Re: [PATCH v3] input: qt1070: Add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry,

On 9/11/2012 18:14, Bo Shen wrote:
Add qt1070 device tree support
Using device node to parse irq

Test this on at91sam9x5ek board

Signed-off-by: Bo Shen <voice.shen@xxxxxxxxx>
---
change since v2
   Using device node to parse irq,
   Remove gpio relative stuff

change since v1
   Add gpio relative stuff, gpio_is_valid, gpio_request
---
  .../devicetree/bindings/input/atmel-qt1070.txt     |   16 ++++++++++++++++
  drivers/input/keyboard/qt1070.c                    |    9 +++++++++
  2 files changed, 25 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/input/atmel-qt1070.txt


Ping?

diff --git a/Documentation/devicetree/bindings/input/atmel-qt1070.txt b/Documentation/devicetree/bindings/input/atmel-qt1070.txt
new file mode 100644
index 0000000..e1fc09e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel-qt1070.txt
@@ -0,0 +1,16 @@
+Atmel qt1070 keyboard interface
+
+Required Properties:
+- compatible: Should be "atmel,qt1070"
+- reg: I2C slave address
+- interrupt-parent: Depends on SoC
+- interrupts: The interrupt pin number to the cpu, and trigger mode.
+
+Example:
+
+	qt1070@1b {
+		compatible = "atmel,qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+	};
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index ca68f29..60457dc 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -249,10 +249,19 @@ static const struct i2c_device_id qt1070_id[] = {
  };
  MODULE_DEVICE_TABLE(i2c, qt1070_id);

+#ifdef CONFIG_OF
+static struct of_device_id atmel_qt1070_of_match[] = {
+	{ .compatible = "atmel,qt1070" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, atmel_qt1070_of_match);
+#endif
+
  static struct i2c_driver qt1070_driver = {
  	.driver	= {
  		.name	= "qt1070",
  		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(atmel_qt1070_of_match),
  	},
  	.id_table	= qt1070_id,
  	.probe		= qt1070_probe,


--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux