On 09/08/2012 08:51 AM, dturvene wrote:
On 08/17/2012 01:04 PM, Ben Gamari wrote:
dturvene <dturvene@xxxxxxxxxxxx> writes:
Ben -
I tried your fix on a Dell Inspiron 15R N5110 (I15R). It did not work.
Things I noticed:
1) Consistent with prior observations, the touchpad E7 signature for it
is: 0x73 0x03 0x50, different than yours on the E6230.
Alright. Good to know.
2) Your alps_hw_init_v5 sequence does not work for my I15R. I noticed
that the sequence enters/exits command mode a couple times. Why not
enter once, do the init and then exit?
Frankly, I didn't put much (honestly, any) time into figuring out the
meaning behind command sequence. I grabbed a dump from the VM and
implemented exactly what the Windows driver did. At that point I was
under the impression I was dealing with an entirely new protocol so it
didn't make much sense to put time into reasoning out the command
structure. Given the v3 report format is used I should revisit
this. I'll hopefully have a chance to do this this weekend. Given you
seem to recognize the command structure, you could probably do this even
faster than me. Take a stab at it if you feel so inclined. Pull requests
accepted.
3) When in command mode, the I15R accurately sets and retrieves
registers (e.g. 0x0008 returns 0x00 0x08 0x02). When not in command
mode, all register reads return -1. Oddly, the check in
alps_enter_command_mode is 0x73 0x01 rather than 0x88 0x07.
So I think either I'm doing something wrong or I'm dealing with YAAP
(Yet Another ALPS Protocol).
Hopefully not.
My question: how did you get the protocol trace? I think you said
previously that the drive does some direct register I/O. I couldn't
see
anything beyond PS/2 commands running under Virtual Box.
I used Seth Foreshee's method[1] under Qemu. Note that the Alps driver
for the E6230 (and, given the behavior you see, likely your machine as
well) checks for the presence of an entry in the ACPI DSDT (if not
present, the driver falls back onto generic PS/2 behavior).
Consequently, you may need to do some editing of the Qemu DSDT as
pointed out earlier in this thread by James (Message-Id:
<20120814103553.GF23370@arianrhod.panaceas.james.local>) I'm not
terribly familiar with ACPI, I'll defer to him to explain precisely how
he determined the relevant sections.
Cheers,
- Ben
[1]
http://swapspace.forshee.me/2011/11/touchpad-protocol-reverse-engineering.html
Hi Ben, etc. -
I just got back to looking at the Alps driver on a Dell IR15 N5110. I
was using Virtualbox but switched to Qemu (1.1.1) based on your
progress, patched the ps2.c and acpi-dsdt.dsl (making sure to build
the hex file included in acpi.c .) I'm running vista as the guest
OS, which normally loads a generic ps/2 driver. The Alps touchpad
works and ps2 events are being logged. When I try to install the Alps
driver, it fails because (I guess) qemu has a preconfigured notion of
what hardware is running. I'm trying to figure out how to configure
qemu to detect the real ALPS touchpad.
I welcome from the community and you any ideas for qemu to detect the
alps touchpad.
Dave
I finally got this working. Briefly, it's a new protocol to init the
device and the 6-byte packets coming from it are a new format. I didn't
spend much time trying to understand the init sequence, just stuck the
qemu packet dump into a new (V6) init function. But it works; probably
needs to be tightened up a little. I don't understand the thought
process behind the different protocols. It seems like the NRE to keep
writing test and production drivers would be unsustainable.
I created a psmouse DLKM with a README at [1]. If there's anybody else
with an N5110 who wants to try it out please post your comments.
[1]: http://www.dahetral.com/public-download
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
