match),
+ .owner = THIS_MODULE,
+ },
+ .probe = smsc_probe,
+ .remove = __devexit_p(smsc_remove),
+};
+
+module_platform_driver(smsc_driver);
+
+MODULE_AUTHOR("G Kondaiah Manjunath <manjugk@xxxxxx>");
+MODULE_DESCRIPTION("SMSC ECE1099 Keypad driver");
+MODULE_LICENSE("GPL v2");
