Driver for Synaptics touchscreens using RMI4 protocol.
Signed-off-by: Christopher Heiny <cheiny@xxxxxxxxxxxxx>
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@xxxxxxxxxxxxxx>
Cc: Joeri de Gram <j.de.gram@xxxxxxxxx>
Acked-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
drivers/input/rmi4/rmi_dev.c | 448 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 448 insertions(+), 0 deletions(-)
diff --git a/drivers/input/rmi4/rmi_dev.c b/drivers/input/rmi4/rmi_dev.c
new file mode 100644
index 0000000..080db55
--- /dev/null
+++ b/drivers/input/rmi4/rmi_dev.c
@@ -0,0 +1,448 @@
+/*
+ * Copyright (c) 2011 Synaptics Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/syscalls.h>
+
+#include <linux/rmi.h>
+#include "rmi_driver.h"
+
+#define CHAR_DEVICE_NAME "rmi"
+#define DEVICE_CLASS_NAME "rmidev"
+
+#define RMI_CHAR_DEV_TMPBUF_SZ 128
+#define RMI_REG_ADDR_PAGE_SELECT 0xFF
+#define REG_ADDR_LIMIT 0xFFFF
+
+struct rmidev_data {
+ /* mutex for file operation*/
+ struct mutex file_mutex;
+ /* main char dev structure */
+ struct cdev main_dev;
+
+ /* pointer to the corresponding RMI4 device. We use this to do */
+ /* read, write, etc. */
+ struct rmi_device *rmi_dev;
+ /* reference count */
+ int ref_count;
+
+ struct class *device_class;
+};
+
+/*store dynamically allocated major number of char device*/
+static int rmidev_major_num;
+
+
+static struct class *rmidev_device_class;
+
+
+/* file operations for RMI char device */
+
+/*
+ * rmidev_llseek: - use to setup register address
+ *
+ * @filp: file structure for seek
+ * @off: offset
+ * if whence == SEEK_SET,
+ * high 16 bits: page address
+ * low 16 bits: register address
+ *
+ * if whence == SEEK_CUR,
+ * offset from current position
+ *
+ * if whence == SEEK_END,
+ * offset from END(0xFFFF)
+ *
+ * @whence: SEEK_SET , SEEK_CUR or SEEK_END
+ */
+static loff_t rmidev_llseek(struct file *filp, loff_t off, int whence)
+{
+ loff_t newpos;
+ struct rmidev_data *data = filp->private_data;
+
+ if (IS_ERR(data)) {
+ pr_err("%s: pointer of char device is invalid", __func__);
+ return -EBADF;
+ }
+
+ mutex_lock(&(data->file_mutex));
+
+ switch (whence) {
+ case SEEK_SET:
+ newpos = off;
+ break;
+
+ case SEEK_CUR:
+ newpos = filp->f_pos + off;
+ break;
+
+ case SEEK_END:
+ newpos = REG_ADDR_LIMIT + off;
+ break;
+
+ default: /* can't happen */
+ newpos = -EINVAL;
+ goto clean_up;
+ }
+
+ if (newpos < 0 || newpos > REG_ADDR_LIMIT) {
+ dev_err(&data->rmi_dev->dev, "newpos 0x%04x is invalid.\n",
+ (unsigned int)newpos);
+ newpos = -EINVAL;
+ goto clean_up;
+ }
+
+ filp->f_pos = newpos;
+
+clean_up:
+ mutex_unlock(&(data->file_mutex));
+ return newpos;
+}
+
+/*
+ * rmidev_read: - use to read data from RMI stream
+ *
+ * @filp: file structure for read
+ * @buf: user-level buffer pointer
+ *
+ * @count: number of byte read
+ * @f_pos: offset (starting register address)
+ *
+ * @return number of bytes read into user buffer (buf) if succeeds
+ * negative number if error occurs.
+ */
+static ssize_t rmidev_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct rmidev_data *data = filp->private_data;
+ ssize_t retval = 0;
+ unsigned char tmpbuf[count+1];
+
+ /* limit offset to REG_ADDR_LIMIT-1 */
+ if (count > (REG_ADDR_LIMIT - *f_pos))
+ count = REG_ADDR_LIMIT - *f_pos;
+
+ if (count == 0)
+ return 0;
+
+ if (IS_ERR(data)) {
+ pr_err("%s: pointer of char device is invalid", __func__);
+ return -EBADF;
+ }
+
+ mutex_lock(&(data->file_mutex));
+
+ retval = rmi_read_block(data->rmi_dev, *f_pos, tmpbuf, count);
+
+ if (retval < 0)
+ goto clean_up;
+
+ if (copy_to_user(buf, tmpbuf, count))
+ retval = -EFAULT;
+ else
+ *f_pos += retval;
+
+clean_up:
+
+ mutex_unlock(&(data->file_mutex));
+
+ return retval;
+}
+
+/*
+ * rmidev_write: - use to write data into RMI stream
+ *
+ * @filep : file structure for write
+ * @buf: user-level buffer pointer contains data to be written
+ * @count: number of byte be be written
+ * @f_pos: offset (starting register address)
+ *
+ * @return number of bytes written from user buffer (buf) if succeeds
+ * negative number if error occurs.
+ */
+static ssize_t rmidev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct rmidev_data *data = filp->private_data;
+ ssize_t retval = 0;
+ unsigned char tmpbuf[count+1];
+
+ /* limit offset to REG_ADDR_LIMIT-1 */
+ if (count > (REG_ADDR_LIMIT - *f_pos))
+ count = REG_ADDR_LIMIT - *f_pos;
+
+ if (count == 0)
+ return 0;
+
+ if (IS_ERR(data)) {
+ pr_err("%s: pointer of char device is invalid", __func__);
+ return -EBADF;
+ }
+
+ if (copy_from_user(tmpbuf, buf, count))
+ return -EFAULT;
+
+ mutex_lock(&(data->file_mutex));
+
+ retval = rmi_write_block(data->rmi_dev, *f_pos, tmpbuf, count);
+
+ if (retval >= 0)
+ *f_pos += count;
+
+ mutex_unlock(&(data->file_mutex));
+
+ return retval;
+}
+
+/*
+ * rmidev_open: - get a new handle for from RMI stream
+ * @inp : inode struture
+ * @filp: file structure for read/write
+ *
+ * @return 0 if succeeds
+ */
+static int rmidev_open(struct inode *inp, struct file *filp)
+{
+ struct rmidev_data *data = container_of(inp->i_cdev,
+ struct rmidev_data, main_dev);
+ int retval = 0;
+
+ filp->private_data = data;
+
+ if (!data->rmi_dev)
+ return -EACCES;
+
+ mutex_lock(&(data->file_mutex));
+ if (data->ref_count < 1)
+ data->ref_count++;
+ else
+ retval = -EACCES;
+
+ mutex_unlock(&(data->file_mutex));
+
+ return retval;
+}
+
+/*
+ * rmidev_release: - release an existing handle
+ * @inp: inode structure
+ * @filp: file structure for read/write
+ *
+ * @return 0 if succeeds
+ */
+static int rmidev_release(struct inode *inp, struct file *filp)
+{
+ struct rmidev_data *data = container_of(inp->i_cdev,
+ struct rmidev_data, main_dev);
+
+ if (!data->rmi_dev)
+ return -EACCES;
+
+ mutex_lock(&(data->file_mutex));
+
+ data->ref_count--;
+ if (data->ref_count < 0)
+ data->ref_count = 0;
+
+ mutex_unlock(&(data->file_mutex));
+
+ return 0;
+}
+
+static const struct file_operations rmidev_fops = {
+ .owner = THIS_MODULE,
+ .llseek = rmidev_llseek,
+ .read = rmidev_read,
+ .write = rmidev_write,
+ .open = rmidev_open,
+ .release = rmidev_release,
+};
+
+/*
+ * rmidev_device_cleanup - release memory or unregister driver
+ * @rmidev_data: instance data for a particular device.
+ *
+ */
+static void rmidev_device_cleanup(struct rmidev_data *data)
+{
+ dev_t devno;
+
+ /* Get rid of our char dev entries */
+ if (data) {
+ devno = data->main_dev.dev;
+
+ if (data->device_class)
+ device_destroy(data->device_class, devno);
+
+ cdev_del(&data->main_dev);
+ kfree(data);
+
+ /* cleanup_module is never called if registering failed */
+ unregister_chrdev_region(devno, 1);
+ pr_debug("%s: rmidev device is removed\n", __func__);
+ }
+}
+
+/*
+ * rmi_char_devnode - return device permission
+ *
+ * @dev: char device structure
+ * @mode: file permission
+ *
+ */
+static char *rmi_char_devnode(struct device *dev, mode_t *mode)
+{
+ if (!mode)
+ return NULL;
+ /**mode = 0666*/
+ *mode = (S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH|S_IWOTH);
+
+ return kasprintf(GFP_KERNEL, "rmi/%s", dev_name(dev));
+}
+
+static int rmidev_init_device(struct rmi_char_device *cd)
+{
+ struct rmi_device *rmi_dev = cd->rmi_dev;
+ struct rmidev_data *data;
+ dev_t dev_no;
+ int retval;
+ struct device *device_ptr;
+
+ if (rmidev_major_num) {
+ dev_no = MKDEV(rmidev_major_num, cd->rmi_dev->number);
+ retval = register_chrdev_region(dev_no, 1, CHAR_DEVICE_NAME);
+ } else {
+ retval = alloc_chrdev_region(&dev_no, 0, 1, CHAR_DEVICE_NAME);
+ /* let kernel allocate a major for us */
+ rmidev_major_num = MAJOR(dev_no);
+ dev_info(&rmi_dev->dev, "Major number of rmidev: %d\n",
+ rmidev_major_num);
+ }
+ if (retval < 0) {
+ dev_err(&rmi_dev->dev,
+ "Failed to get minor dev number %d, code %d.\n",
+ cd->rmi_dev->number, retval);
+ return retval;
+ } else
+ dev_info(&rmi_dev->dev, "Allocated rmidev %d %d.\n",
+ MAJOR(dev_no), MINOR(dev_no));
+
+ data = kzalloc(sizeof(struct rmidev_data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&rmi_dev->dev, "Failed to allocate rmidev_data.\n");
+ /* unregister the char device region */
+ __unregister_chrdev(rmidev_major_num, MINOR(dev_no), 1,
+ CHAR_DEVICE_NAME);
+ return -ENOMEM;
+ }
+
+ mutex_init(&data->file_mutex);
+
+ data->rmi_dev = cd->rmi_dev;
+ cd->data = data;
+
+ cdev_init(&data->main_dev, &rmidev_fops);
+
+ retval = cdev_add(&data->main_dev, dev_no, 1);
+ if (retval) {
+ dev_err(&cd->rmi_dev->dev, "Error %d adding rmi_char_dev.\n",
+ retval);
+ rmidev_device_cleanup(data);
+ return retval;
+ }
+
+ dev_set_name(&cd->dev, "rmidev%d", MINOR(dev_no));
+ data->device_class = rmidev_device_class;
+ device_ptr = device_create(
+ data->device_class,
+ NULL, dev_no, NULL,
+ CHAR_DEVICE_NAME"%d",
+ MINOR(dev_no));
+
+ if (IS_ERR(device_ptr)) {
+ dev_err(&cd->rmi_dev->dev, "Failed to create rmi device.\n");
+ rmidev_device_cleanup(data);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void rmidev_remove_device(struct rmi_char_device *cd)
+{
+ struct rmidev_data *data;
+
+ dev_dbg(&cd->dev, "%s: removing an rmidev device.\n", __func__);
+ if (!cd)
+ return;
+
+ data = cd->data;
+ if (data)
+ rmidev_device_cleanup(data);
+}
+
+static struct rmi_char_driver rmidev_driver = {
+ .driver = {
+ .name = "rmidev",
+ .owner = THIS_MODULE,
+ },
+
+ .init = rmidev_init_device,
+ .remove = rmidev_remove_device,
+};
+
+static int __init rmidev_init(void)
+{
+ int error = 0;
+ pr_debug("%s: rmi_dev initialization.\n", __func__);
+
+ /* create device node */
+ rmidev_device_class = class_create(THIS_MODULE, DEVICE_CLASS_NAME);
+
+ if (IS_ERR(rmidev_device_class)) {
+ pr_err("%s: ERROR - Failed to create /dev/%s.\n", __func__,
+ CHAR_DEVICE_NAME);
+ return -ENODEV;
+ }
+ /* setup permission */
+ rmidev_device_class->devnode = rmi_char_devnode;
+
+ error = rmi_register_character_driver(&rmidev_driver);
+ if (error)
+ class_destroy(rmidev_device_class);
+ return error;
+}
+
+static void __exit rmidev_exit(void)
+{
+ pr_debug("%s: exiting.\n", __func__);
+ rmi_unregister_character_driver(&rmidev_driver);
+ class_destroy(rmidev_device_class);
+}
+
+module_init(rmidev_init);
+module_exit(rmidev_exit);
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("RMI4 Char Device");
+MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
