To implement a custom filter in the board platform code,
the struct ads7864 might be needed. This patch moves the struct
to the global include file of the driver.
Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
drivers/input/touchscreen/ads7846.c | 55 -----------------------------------
include/linux/spi/ads7846.h | 55 +++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+), 55 deletions(-)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index f02028e..22e0b4d 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -90,61 +90,6 @@ struct ads7846_packet {
u8 read_x_cmd[3], read_y_cmd[3], pwrdown_cmd[3];
};
-struct ads7846 {
- struct input_dev *input;
- char phys[32];
- char name[32];
-
- struct spi_device *spi;
- struct regulator *reg;
-
-#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
- struct attribute_group *attr_group;
- struct device *hwmon;
-#endif
-
- u16 model;
- u16 vref_mv;
- u16 vref_delay_usecs;
- u16 x_plate_ohms;
- u16 pressure_max;
-
- bool swap_xy;
- bool use_internal;
-
- struct ads7846_packet *packet;
-
- struct spi_transfer xfer[18];
- struct spi_message msg[5];
- int msg_count;
- wait_queue_head_t wait;
-
- bool pendown;
-
- int read_cnt;
- int read_rep;
- int last_read;
-
- u16 debounce_max;
- u16 debounce_tol;
- u16 debounce_rep;
-
- u16 penirq_recheck_delay_usecs;
-
- struct mutex lock;
- bool stopped; /* P: lock */
- bool disabled; /* P: lock */
- bool suspended; /* P: lock */
-
- int (*filter)(void *data, int data_idx, int *val);
- void *filter_data;
- void (*filter_cleanup)(void *data);
- int (*get_pendown_state)(void);
- int gpio_pendown;
-
- void (*wait_for_sync)(void);
-};
-
/* leave chip selected when we're done, for quicker re-select? */
#if 0
#define CS_CHANGE(xfer) ((xfer).cs_change = 1)
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index c64de9d..96ca327 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -58,3 +58,58 @@ struct ads7846_platform_data {
unsigned long irq_flags;
};
+struct ads7846 {
+ struct input_dev *input;
+ char phys[32];
+ char name[32];
+
+ struct spi_device *spi;
+ struct regulator *reg;
+
+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
+ struct attribute_group *attr_group;
+ struct device *hwmon;
+#endif
+
+ u16 model;
+ u16 vref_mv;
+ u16 vref_delay_usecs;
+ u16 x_plate_ohms;
+ u16 pressure_max;
+
+ bool swap_xy;
+ bool use_internal;
+
+ struct ads7846_packet *packet;
+
+ struct spi_transfer xfer[18];
+ struct spi_message msg[5];
+ int msg_count;
+ wait_queue_head_t wait;
+
+ bool pendown;
+
+ int read_cnt;
+ int read_rep;
+ int last_read;
+
+ u16 debounce_max;
+ u16 debounce_tol;
+ u16 debounce_rep;
+
+ u16 penirq_recheck_delay_usecs;
+
+ struct mutex lock;
+ bool stopped; /* P: lock */
+ bool disabled; /* P: lock */
+ bool suspended; /* P: lock */
+
+ int (*filter)(void *data, int data_idx, int *val);
+ void *filter_data;
+ void (*filter_cleanup)(void *data);
+ int (*get_pendown_state)(void);
+ int gpio_pendown;
+
+ void (*wait_for_sync)(void);
+};
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
