Hi all,
(This is a move upstream for a bug reported on Ubuntu's Launchpad
tracker (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/755518),
please bear with me.)
A laptop sold with Ubuntu linux in 2010 has an misdetected touchpad.
We're told by the manufacturer that it's a Synaptics controller, and the
Synaptics driver supplied by them for Windows is dated 08/27/2009. The
problem persists with a range of kernel versions, up to and including a
recent 'rc5' 'mainline' kernel built by ubuntu.
I tried to install Windows to a virtual machine with the aim of
investigating with the Synaptics driver, but failed to complete the
installation. I'm willing to try modules or patches. There are 6 other
Launchpad users with the same problem, hopefully we can help you to help us.
Thanks
Ed
Here's the problem info in the format advised by Ubuntu (which makes
this a long email, but hopefully useful):
[1.] One line summary of the problem:
Synaptics Touchpad incorrectly detected as PS/2 mouse on clausoft MNW737
(aka meenee, aka PX1)
[2.] Full description of the problem/report:
There's no touchpad tab in the system/prefs/mouse control panel.
gconf-editor has a button to disable tap-to-click but it has no effect. Xorg
log does not mention synaptics. /proc/bus/input/devices does not mention
synaptics. The tpconfig tool is unable to adjust zthreshold or disable tap
to click. tpconfig reports this:
# tpconfig -D1 -z0
Probing mouse port [/dev/psaux].
Grabbing mouse port [/dev/psaux].
Trying Synaptics detection.
[query 00 => 0x60 0x3 0xc8]
Found Synaptics Touchpad.
[query 0x3 => 0x60 0x3 0xc8]
Firmware: 8.96 (multiple-byte mode).
Z threshold set as "0".
[query 0x1 => 0x60 0x3 0xc8]
[query 0x1 => 0x60 0x3 0xc8]
Z threshold: 6 of 7.
Strictly, the touchpad is detected as "ImPS/2 Generic Wheel Mouse" according
to /proc/bus/input/devices
I've reported this as linux (kernel) problem according to advice on
https://wiki.ubuntu.com/DebuggingTouchpadDetection
>From that page there's just one similar open known bug, which relates to
ALPS hardware (so is different)
As evidence that this is synaptics hardware the vendor provides a windows
driver with this identifying info
DriverVer=08/27/2009, 14.0.3.0
DriverMfgr="Synaptics"
This netbook is sold as 'meenee'
ApportVersion: 2.4-0ubuntu5
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: ubuntu 3286 F.... pulseaudio
CasperVersion: 1.320
DistroRelease: Ubuntu 12.10
LiveMediaBuild: Ubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120724.2)
MachineType: THD(Thread technology) PX1
Package: linux (not installed)
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: initrd=/ubninit file=/cdrom/preseed/username.seed
boot=casper quiet splash -- BOOT_IMAGE=/ubnkern
ProcVersionSignature: Ubuntu 3.5.0-6.6-generic 3.5.0
RelatedPackageVersions:
linux-restricted-modules-3.5.0-6-generic N/A
linux-backports-modules-3.5.0-6-generic N/A
linux-firmware 1.85
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Tags: quantal running-unity
Uname: Linux 3.5.0-6-generic i686
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
dmi.bios.date: 10/08/2010
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 080016
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: PX1
dmi.board.vendor: THD(Thread technology)
dmi.board.version: 01
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr080016:bd10/08/2010:svnTHD(Threadtechnology):pnPX1:pvr01:rvnTHD(Threadtechnology):rnPX1:rvr01:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: PX1
dmi.product.version: 01
dmi.sys.vendor: THD(Thread technology)
[3.] Keywords (i.e., modules, networking, kernel):
input, linux-input, kernel, psmouse
Tags: natty oneiric quantal apport-bug apport-collected bot-stop-nagging
i386 kernel-bug-exists-upstream kernel-bug-exists-upstream-v3.6-rc3-quantal
maverick running-unity ubuntu-une Edit Tag help
[4.] Kernel version (from /proc/version):
Linux version 3.6.0-030600rc5-generic (apw@gomeisa) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201209082035 SMP Sun Sep 9 00:42:37 UTC
2012
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
Not applicable
[6.] A small shell script or example program which triggers the problem (if
possible)
This does not trigger the problem, but may help to indicate what the
hardware detection is doing:
OLD=/tmp/psmouse_debug1
NEW=/tmp/psmouse_debug2
sudo rmmod psmouse
dmesg > $OLD
echo 1 | sudo tee -a /sys/module/i8042/parameters/debug
sudo modprobe -v psmouse
echo 0 | sudo tee -a /sys/module/i8042/parameters/debug
dmesg > $NEW
diff $OLD $NEW
which in my case (running 3.6.0-030600rc5-generic) gives:
> [ 1105.917456] i8042: [276198] d4 -> i8042 (command)
> [ 1105.917885] i8042: [276198] f2 -> i8042 (parameter)
> [ 1105.931264] i8042: [276201] fa <- i8042 (interrupt, 1, 12)
> [ 1105.931524] i8042: [276201] 03 <- i8042 (interrupt, 1, 12)
> [ 1105.931560] i8042: [276201] d4 -> i8042 (command)
> [ 1105.931985] i8042: [276201] f6 -> i8042 (parameter)
and in the case of Leo Iannacone (l3on) running 3.5.0-14-generic
(quantal)gives:
> [ 9916.288344] i8042: [2478934] 90 -> i8042 (command)
> [ 9916.288614] i8042: [2478934] f2 -> i8042 (parameter)
> [ 9916.289262] i8042: [2478934] MUX error, status is 35, data is fe
> [ 9916.289274] i8042: [2478934] fe <- i8042 (interrupt, 2, 12, timeout)
> [ 9916.289352] i8042: [2478934] 91 -> i8042 (command)
> [ 9916.289566] i8042: [2478934] f2 -> i8042 (parameter)
> [ 9916.300835] i8042: [2478937] fa <- i8042 (interrupt, 3, 12)
> [ 9916.302350] i8042: [2478937] 03 <- i8042 (interrupt, 3, 12)
> [ 9916.302411] i8042: [2478937] 91 -> i8042 (command)
> [ 9916.302628] i8042: [2478937] f6 -> i8042 (parameter)
[7.] Environment
lsb_release -rd
Description: Ubuntu quantal (development branch)
Release: 12.10
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux meeneePX1 3.6.0-030600rc5-generic #201209082035 SMP Sun Sep 9 00:42:37
UTC 2012 i686 i686 i686 GNU/Linux
Gnu C 4.7
Gnu make 3.81
binutils 2.22.52.20120713
util-linux 2.20.1
mount support
module-init-tools 3.16
e2fsprogs 1.42.4
pcmciautils 018
PPP 2.4.5
Linux C Library 2.15
Dynamic linker (ldd) 2.15
Procps 3.3.3
Net-tools 1.60
Kbd 1.15.3
Sh-utils 8.13
wireless-tools 30
Modules Loaded microcode psmouse serio_raw parport_pc ppdev video lp
parport usb_storage
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N455 @ 1.66GHz
stepping : 10
microcode : 0x107
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc
arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3
cx16 xtpr pdcm movbe lahf_lm dtherm
bogomips : 3325.19
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N455 @ 1.66GHz
stepping : 10
microcode : 0x107
cpu MHz : 1000.000
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 0
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc
arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3
cx16 xtpr pdcm movbe lahf_lm dtherm
bogomips : 3325.19
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 48 bits virtual
power management:
[7.3.] Module information (from /proc/modules):
microcode 18406 0 - Live 0x00000000
psmouse 77485 0 - Live 0x00000000
serio_raw 13031 0 - Live 0x00000000
parport_pc 32114 0 - Live 0x00000000
ppdev 12849 0 - Live 0x00000000
video 18908 0 - Live 0x00000000
lp 17455 0 - Live 0x00000000
parport 40930 3 parport_pc,ppdev,lp, Live 0x00000000
usb_storage 39719 0 - Live 0x00000000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
Execute the following in a terminal, and paste the results:
cat /proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.2
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.2
01f0-01f7 : ata_piix
0376-0376 : 0000:00:1f.2
0376-0376 : ata_piix
03c0-03df : vga+
03f6-03f6 : 0000:00:1f.2
03f6-03f6 : ata_piix
0400-041f : 0000:00:1f.3
0480-04bf : pnp 00:08
04d0-04d1 : pnp 00:08
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
1000-107f : pnp 00:08
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1010-1015 : ACPI CPU throttle
1020-1020 : ACPI PM2_CNT_BLK
1028-102f : ACPI GPE0_BLK
2000-2fff : PCI Bus 0000:02
d400-d41f : 0000:00:1d.3
d400-d41f : uhci_hcd
d480-d49f : 0000:00:1d.2
d480-d49f : uhci_hcd
d800-d81f : 0000:00:1d.1
d800-d81f : uhci_hcd
d880-d89f : 0000:00:1d.0
d880-d89f : uhci_hcd
dc00-dc07 : 0000:00:02.0
e000-efff : PCI Bus 0000:01
e800-e8ff : 0000:01:00.0
ff90-ff9f : 0000:00:1f.2
ff90-ff9f : ata_piix
cat /proc/iomem
00000000-0000ffff : reserved
00010000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000dffff : PCI Bus 0000:00
000e0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-7f58ffff : System RAM
01000000-015eb320 : Kernel code
015eb321-018db6bf : Kernel data
019a0000-01a78fff : Kernel bss
7f590000-7f59dfff : ACPI Tables
7f59e000-7f5cffff : ACPI Non-volatile Storage
7f5d0000-7f5dffff : reserved
7f5e0000-7f5e7fff : RAM buffer
7f5e8000-dfffffff : reserved
7f700000-dfffffff : PCI Bus 0000:00
80000000-801fffff : PCI Bus 0000:02
80200000-802003ff : 0000:00:1f.2
80201000-80201fff : Intel Flush Page
d0000000-dfffffff : 0000:00:02.0
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
e0000000-efffffff : pnp 00:0d
f0000000-fed8ffff : PCI Bus 0000:00
fdf00000-fdffffff : PCI Bus 0000:01
fdfef000-fdfeffff : 0000:01:00.0
fdff0000-fdffffff : 0000:01:00.0
fe780000-fe7fffff : 0000:00:02.1
fe877c00-fe877fff : 0000:00:1d.7
fe877c00-fe877fff : ehci_hcd
fe878000-fe87bfff : 0000:00:1b.0
fe880000-fe8fffff : 0000:00:02.0
fe900000-fe9fffff : 0000:00:02.0
fea00000-feafffff : PCI Bus 0000:01
feae0000-feafffff : 0000:01:00.0
feb00000-febfffff : PCI Bus 0000:02
febf0000-febfffff : 0000:02:00.0
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:08
fed20000-fed8ffff : pnp 00:08
fed90000-fed93fff : pnp 00:01
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
fee00000-fee00fff : pnp 00:0c
ffb00000-ffffffff : reserved
ffc00000-ffefffff : pnp 00:0b
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx
DMI Bridge
Subsystem: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI
Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=08 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx
Integrated Graphics Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe880000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Subsystem: Intel Corporation Device a011
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe780000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller (rev 02)
Subsystem: Device 1991:5634
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe878000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #32, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+
HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Device 1991:1001
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #33, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+
HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41a1
Capabilities: [90] Subsystem: Device 1991:1001
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Device 1991:1002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Device 1991:1002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Device 1991:1002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Device 1991:1002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Allied Telesis, Inc Device 1002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe877c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Device 1991:1001
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
Subsystem: Device 1991:1001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller
[IDE mode] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Device 1991:1001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff90 [size=16]
Region 5: Memory at 80200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
Subsystem: Device 1991:1001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI
Express Fast Ethernet controller
Physical Slot: 32
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfef000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 01-00-00-00-00-00-00-00
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-NB037H 802.11bgn Wireless Half-size Mini
PCIe Card [AR9002WB-1NGCD]
Physical Slot: 33
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
PME(D0+,D1+,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
Capabilities: [170 v1] Power Budgeting <?>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: CSD T55SX320 Rev: FH11
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: USB2.0 Model: CardReader COMBO Rev: 0100
Type: Direct-Access ANSI SCSI revision: 00
[7.7.] Other information that might be relevant to the problem (please look
in /proc and include all information that you think to be relevant):
Execute the following via a terminal, and paste the results:
ls /proc
1 1410 1616 1728 2049 3 70 fb pagetypeinfo
10 1413 1617 1749 2050 30 71 filesystems partitions
1009 1414 1618 1762 2060 31 735 fs sched_debug
1017 1417 1619 1764 2064 314 783 interrupts schedstat
1035 1421 1621 1767 2065 32 8 iomem scsi
1036 1424 1636 1769 2093 327 9 ioports self
1039 1437 1640 1771 21 33 920 irq slabinfo
1058 1440 1651 18 210 42 942 kallsyms softirqs
1063 1448 1656 1805 22 45 971 kcore stat
1068 15 1666 1812 223 46 975 key-users swaps
1069 1509 1668 1814 224 466 acpi kmsg sys
1071 1520 1670 1819 225 469 buddyinfo kpagecount sysrq-trigger
11 1584 1675 183 226 47 bus kpageflags sysvipc
12 1586 1680 184 23 471 cgroups latency_stats timer_list
1213 1590 1684 1840 2309 48 cmdline loadavg timer_stats
1238 1595 1686 1853 24 5 consoles locks tty
1258 16 1688 1859 2421 512 cpuinfo mdstat uptime
1265 1605 1690 1865 244 513 crypto meminfo version
1268 1607 1692 1870 25 534 devices misc vmallocinfo
1292 1610 1694 19 26 595 diskstats modules vmstat
13 1612 1696 1953 27 68 dma mounts zoneinfo
1367 1613 17 2 28 69 driver mtrr
14 1614 1726 20 29 7 execdomains net
[X.] Other notes, patches, fixes, workarounds:
Seth Forshee has helped with similar difficulties which turn out to be
laptops with ALPS touchpads. This does not seem to be a problem with an ALPS
touchpad. He recommended a line of investigation which involved installing
Windows and the manufacturer-supplied driver, but I was unable to get the
installation to complete on a VM.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
