In order to make code maintenance easier, split the vairous functions into individial files (this removes a bunch of #ifdefs). Signed-off-by: Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> --- WARNING: this is a mangled resend of this patch (removed the payload of hunk that deletes drivers/hid/hid-picolcd.c to halve the patch's size) as resulting mail is otherwise too big for vger (unless bless by list owner)... If needed, please ask for off-list resending of this patch, though dropping the first (and mangled) hunk before attempting to apply and then manually removing the file should do. drivers/hid/hid-picolcd.c | 2752 ----------------------------------- drivers/hid/Kconfig | 8 + drivers/hid/Makefile | 20 + drivers/hid/hid-picolcd.h | 306 ++++ drivers/hid/hid-picolcd_backlight.c | 121 ++ drivers/hid/hid-picolcd_cir.c | 61 + drivers/hid/hid-picolcd_core.c | 704 +++++++++ drivers/hid/hid-picolcd_debugfs.c | 898 ++++++++++++ drivers/hid/hid-picolcd_fb.c | 673 +++++++++ drivers/hid/hid-picolcd_lcd.c | 106 ++ drivers/hid/hid-picolcd_leds.c | 172 +++ 11 files changed, 3069 insertions(+), 2752 deletions(-) delete mode 100644 drivers/hid/hid-picolcd.c create mode 100644 drivers/hid/hid-picolcd.h create mode 100644 drivers/hid/hid-picolcd_backlight.c create mode 100644 drivers/hid/hid-picolcd_cir.c create mode 100644 drivers/hid/hid-picolcd_core.c create mode 100644 drivers/hid/hid-picolcd_debugfs.c create mode 100644 drivers/hid/hid-picolcd_fb.c create mode 100644 drivers/hid/hid-picolcd_lcd.c create mode 100644 drivers/hid/hid-picolcd_leds.c diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c deleted file mode 100644 index 45c3433..0000000 --- a/drivers/hid/hid-picolcd.c +++ /dev/null @@ -1,2752 +0,0 @@ <dropped as otherwise patch is too big> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 3fda8c8..1d806d0 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -491,6 +491,14 @@ config HID_PICOLCD_LEDS ---help--- Provide access to PicoLCD's GPO pins via leds class. +config HID_PICOLCD_CIR + bool "CIR via RC class" if EXPERT + default !EXPERT + depends on HID_PICOLCD + depends on HID_PICOLCD=RC_CORE || RC_CORE=y + ---help--- + Provide access to PicoLCD's CIR interface via remote control (LIRC). + config HID_PRIMAX tristate "Primax non-fully HID-compliant devices" depends on USB_HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index ca6cc9f..8b7a9b6 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -66,6 +66,26 @@ obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o +hid-picolcd-y += hid-picolcd_core.o +ifdef CONFIG_HID_PICOLCD_FB +hid-picolcd-y += hid-picolcd_fb.o +endif +ifdef CONFIG_HID_PICOLCD_BACKLIGHT +hid-picolcd-y += hid-picolcd_backlight.o +endif +ifdef CONFIG_HID_PICOLCD_LCD +hid-picolcd-y += hid-picolcd_lcd.o +endif +ifdef CONFIG_HID_PICOLCD_LEDS +hid-picolcd-y += hid-picolcd_leds.o +endif +ifdef CONFIG_HID_PICOLCD_CIR +hid-picolcd-y += hid-picolcd_cir.o +endif +ifdef CONFIG_DEBUG_FS +hid-picolcd-y += hid-picolcd_debugfs.o +endif + obj-$(CONFIG_HID_PRIMAX) += hid-primax.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \ hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \ diff --git a/drivers/hid/hid-picolcd.h b/drivers/hid/hid-picolcd.h new file mode 100644 index 0000000..4ddb318 --- /dev/null +++ b/drivers/hid/hid-picolcd.h @@ -0,0 +1,306 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#define PICOLCD_NAME "PicoLCD (graphic)" + +/* Report numbers */ +#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */ +#define ERR_SUCCESS 0x00 +#define ERR_PARAMETER_MISSING 0x01 +#define ERR_DATA_MISSING 0x02 +#define ERR_BLOCK_READ_ONLY 0x03 +#define ERR_BLOCK_NOT_ERASABLE 0x04 +#define ERR_BLOCK_TOO_BIG 0x05 +#define ERR_SECTION_OVERFLOW 0x06 +#define ERR_INVALID_CMD_LEN 0x07 +#define ERR_INVALID_DATA_LEN 0x08 +#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */ +#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */ +#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */ +#define REPORT_MEMORY 0x41 /* LCD: IN[63] */ +#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */ +#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */ +#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */ +#define REPORT_RESET 0x93 /* LCD: OUT[2] */ +#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */ +#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */ +#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */ +#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */ +#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */ +#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */ +#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */ +#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */ +#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */ +#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */ +#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */ +#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */ +#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */ +#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */ +#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */ +#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */ +#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */ + +/* Description of in-progress IO operation, used for operations + * that trigger response from device */ +struct picolcd_pending { + struct hid_report *out_report; + struct hid_report *in_report; + struct completion ready; + int raw_size; + u8 raw_data[64]; +}; + + +#define PICOLCD_KEYS 17 + +/* Per device data structure */ +struct picolcd_data { + struct hid_device *hdev; +#ifdef CONFIG_DEBUG_FS + struct dentry *debug_reset; + struct dentry *debug_eeprom; + struct dentry *debug_flash; + struct mutex mutex_flash; + int addr_sz; +#endif + u8 version[2]; + unsigned short opmode_delay; + /* input stuff */ + u8 pressed_keys[2]; + struct input_dev *input_keys; + struct input_dev *input_cir; + unsigned short keycode[PICOLCD_KEYS]; + +#ifdef CONFIG_HID_PICOLCD_FB + /* Framebuffer stuff */ + u8 fb_update_rate; + u8 fb_bpp; + u8 fb_force; + u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */ + u8 *fb_bitmap; /* framebuffer */ + struct fb_info *fb_info; + struct fb_deferred_io fb_defio; +#endif /* CONFIG_HID_PICOLCD_FB */ +#ifdef CONFIG_HID_PICOLCD_LCD + struct lcd_device *lcd; + u8 lcd_contrast; +#endif /* CONFIG_HID_PICOLCD_LCD */ +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT + struct backlight_device *backlight; + u8 lcd_brightness; + u8 lcd_power; +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ +#ifdef CONFIG_HID_PICOLCD_LEDS + /* LED stuff */ + u8 led_state; + struct led_classdev *led[8]; +#endif /* CONFIG_HID_PICOLCD_LEDS */ + + /* Housekeeping stuff */ + spinlock_t lock; + struct mutex mutex; + struct picolcd_pending *pending; + int status; +#define PICOLCD_BOOTLOADER 1 +#define PICOLCD_FAILED 2 +#define PICOLCD_READY_FB 4 +}; + + +/* Find a given report */ +#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT) +#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT) + +struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir); + +#ifdef CONFIG_DEBUG_FS +void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report); +#define usbhid_submit_report(a, b, c) \ + do { \ + picolcd_debug_out_report(hid_get_drvdata(a), a, b); \ + usbhid_submit_report(a, b, c); \ + } while (0) + +void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size); + +void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset); + +void picolcd_exit_devfs(struct picolcd_data *data); +#else +static inline void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ +} +static inline void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ +} +static inline void picolcd_exit_devfs(struct picolcd_data *data) +{ +} +static inline void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ +} +#endif /* CONFIG_DEBUG_FS */ + + +#ifdef CONFIG_HID_PICOLCD_FB +int picolcd_fb_reset(struct picolcd_data *data, int clear); + +int picolcd_init_framebuffer(struct picolcd_data *data); + +void picolcd_exit_framebuffer(struct picolcd_data *data); + +void picolcd_fb_unload(void); + +void picolcd_fb_refresh(struct picolcd_data *data); +#define picolcd_fbinfo(d) ((d)->fb_info) +#else +static inline int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + return 0; +} +static inline int picolcd_init_framebuffer(struct picolcd_data *data) +{ + return 0; +} +static inline void picolcd_exit_framebuffer(struct picolcd_data *data) +{ +} +static inline void picolcd_fb_unload(void) +{ +} +static inline void picolcd_fb_refresh(struct picolcd_data *data) +{ +} +#define picolcd_fbinfo(d) NULL +#endif /* CONFIG_HID_PICOLCD_FB */ + + +#ifdef CONFIG_HID_PICOLCD_BACKLIGHT +int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_backlight(struct picolcd_data *data); + +int picolcd_resume_backlight(struct picolcd_data *data); + +void picolcd_suspend_backlight(struct picolcd_data *data); +#else +static inline int picolcd_init_backlight(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_backlight(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_backlight(struct picolcd_data *data) +{ + return 0; +} +static inline void picolcd_suspend_backlight(struct picolcd_data *data) +{ +} + +#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */ + + +#ifdef CONFIG_HID_PICOLCD_LCD +int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_lcd(struct picolcd_data *data); + +int picolcd_resume_lcd(struct picolcd_data *data); +#else +static inline int picolcd_init_lcd(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_lcd(struct picolcd_data *data) +{ +} +static inline int picolcd_resume_lcd(struct picolcd_data *data) +{ + return 0; +} +#endif /* CONFIG_HID_PICOLCD_LCD */ + + +#ifdef CONFIG_HID_PICOLCD_LEDS +int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report); + +void picolcd_exit_leds(struct picolcd_data *data); + +void picolcd_leds_set(struct picolcd_data *data); +#else +static inline int picolcd_init_leds(struct picolcd_data *data, + struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_leds(struct picolcd_data *data) +{ +} +static inline void picolcd_leds_set(struct picolcd_data *data) +{ +} +#endif /* CONFIG_HID_PICOLCD_LEDS */ + + +#ifdef CONFIG_HID_PICOLCD_CIR +int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size); + +int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report); + +void picolcd_exit_cir(struct picolcd_data *data); +#else +static inline int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + return 1; +} +static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + return 0; +} +static inline void picolcd_exit_cir(struct picolcd_data *data) +{ +} +#endif /* CONFIG_HID_PICOLCD_LIRC */ + +int picolcd_reset(struct hid_device *hdev); +struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size); diff --git a/drivers/hid/hid-picolcd_backlight.c b/drivers/hid/hid-picolcd_backlight.c new file mode 100644 index 0000000..cd1ccd7 --- /dev/null +++ b/drivers/hid/hid-picolcd_backlight.c @@ -0,0 +1,121 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/backlight.h> + +#include "hid-picolcd.h" + +static int picolcd_get_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + return data->lcd_brightness; +} + +static int picolcd_set_brightness(struct backlight_device *bdev) +{ + struct picolcd_data *data = bl_get_data(bdev); + struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_brightness = bdev->props.brightness & 0x0ff; + data->lcd_power = bdev->props.power; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev)); +} + +static const struct backlight_ops picolcd_blops = { + .update_status = picolcd_set_brightness, + .get_brightness = picolcd_get_brightness, + .check_fb = picolcd_check_bl_fb, +}; + +int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct backlight_device *bdev; + struct backlight_properties props; + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported BRIGHTNESS report"); + return -EINVAL; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 0xff; + bdev = backlight_device_register(dev_name(dev), dev, data, + &picolcd_blops, &props); + if (IS_ERR(bdev)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bdev); + } + bdev->props.brightness = 0xff; + data->lcd_brightness = 0xff; + data->backlight = bdev; + picolcd_set_brightness(bdev); + return 0; +} + +void picolcd_exit_backlight(struct picolcd_data *data) +{ + struct backlight_device *bdev = data->backlight; + + data->backlight = NULL; + if (bdev) + backlight_device_unregister(bdev); +} + +int picolcd_resume_backlight(struct picolcd_data *data) +{ + if (!data->backlight) + return 0; + return picolcd_set_brightness(data->backlight); +} + +#ifdef CONFIG_PM +void picolcd_suspend_backlight(struct picolcd_data *data) +{ + int bl_power = data->lcd_power; + if (!data->backlight) + return; + + data->backlight->props.power = FB_BLANK_POWERDOWN; + picolcd_set_brightness(data->backlight); + data->lcd_power = data->backlight->props.power = bl_power; +} +#endif /* CONFIG_PM */ + diff --git a/drivers/hid/hid-picolcd_cir.c b/drivers/hid/hid-picolcd_cir.c new file mode 100644 index 0000000..dc632c3 --- /dev/null +++ b/drivers/hid/hid-picolcd_cir.c @@ -0,0 +1,61 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <linux/leds.h> + +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +int picolcd_raw_cir(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + /* Need understanding of CIR data format to implement ... */ + return 1; +} + +/* initialize CIR input device */ +int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report) +{ + /* support not implemented yet */ + return 0; +} + +void picolcd_exit_cir(struct picolcd_data *data) +{ +} + diff --git a/drivers/hid/hid-picolcd_core.c b/drivers/hid/hid-picolcd_core.c new file mode 100644 index 0000000..36e7548 --- /dev/null +++ b/drivers/hid/hid-picolcd_core.c @@ -0,0 +1,704 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +/* Input device + * + * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys + * and header for 4x4 key matrix. The built-in keys are part of the matrix. + */ +static const unsigned short def_keymap[PICOLCD_KEYS] = { + KEY_RESERVED, /* none */ + KEY_BACK, /* col 4 + row 1 */ + KEY_HOMEPAGE, /* col 3 + row 1 */ + KEY_RESERVED, /* col 2 + row 1 */ + KEY_RESERVED, /* col 1 + row 1 */ + KEY_SCROLLUP, /* col 4 + row 2 */ + KEY_OK, /* col 3 + row 2 */ + KEY_SCROLLDOWN, /* col 2 + row 2 */ + KEY_RESERVED, /* col 1 + row 2 */ + KEY_RESERVED, /* col 4 + row 3 */ + KEY_RESERVED, /* col 3 + row 3 */ + KEY_RESERVED, /* col 2 + row 3 */ + KEY_RESERVED, /* col 1 + row 3 */ + KEY_RESERVED, /* col 4 + row 4 */ + KEY_RESERVED, /* col 3 + row 4 */ + KEY_RESERVED, /* col 2 + row 4 */ + KEY_RESERVED, /* col 1 + row 4 */ +}; + + +/* Find a given report */ +struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir) +{ + struct list_head *feature_report_list = &hdev->report_enum[dir].report_list; + struct hid_report *report = NULL; + + list_for_each_entry(report, feature_report_list, list) { + if (report->id == id) + return report; + } + hid_warn(hdev, "No report with id 0x%x found\n", id); + return NULL; +} + +/* Submit a report and wait for a reply from device - if device fades away + * or does not respond in time, return NULL */ +struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev, + int report_id, const u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *work; + struct hid_report *report = picolcd_out_report(report_id, hdev); + unsigned long flags; + int i, j, k; + + if (!report || !data) + return NULL; + if (data->status & PICOLCD_FAILED) + return NULL; + work = kzalloc(sizeof(*work), GFP_KERNEL); + if (!work) + return NULL; + + init_completion(&work->ready); + work->out_report = report; + work->in_report = NULL; + work->raw_size = 0; + + mutex_lock(&data->mutex); + spin_lock_irqsave(&data->lock, flags); + for (i = k = 0; i < report->maxfield; i++) + for (j = 0; j < report->field[i]->report_count; j++) { + hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0); + k++; + } + data->pending = work; + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + wait_for_completion_interruptible_timeout(&work->ready, HZ*2); + spin_lock_irqsave(&data->lock, flags); + data->pending = NULL; + spin_unlock_irqrestore(&data->lock, flags); + mutex_unlock(&data->mutex); + return work; +} + +/* + * input class device + */ +static int picolcd_raw_keypad(struct picolcd_data *data, + struct hid_report *report, u8 *raw_data, int size) +{ + /* + * Keypad event + * First and second data bytes list currently pressed keys, + * 0x00 means no key and at most 2 keys may be pressed at same time + */ + int i, j; + + /* determine newly pressed keys */ + for (i = 0; i < size; i++) { + unsigned int key_code; + if (raw_data[i] == 0) + continue; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_already_down; + for (j = 0; j < sizeof(data->pressed_keys); j++) + if (data->pressed_keys[j] == 0) { + data->pressed_keys[j] = raw_data[i]; + break; + } + input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]); + if (raw_data[i] < PICOLCD_KEYS) + key_code = data->keycode[raw_data[i]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key press for %u:%d", + raw_data[i], key_code); + input_report_key(data->input_keys, key_code, 1); + } + input_sync(data->input_keys); +key_already_down: + continue; + } + + /* determine newly released keys */ + for (j = 0; j < sizeof(data->pressed_keys); j++) { + unsigned int key_code; + if (data->pressed_keys[j] == 0) + continue; + for (i = 0; i < size; i++) + if (data->pressed_keys[j] == raw_data[i]) + goto key_still_down; + input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]); + if (data->pressed_keys[j] < PICOLCD_KEYS) + key_code = data->keycode[data->pressed_keys[j]]; + else + key_code = KEY_UNKNOWN; + if (key_code != KEY_UNKNOWN) { + dbg_hid(PICOLCD_NAME " got key release for %u:%d", + data->pressed_keys[j], key_code); + input_report_key(data->input_keys, key_code, 0); + } + input_sync(data->input_keys); + data->pressed_keys[j] = 0; +key_still_down: + continue; + } + return 1; +} + +static int picolcd_check_version(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct picolcd_pending *verinfo; + int ret = 0; + + if (!data) + return -ENODEV; + + verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0); + if (!verinfo) { + hid_err(hdev, "no version response from PicoLCD\n"); + return -ENODEV; + } + + if (verinfo->raw_size == 2) { + data->version[0] = verinfo->raw_data[1]; + data->version[1] = verinfo->raw_data[0]; + if (data->status & PICOLCD_BOOTLOADER) { + hid_info(hdev, "PicoLCD, bootloader version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + } else { + hid_info(hdev, "PicoLCD, firmware version %d.%d\n", + verinfo->raw_data[1], verinfo->raw_data[0]); + } + } else { + hid_err(hdev, "confused, got unexpected version response from PicoLCD\n"); + ret = -EINVAL; + } + kfree(verinfo); + return ret; +} + +/* + * Reset our device and wait for answer to VERSION request + */ +int picolcd_reset(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev); + unsigned long flags; + int error; + + if (!data || !report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + + /* perform the reset */ + hid_set_field(report->field[0], 0, 1); + usbhid_submit_report(hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + + error = picolcd_check_version(hdev); + if (error) + return error; + + picolcd_resume_lcd(data); + picolcd_resume_backlight(data); + picolcd_fb_refresh(data); + picolcd_leds_set(data); + return 0; +} + +/* + * The "operation_mode" sysfs attribute + */ +static ssize_t picolcd_operation_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + if (data->status & PICOLCD_BOOTLOADER) + return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n"); + else + return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n"); +} + +static ssize_t picolcd_operation_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + struct hid_report *report = NULL; + size_t cnt = count; + int timeout = data->opmode_delay; + unsigned long flags; + + if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) { + if (data->status & PICOLCD_BOOTLOADER) + report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev); + buf += 3; + cnt -= 3; + } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) { + if (!(data->status & PICOLCD_BOOTLOADER)) + report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev); + buf += 10; + cnt -= 10; + } + if (!report) + return -EINVAL; + + while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r')) + cnt--; + if (cnt != 0) + return -EINVAL; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, timeout & 0xff); + hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return count; +} + +static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show, + picolcd_operation_mode_store); + +/* + * The "operation_mode_delay" sysfs attribute + */ +static ssize_t picolcd_operation_mode_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + + return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay); +} + +static ssize_t picolcd_operation_mode_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned u; + if (sscanf(buf, "%u", &u) != 1) + return -EINVAL; + if (u > 30000) + return -EINVAL; + else + data->opmode_delay = u; + return count; +} + +static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show, + picolcd_operation_mode_delay_store); + +/* + * Handle raw report as sent by device + */ +static int picolcd_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *raw_data, int size) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + int ret = 0; + + if (!data) + return 1; + + if (report->id == REPORT_KEY_STATE) { + if (data->input_keys) + ret = picolcd_raw_keypad(data, report, raw_data+1, size-1); + } else if (report->id == REPORT_IR_DATA) { + if (data->input_cir) + ret = picolcd_raw_cir(data, report, raw_data+1, size-1); + } else { + spin_lock_irqsave(&data->lock, flags); + /* + * We let the caller of picolcd_send_and_wait() check if the + * report we got is one of the expected ones or not. + */ + if (data->pending) { + memcpy(data->pending->raw_data, raw_data+1, size-1); + data->pending->raw_size = size-1; + data->pending->in_report = report; + complete(&data->pending->ready); + } + spin_unlock_irqrestore(&data->lock, flags); + } + + picolcd_debug_raw_event(data, hdev, report, raw_data, size); + return 1; +} + +#ifdef CONFIG_PM +static int picolcd_suspend(struct hid_device *hdev, pm_message_t message) +{ + if (PMSG_IS_AUTO(message)) + return 0; + + picolcd_suspend_backlight(hid_get_drvdata(hdev)); + dbg_hid(PICOLCD_NAME " device ready for suspend\n"); + return 0; +} + +static int picolcd_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + return 0; +} + +static int picolcd_reset_resume(struct hid_device *hdev) +{ + int ret; + ret = picolcd_reset(hdev); + if (ret) + dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret); + ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0); + if (ret) + dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret); + ret = picolcd_resume_lcd(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret); + ret = picolcd_resume_backlight(hid_get_drvdata(hdev)); + if (ret) + dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret); + picolcd_leds_set(hid_get_drvdata(hdev)); + return 0; +} +#endif + +/* initialize keypad input device */ +static int picolcd_init_keys(struct picolcd_data *data, + struct hid_report *report) +{ + struct hid_device *hdev = data->hdev; + struct input_dev *idev; + int error, i; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 2 || + report->field[0]->report_size != 8) { + hid_err(hdev, "unsupported KEY_STATE report\n"); + return -EINVAL; + } + + idev = input_allocate_device(); + if (idev == NULL) { + hid_err(hdev, "failed to allocate input device\n"); + return -ENOMEM; + } + input_set_drvdata(idev, hdev); + memcpy(data->keycode, def_keymap, sizeof(def_keymap)); + idev->name = hdev->name; + idev->phys = hdev->phys; + idev->uniq = hdev->uniq; + idev->id.bustype = hdev->bus; + idev->id.vendor = hdev->vendor; + idev->id.product = hdev->product; + idev->id.version = hdev->version; + idev->dev.parent = hdev->dev.parent; + idev->keycode = &data->keycode; + idev->keycodemax = PICOLCD_KEYS; + idev->keycodesize = sizeof(data->keycode[0]); + input_set_capability(idev, EV_MSC, MSC_SCAN); + set_bit(EV_REP, idev->evbit); + for (i = 0; i < PICOLCD_KEYS; i++) + input_set_capability(idev, EV_KEY, data->keycode[i]); + error = input_register_device(idev); + if (error) { + hid_err(hdev, "error registering the input device\n"); + input_free_device(idev); + return error; + } + data->input_keys = idev; + return 0; +} + +static void picolcd_exit_keys(struct picolcd_data *data) +{ + struct input_dev *idev = data->input_keys; + + data->input_keys = NULL; + if (idev) + input_unregister_device(idev); +} + +static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data) +{ + int error; + + error = picolcd_check_version(hdev); + if (error) + return error; + + if (data->version[0] != 0 && data->version[1] != 3) + hid_info(hdev, "Device with untested firmware revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", + dev_name(&hdev->dev)); + + /* Setup keypad input device */ + error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev)); + if (error) + goto err; + + /* Setup CIR input device */ + error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev)); + if (error) + goto err; + + /* Set up the framebuffer device */ + error = picolcd_init_framebuffer(data); + if (error) + goto err; + + /* Setup lcd class device */ + error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev)); + if (error) + goto err; + + /* Setup backlight class device */ + error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev)); + if (error) + goto err; + + /* Setup the LED class devices */ + error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev)); + if (error) + goto err; + + picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev), + picolcd_out_report(REPORT_EE_WRITE, hdev), + picolcd_out_report(REPORT_READ_MEMORY, hdev), + picolcd_out_report(REPORT_WRITE_MEMORY, hdev), + picolcd_out_report(REPORT_RESET, hdev)); + return 0; +err: + picolcd_exit_leds(data); + picolcd_exit_backlight(data); + picolcd_exit_lcd(data); + picolcd_exit_framebuffer(data); + picolcd_exit_cir(data); + picolcd_exit_keys(data); + return error; +} + +static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data) +{ + int error; + + error = picolcd_check_version(hdev); + if (error) + return error; + + if (data->version[0] != 1 && data->version[1] != 0) + hid_info(hdev, "Device with untested bootloader revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n", + dev_name(&hdev->dev)); + + picolcd_init_devfs(data, NULL, NULL, + picolcd_out_report(REPORT_BL_READ_MEMORY, hdev), + picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL); + return 0; +} + +static int picolcd_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct picolcd_data *data; + int error = -ENOMEM; + + dbg_hid(PICOLCD_NAME " hardware probe...\n"); + + /* + * Let's allocate the picolcd data structure, set some reasonable + * defaults, and associate it with the device + */ + data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL); + if (data == NULL) { + hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n"); + error = -ENOMEM; + goto err_no_cleanup; + } + + spin_lock_init(&data->lock); + mutex_init(&data->mutex); + data->hdev = hdev; + data->opmode_delay = 5000; + if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER) + data->status |= PICOLCD_BOOTLOADER; + hid_set_drvdata(hdev, data); + + /* Parse the device reports and start it up */ + error = hid_parse(hdev); + if (error) { + hid_err(hdev, "device report parse failed\n"); + goto err_cleanup_data; + } + + /* We don't use hidinput but hid_hw_start() fails if nothing is + * claimed. So spoof claimed input. */ + hdev->claimed = HID_CLAIMED_INPUT; + error = hid_hw_start(hdev, 0); + hdev->claimed = 0; + if (error) { + hid_err(hdev, "hardware start failed\n"); + goto err_cleanup_data; + } + + error = hid_hw_open(hdev); + if (error) { + hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n"); + goto err_cleanup_hid_hw; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay); + if (error) { + hid_err(hdev, "failed to create sysfs attributes\n"); + goto err_cleanup_hid_ll; + } + + error = device_create_file(&hdev->dev, &dev_attr_operation_mode); + if (error) { + hid_err(hdev, "failed to create sysfs attributes\n"); + goto err_cleanup_sysfs1; + } + + if (data->status & PICOLCD_BOOTLOADER) + error = picolcd_probe_bootloader(hdev, data); + else + error = picolcd_probe_lcd(hdev, data); + if (error) + goto err_cleanup_sysfs2; + + dbg_hid(PICOLCD_NAME " activated and initialized\n"); + return 0; + +err_cleanup_sysfs2: + device_remove_file(&hdev->dev, &dev_attr_operation_mode); +err_cleanup_sysfs1: + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); +err_cleanup_hid_ll: + hid_hw_close(hdev); +err_cleanup_hid_hw: + hid_hw_stop(hdev); +err_cleanup_data: + kfree(data); +err_no_cleanup: + hid_set_drvdata(hdev, NULL); + + return error; +} + +static void picolcd_remove(struct hid_device *hdev) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + unsigned long flags; + + dbg_hid(PICOLCD_NAME " hardware remove...\n"); + spin_lock_irqsave(&data->lock, flags); + data->status |= PICOLCD_FAILED; + spin_unlock_irqrestore(&data->lock, flags); + + picolcd_exit_devfs(data); + device_remove_file(&hdev->dev, &dev_attr_operation_mode); + device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay); + hid_hw_close(hdev); + hid_hw_stop(hdev); + hid_set_drvdata(hdev, NULL); + + /* Shortcut potential pending reply that will never arrive */ + spin_lock_irqsave(&data->lock, flags); + if (data->pending) + complete(&data->pending->ready); + spin_unlock_irqrestore(&data->lock, flags); + + /* Cleanup LED */ + picolcd_exit_leds(data); + /* Clean up the framebuffer */ + picolcd_exit_backlight(data); + picolcd_exit_lcd(data); + picolcd_exit_framebuffer(data); + /* Cleanup input */ + picolcd_exit_cir(data); + picolcd_exit_keys(data); + + mutex_destroy(&data->mutex); + /* Finally, clean up the picolcd data itself */ + kfree(data); +} + +static const struct hid_device_id picolcd_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, + { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, + { } +}; +MODULE_DEVICE_TABLE(hid, picolcd_devices); + +static struct hid_driver picolcd_driver = { + .name = "hid-picolcd", + .id_table = picolcd_devices, + .probe = picolcd_probe, + .remove = picolcd_remove, + .raw_event = picolcd_raw_event, +#ifdef CONFIG_PM + .suspend = picolcd_suspend, + .resume = picolcd_resume, + .reset_resume = picolcd_reset_resume, +#endif +}; + +static int __init picolcd_init(void) +{ + return hid_register_driver(&picolcd_driver); +} + +static void __exit picolcd_exit(void) +{ + hid_unregister_driver(&picolcd_driver); + picolcd_fb_unload(); +} + +module_init(picolcd_init); +module_exit(picolcd_exit); +MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hid/hid-picolcd_debugfs.c b/drivers/hid/hid-picolcd_debugfs.c new file mode 100644 index 0000000..ff74645 --- /dev/null +++ b/drivers/hid/hid-picolcd_debugfs.c @@ -0,0 +1,898 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/module.h> + +#include "hid-picolcd.h" + + +static int picolcd_debug_reset_show(struct seq_file *f, void *p) +{ + if (picolcd_fbinfo((struct picolcd_data *)f->private)) + seq_printf(f, "all fb\n"); + else + seq_printf(f, "all\n"); + return 0; +} + +static int picolcd_debug_reset_open(struct inode *inode, struct file *f) +{ + return single_open(f, picolcd_debug_reset_show, inode->i_private); +} + +static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; + char buf[32]; + size_t cnt = min(count, sizeof(buf)-1); + if (copy_from_user(buf, user_buf, cnt)) + return -EFAULT; + + while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) + cnt--; + buf[cnt] = '\0'; + if (strcmp(buf, "all") == 0) { + picolcd_reset(data->hdev); + picolcd_fb_reset(data, 1); + } else if (strcmp(buf, "fb") == 0) { + picolcd_fb_reset(data, 1); + } else { + return -EINVAL; + } + return count; +} + +static const struct file_operations picolcd_debug_reset_fops = { + .owner = THIS_MODULE, + .open = picolcd_debug_reset_open, + .read = seq_read, + .llseek = seq_lseek, + .write = picolcd_debug_reset_write, + .release = single_release, +}; + +/* + * The "eeprom" file + */ +static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + u8 raw_data[3]; + ssize_t ret = -EIO; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return 0; + + /* prepare buffer with info about what we want to read (addr & len) */ + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) & 0xff; + raw_data[2] = s < 20 ? s : 20; + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, + sizeof(raw_data)); + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* successful read :) */ + ret = resp->raw_data[2]; + if (ret > s) + ret = s; + if (copy_to_user(u, resp->raw_data+3, ret)) + ret = -EFAULT; + else + *off += ret; + } /* anything else is some kind of IO error */ + + kfree(resp); + return ret; +} + +static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + struct picolcd_pending *resp; + ssize_t ret = -EIO; + u8 raw_data[23]; + + if (s == 0) + return -EINVAL; + if (*off > 0x0ff) + return -ENOSPC; + + memset(raw_data, 0, sizeof(raw_data)); + raw_data[0] = *off & 0xff; + raw_data[1] = (*off >> 8) & 0xff; + raw_data[2] = min((size_t)20, s); + if (*off + raw_data[2] > 0xff) + raw_data[2] = 0x100 - *off; + + if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) + return -EFAULT; + resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, + sizeof(raw_data)); + + if (!resp) + return -EIO; + + if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { + /* check if written data matches */ + if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { + *off += raw_data[2]; + ret = raw_data[2]; + } + } + kfree(resp); + return ret; +} + +/* + * Notes: + * - read/write happens in chunks of at most 20 bytes, it's up to userspace + * to loop in order to get more data. + * - on write errors on otherwise correct write request the bytes + * that should have been written are in undefined state. + */ +static const struct file_operations picolcd_debug_eeprom_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = picolcd_debug_eeprom_read, + .write = picolcd_debug_eeprom_write, + .llseek = generic_file_llseek, +}; + +/* + * The "flash" file + */ +/* record a flash address to buf (bounds check to be done by caller) */ +static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) +{ + buf[0] = off & 0xff; + buf[1] = (off >> 8) & 0xff; + if (data->addr_sz == 3) + buf[2] = (off >> 16) & 0xff; + return data->addr_sz == 2 ? 2 : 3; +} + +/* read a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, + char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[4]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_READ_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) + goto skip; + if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { + err = -EFAULT; + goto skip; + } + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + return ret > 0 ? ret : err; + } + return ret; +} + +static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + + if (s == 0) + return -EINVAL; + if (*off > 0x05fff) + return 0; + if (*off + s > 0x05fff) + s = 0x06000 - *off; + + if (data->status & PICOLCD_BOOTLOADER) + return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); + else + return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); +} + +/* erase block aligned to 64bytes boundary */ +static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, + loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[3]; + int len_off; + ssize_t ret = -EIO; + + if (*off & 0x3f) + return -EINVAL; + + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_ERASE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off) != 0) + goto skip; + ret = 0; + } +skip: + kfree(resp); + return ret; +} + +/* write a given size of data (bounds check to be done by caller) */ +static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, + const char __user *u, size_t s, loff_t *off) +{ + struct picolcd_pending *resp; + u8 raw_data[36]; + ssize_t ret = 0; + int len_off, err = -EIO; + + while (s > 0) { + err = -EIO; + len_off = _picolcd_flash_setaddr(data, raw_data, *off); + raw_data[len_off] = s > 32 ? 32 : s; + if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { + err = -EFAULT; + break; + } + resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, + len_off+1+raw_data[len_off]); + if (!resp || !resp->in_report) + goto skip; + if (resp->in_report->id == REPORT_MEMORY || + resp->in_report->id == REPORT_BL_WRITE_MEMORY) { + if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) + goto skip; + *off += raw_data[len_off]; + s -= raw_data[len_off]; + ret += raw_data[len_off]; + err = 0; + } +skip: + kfree(resp); + if (err) + break; + } + return ret > 0 ? ret : err; +} + +static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, + size_t s, loff_t *off) +{ + struct picolcd_data *data = f->private_data; + ssize_t err, ret = 0; + int report_erase, report_write; + + if (s == 0) + return -EINVAL; + if (*off > 0x5fff) + return -ENOSPC; + if (s & 0x3f) + return -EINVAL; + if (*off & 0x3f) + return -EINVAL; + + if (data->status & PICOLCD_BOOTLOADER) { + report_erase = REPORT_BL_ERASE_MEMORY; + report_write = REPORT_BL_WRITE_MEMORY; + } else { + report_erase = REPORT_ERASE_MEMORY; + report_write = REPORT_WRITE_MEMORY; + } + mutex_lock(&data->mutex_flash); + while (s > 0) { + err = _picolcd_flash_erase64(data, report_erase, off); + if (err) + break; + err = _picolcd_flash_write(data, report_write, u, 64, off); + if (err < 0) + break; + ret += err; + *off += err; + s -= err; + if (err != 64) + break; + } + mutex_unlock(&data->mutex_flash); + return ret > 0 ? ret : err; +} + +/* + * Notes: + * - concurrent writing is prevented by mutex and all writes must be + * n*64 bytes and 64-byte aligned, each write being preceded by an + * ERASE which erases a 64byte block. + * If less than requested was written or an error is returned for an + * otherwise correct write request the next 64-byte block which should + * have been written is in undefined state (mostly: original, erased, + * (half-)written with write error) + * - reading can happen without special restriction + */ +static const struct file_operations picolcd_debug_flash_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = picolcd_debug_flash_read, + .write = picolcd_debug_flash_write, + .llseek = generic_file_llseek, +}; + + +/* + * Helper code for HID report level dumping/debugging + */ +static const char *error_codes[] = { + "success", "parameter missing", "data_missing", "block readonly", + "block not erasable", "block too big", "section overflow", + "invalid command length", "invalid data length", +}; + +static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, + const size_t data_len) +{ + int i, j; + for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) { + dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; + dst[j++] = hex_asc[data[i] & 0x0f]; + dst[j++] = ' '; + } + if (j < dst_sz) { + dst[j--] = '\0'; + dst[j] = '\n'; + } else + dst[j] = '\0'; +} + +void picolcd_debug_out_report(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report) +{ + u8 raw_data[70]; + int raw_size = (report->size >> 3) + 1; + char *buff; +#define BUFF_SZ 256 + + /* Avoid unnecessary overhead if debugfs is disabled */ + if (!hdev->debug_events) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", + report->id, raw_size); + hid_debug_event(hdev, buff); + if (raw_size + 5 > sizeof(raw_data)) { + kfree(buff); + hid_debug_event(hdev, " TOO BIG\n"); + return; + } else { + raw_data[0] = report->id; + hid_output_report(report, raw_data); + dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); + hid_debug_event(hdev, buff); + } + + switch (report->id) { + case REPORT_LED_STATE: + /* 1 data byte with GPO state */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LED_STATE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BRIGHTNESS: + /* 1 data byte with brightness */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_BRIGHTNESS", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_CONTRAST: + /* 1 data byte with contrast */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_CONTRAST", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_RESET: + /* 2 data bytes with reset duration in ms */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_RESET", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", + raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD: + /* 63 data bytes with LCD commands */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + /* TODO: format decoding */ + break; + case REPORT_LCD_DATA: + /* 63 data bytes with LCD data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_LCD_CMD_DATA: + /* 63 data bytes with LCD commands and data */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_LCD_CMD", report->id, raw_size-1); + /* TODO: format decoding */ + hid_debug_event(hdev, buff); + break; + case REPORT_EE_READ: + /* 3 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_READ", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_EE_WRITE: + /* 3+1..20 data bytes with write area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EE_WRITE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_ERASE_MEMORY: + case REPORT_BL_ERASE_MEMORY: + /* 3 data bytes with pointer inside erase block */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_ERASE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_READ_MEMORY: + case REPORT_BL_READ_MEMORY: + /* 4 data bytes with read area description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_READ_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_WRITE_MEMORY: + case REPORT_BL_WRITE_MEMORY: + /* 4+1..32 data bytes with write adrea description */ + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_WRITE_MEMORY", report->id, raw_size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= raw_size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_RESTART: + /* TODO */ + break; + case REPORT_EXIT_KEYBOARD: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + case REPORT_EXIT_FLASHER: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, raw_size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", + raw_data[1] | (raw_data[2] << 8), + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", + "<unknown>", report->id, raw_size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +void picolcd_debug_raw_event(struct picolcd_data *data, + struct hid_device *hdev, struct hid_report *report, + u8 *raw_data, int size) +{ + char *buff; + +#define BUFF_SZ 256 + /* Avoid unnecessary overhead if debugfs is disabled */ + if (!hdev->debug_events) + return; + + buff = kmalloc(BUFF_SZ, GFP_ATOMIC); + if (!buff) + return; + + switch (report->id) { + case REPORT_ERROR_CODE: + /* 2 data bytes with affected report and error code */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_ERROR_CODE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[2] < ARRAY_SIZE(error_codes)) + snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", + raw_data[2], error_codes[raw_data[2]], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_KEY_STATE: + /* 2 data bytes with key state */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_KEY_STATE", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) + snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); + else if (raw_data[2] == 0) + snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", + raw_data[1], raw_data[1]); + else + snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", + raw_data[1], raw_data[1], raw_data[2], raw_data[2]); + hid_debug_event(hdev, buff); + break; + case REPORT_IR_DATA: + /* Up to 20 byes of IR scancode data */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_IR_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + if (raw_data[1] == 0) { + snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[1] + 1 <= size) { + snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", + raw_data[1]-1); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", + raw_data[1]-1); + hid_debug_event(hdev, buff); + } + break; + case REPORT_EE_DATA: + /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_EE_DATA", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + hid_debug_event(hdev, buff); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + hid_debug_event(hdev, buff); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + hid_debug_event(hdev, buff); + } + break; + case REPORT_MEMORY: + /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + switch (data->addr_sz) { + case 2: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); + hid_debug_event(hdev, buff); + if (raw_data[3] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[3] + 4 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + case 3: + snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", + raw_data[3], raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); + hid_debug_event(hdev, buff); + if (raw_data[4] == 0) { + snprintf(buff, BUFF_SZ, "\tNo data\n"); + } else if (raw_data[4] + 5 <= size) { + snprintf(buff, BUFF_SZ, "\tData: "); + hid_debug_event(hdev, buff); + dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); + } else { + snprintf(buff, BUFF_SZ, "\tData overflowed\n"); + } + break; + default: + snprintf(buff, BUFF_SZ, "\tNot supported\n"); + } + hid_debug_event(hdev, buff); + break; + case REPORT_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[2], raw_data[1]); + hid_debug_event(hdev, buff); + break; + case REPORT_BL_ERASE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_ERASE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_READ_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_READ_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_BL_WRITE_MEMORY: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_BL_WRITE_MEMORY", report->id, size-1); + hid_debug_event(hdev, buff); + /* TODO */ + break; + case REPORT_DEVID: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_DEVID", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", + raw_data[1], raw_data[2], raw_data[3], raw_data[4]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", + raw_data[5]); + hid_debug_event(hdev, buff); + break; + case REPORT_SPLASH_SIZE: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_SPLASH_SIZE", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", + (raw_data[2] << 8) | raw_data[1]); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", + (raw_data[4] << 8) | raw_data[3]); + hid_debug_event(hdev, buff); + break; + case REPORT_HOOK_VERSION: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "REPORT_HOOK_VERSION", report->id, size-1); + hid_debug_event(hdev, buff); + snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", + raw_data[1], raw_data[2]); + hid_debug_event(hdev, buff); + break; + default: + snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", + "<unknown>", report->id, size-1); + hid_debug_event(hdev, buff); + break; + } + wake_up_interruptible(&hdev->debug_wait); + kfree(buff); +} + +void picolcd_init_devfs(struct picolcd_data *data, + struct hid_report *eeprom_r, struct hid_report *eeprom_w, + struct hid_report *flash_r, struct hid_report *flash_w, + struct hid_report *reset) +{ + struct hid_device *hdev = data->hdev; + + mutex_init(&data->mutex_flash); + + /* reset */ + if (reset) + data->debug_reset = debugfs_create_file("reset", 0600, + hdev->debug_dir, data, &picolcd_debug_reset_fops); + + /* eeprom */ + if (eeprom_r || eeprom_w) + data->debug_eeprom = debugfs_create_file("eeprom", + (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_eeprom_fops); + + /* flash */ + if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) + data->addr_sz = flash_r->field[0]->report_count - 1; + else + data->addr_sz = -1; + if (data->addr_sz == 2 || data->addr_sz == 3) { + data->debug_flash = debugfs_create_file("flash", + (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), + hdev->debug_dir, data, &picolcd_debug_flash_fops); + } else if (flash_r || flash_w) + hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); +} + +void picolcd_exit_devfs(struct picolcd_data *data) +{ + struct dentry *dent; + + dent = data->debug_reset; + data->debug_reset = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_eeprom; + data->debug_eeprom = NULL; + if (dent) + debugfs_remove(dent); + dent = data->debug_flash; + data->debug_flash = NULL; + if (dent) + debugfs_remove(dent); + mutex_destroy(&data->mutex_flash); +} + diff --git a/drivers/hid/hid-picolcd_fb.c b/drivers/hid/hid-picolcd_fb.c new file mode 100644 index 0000000..b2124f5 --- /dev/null +++ b/drivers/hid/hid-picolcd_fb.c @@ -0,0 +1,673 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + +/* Framebuffer + * + * The PicoLCD use a Topway LCD module of 256x64 pixel + * This display area is tiled over 4 controllers with 8 tiles + * each. Each tile has 8x64 pixel, each data byte representing + * a 1-bit wide vertical line of the tile. + * + * The display can be updated at a tile granularity. + * + * Chip 1 Chip 2 Chip 3 Chip 4 + * +----------------+----------------+----------------+----------------+ + * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | + * +----------------+----------------+----------------+----------------+ + * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | + * +----------------+----------------+----------------+----------------+ + * ... + * +----------------+----------------+----------------+----------------+ + * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | + * +----------------+----------------+----------------+----------------+ + */ +#define PICOLCDFB_NAME "picolcdfb" +#define PICOLCDFB_WIDTH (256) +#define PICOLCDFB_HEIGHT (64) +#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) + +#define PICOLCDFB_UPDATE_RATE_LIMIT 10 +#define PICOLCDFB_UPDATE_RATE_DEFAULT 2 + +/* Framebuffer visual structures */ +static const struct fb_fix_screeninfo picolcdfb_fix = { + .id = PICOLCDFB_NAME, + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .line_length = PICOLCDFB_WIDTH / 8, + .accel = FB_ACCEL_NONE, +}; + +static const struct fb_var_screeninfo picolcdfb_var = { + .xres = PICOLCDFB_WIDTH, + .yres = PICOLCDFB_HEIGHT, + .xres_virtual = PICOLCDFB_WIDTH, + .yres_virtual = PICOLCDFB_HEIGHT, + .width = 103, + .height = 26, + .bits_per_pixel = 1, + .grayscale = 1, + .red = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .green = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .blue = { + .offset = 0, + .length = 1, + .msb_right = 0, + }, + .transp = { + .offset = 0, + .length = 0, + .msb_right = 0, + }, +}; + +/* Send a given tile to PicoLCD */ +static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile) +{ + struct picolcd_data *data = hid_get_drvdata(hdev); + struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev); + struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev); + unsigned long flags; + u8 *tdata; + int i; + + if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report1->field[0], 0, chip << 2); + hid_set_field(report1->field[0], 1, 0x02); + hid_set_field(report1->field[0], 2, 0x00); + hid_set_field(report1->field[0], 3, 0x00); + hid_set_field(report1->field[0], 4, 0xb8 | tile); + hid_set_field(report1->field[0], 5, 0x00); + hid_set_field(report1->field[0], 6, 0x00); + hid_set_field(report1->field[0], 7, 0x40); + hid_set_field(report1->field[0], 8, 0x00); + hid_set_field(report1->field[0], 9, 0x00); + hid_set_field(report1->field[0], 10, 32); + + hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); + hid_set_field(report2->field[0], 1, 0x00); + hid_set_field(report2->field[0], 2, 0x00); + hid_set_field(report2->field[0], 3, 32); + + tdata = data->fb_vbitmap + (tile * 4 + chip) * 64; + for (i = 0; i < 64; i++) + if (i < 32) + hid_set_field(report1->field[0], 11 + i, tdata[i]); + else + hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); + + usbhid_submit_report(data->hdev, report1, USB_DIR_OUT); + usbhid_submit_report(data->hdev, report2, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +/* Translate a single tile*/ +static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, + int chip, int tile) +{ + int i, b, changed = 0; + u8 tdata[64]; + u8 *vdata = vbitmap + (tile * 4 + chip) * 64; + + if (bpp == 1) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01; + } + } + } else if (bpp == 8) { + for (b = 7; b >= 0; b--) { + const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; + for (i = 0; i < 64; i++) { + tdata[i] <<= 1; + tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; + } + } + } else { + /* Oops, we should never get here! */ + WARN_ON(1); + return 0; + } + + for (i = 0; i < 64; i++) + if (tdata[i] != vdata[i]) { + changed = 1; + vdata[i] = tdata[i]; + } + return changed; +} + +void picolcd_fb_refresh(struct picolcd_data *data) +{ + if (data->fb_info) + schedule_delayed_work(&data->fb_info->deferred_work, 0); +} + +/* Reconfigure LCD display */ +int picolcd_fb_reset(struct picolcd_data *data, int clear) +{ + struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); + int i, j; + unsigned long flags; + static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; + + if (!report || report->maxfield != 1) + return -ENODEV; + + spin_lock_irqsave(&data->lock, flags); + for (i = 0; i < 4; i++) { + for (j = 0; j < report->field[0]->maxusage; j++) + if (j == 0) + hid_set_field(report->field[0], j, i << 2); + else if (j < sizeof(mapcmd)) + hid_set_field(report->field[0], j, mapcmd[j]); + else + hid_set_field(report->field[0], j, 0); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + } + + data->status |= PICOLCD_READY_FB; + spin_unlock_irqrestore(&data->lock, flags); + + if (data->fb_bitmap) { + if (clear) { + memset(data->fb_vbitmap, 0, PICOLCDFB_SIZE); + memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp); + } + data->fb_force = 1; + } + + /* schedule first output of framebuffer */ + picolcd_fb_refresh(data); + + return 0; +} + +/* Update fb_vbitmap from the screen_base and send changed tiles to device */ +static void picolcd_fb_update(struct picolcd_data *data) +{ + int chip, tile, n; + unsigned long flags; + + if (!data) + return; + + spin_lock_irqsave(&data->lock, flags); + if (!(data->status & PICOLCD_READY_FB)) { + spin_unlock_irqrestore(&data->lock, flags); + picolcd_fb_reset(data, 0); + } else { + spin_unlock_irqrestore(&data->lock, flags); + } + + /* + * Translate the framebuffer into the format needed by the PicoLCD. + * See display layout above. + * Do this one tile after the other and push those tiles that changed. + * + * Wait for our IO to complete as otherwise we might flood the queue! + */ + n = 0; + for (chip = 0; chip < 4; chip++) + for (tile = 0; tile < 8; tile++) + if (picolcd_fb_update_tile(data->fb_vbitmap, + data->fb_bitmap, data->fb_bpp, chip, tile) || + data->fb_force) { + n += 2; + if (!data->fb_info->par) + return; /* device lost! */ + if (n >= HID_OUTPUT_FIFO_SIZE / 2) { + usbhid_wait_io(data->hdev); + n = 0; + } + picolcd_fb_send_tile(data->hdev, chip, tile); + } + data->fb_force = false; + if (n) + usbhid_wait_io(data->hdev); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + if (!info->par) + return; + sys_fillrect(info, rect); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + if (!info->par) + return; + sys_copyarea(info, area); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* Stub to call the system default and update the image on the picoLCD */ +static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + if (!info->par) + return; + sys_imageblit(info, image); + + schedule_delayed_work(&info->deferred_work, 0); +} + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + if (!info->par) + return -ENODEV; + ret = fb_sys_write(info, buf, count, ppos); + if (ret >= 0) + schedule_delayed_work(&info->deferred_work, 0); + return ret; +} + +static int picolcd_fb_blank(int blank, struct fb_info *info) +{ + if (!info->par) + return -ENODEV; + /* We let fb notification do this for us via lcd/backlight device */ + return 0; +} + +static void picolcd_fb_destroy(struct fb_info *info) +{ + struct picolcd_data *data = info->par; + u32 *ref_cnt = info->pseudo_palette; + int may_release; + + info->par = NULL; + if (data) + data->fb_info = NULL; + fb_deferred_io_cleanup(info); + + ref_cnt--; + mutex_lock(&info->lock); + (*ref_cnt)--; + may_release = !*ref_cnt; + mutex_unlock(&info->lock); + if (may_release) { + vfree((u8 *)info->fix.smem_start); + framebuffer_release(info); + } +} + +static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + __u32 bpp = var->bits_per_pixel; + __u32 activate = var->activate; + + /* only allow 1/8 bit depth (8-bit is grayscale) */ + *var = picolcdfb_var; + var->activate = activate; + if (bpp >= 8) { + var->bits_per_pixel = 8; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + } else { + var->bits_per_pixel = 1; + var->red.length = 1; + var->green.length = 1; + var->blue.length = 1; + } + return 0; +} + +static int picolcd_set_par(struct fb_info *info) +{ + struct picolcd_data *data = info->par; + u8 *tmp_fb, *o_fb; + if (!data) + return -ENODEV; + if (info->var.bits_per_pixel == data->fb_bpp) + return 0; + /* switch between 1/8 bit depths */ + if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) + return -EINVAL; + + o_fb = data->fb_bitmap; + tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL); + if (!tmp_fb) + return -ENOMEM; + + /* translate FB content to new bits-per-pixel */ + if (info->var.bits_per_pixel == 1) { + int i, b; + for (i = 0; i < PICOLCDFB_SIZE; i++) { + u8 p = 0; + for (b = 0; b < 8; b++) { + p <<= 1; + p |= o_fb[i*8+b] ? 0x01 : 0x00; + } + tmp_fb[i] = p; + } + memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE); + info->fix.visual = FB_VISUAL_MONO01; + info->fix.line_length = PICOLCDFB_WIDTH / 8; + } else { + int i; + memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE); + for (i = 0; i < PICOLCDFB_SIZE * 8; i++) + o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; + info->fix.visual = FB_VISUAL_DIRECTCOLOR; + info->fix.line_length = PICOLCDFB_WIDTH; + } + + kfree(tmp_fb); + data->fb_bpp = info->var.bits_per_pixel; + return 0; +} + +/* Do refcounting on our FB and cleanup per worker if FB is + * closed after unplug of our device + * (fb_release holds info->lock and still touches info after + * we return so we can't release it immediately. + */ +struct picolcd_fb_cleanup_item { + struct fb_info *info; + struct picolcd_fb_cleanup_item *next; +}; +static struct picolcd_fb_cleanup_item *fb_pending; +static DEFINE_SPINLOCK(fb_pending_lock); + +static void picolcd_fb_do_cleanup(struct work_struct *data) +{ + struct picolcd_fb_cleanup_item *item; + unsigned long flags; + + do { + spin_lock_irqsave(&fb_pending_lock, flags); + item = fb_pending; + fb_pending = item ? item->next : NULL; + spin_unlock_irqrestore(&fb_pending_lock, flags); + + if (item) { + u8 *fb = (u8 *)item->info->fix.smem_start; + /* make sure we do not race against fb core when + * releasing */ + mutex_lock(&item->info->lock); + mutex_unlock(&item->info->lock); + framebuffer_release(item->info); + vfree(fb); + } + } while (item); +} + +static DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup); + +static int picolcd_fb_open(struct fb_info *info, int u) +{ + u32 *ref_cnt = info->pseudo_palette; + ref_cnt--; + + (*ref_cnt)++; + return 0; +} + +static int picolcd_fb_release(struct fb_info *info, int u) +{ + u32 *ref_cnt = info->pseudo_palette; + ref_cnt--; + + (*ref_cnt)++; + if (!*ref_cnt) { + unsigned long flags; + struct picolcd_fb_cleanup_item *item = (struct picolcd_fb_cleanup_item *)ref_cnt; + item--; + spin_lock_irqsave(&fb_pending_lock, flags); + item->next = fb_pending; + fb_pending = item; + spin_unlock_irqrestore(&fb_pending_lock, flags); + schedule_work(&picolcd_fb_cleanup); + } + return 0; +} + +/* Note this can't be const because of struct fb_info definition */ +static struct fb_ops picolcdfb_ops = { + .owner = THIS_MODULE, + .fb_destroy = picolcd_fb_destroy, + .fb_open = picolcd_fb_open, + .fb_release = picolcd_fb_release, + .fb_read = fb_sys_read, + .fb_write = picolcd_fb_write, + .fb_blank = picolcd_fb_blank, + .fb_fillrect = picolcd_fb_fillrect, + .fb_copyarea = picolcd_fb_copyarea, + .fb_imageblit = picolcd_fb_imageblit, + .fb_check_var = picolcd_fb_check_var, + .fb_set_par = picolcd_set_par, +}; + + +/* Callback from deferred IO workqueue */ +static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist) +{ + picolcd_fb_update(info->par); +} + +static const struct fb_deferred_io picolcd_fb_defio = { + .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, + .deferred_io = picolcd_fb_deferred_io, +}; + + +/* + * The "fb_update_rate" sysfs attribute + */ +static ssize_t picolcd_fb_update_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + unsigned i, fb_update_rate = data->fb_update_rate; + size_t ret = 0; + + for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) + if (ret >= PAGE_SIZE) + break; + else if (i == fb_update_rate) + ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i); + else + ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i); + if (ret > 0) + buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; + return ret; +} + +static ssize_t picolcd_fb_update_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct picolcd_data *data = dev_get_drvdata(dev); + int i; + unsigned u; + + if (count < 1 || count > 10) + return -EINVAL; + + i = sscanf(buf, "%u", &u); + if (i != 1) + return -EINVAL; + + if (u > PICOLCDFB_UPDATE_RATE_LIMIT) + return -ERANGE; + else if (u == 0) + u = PICOLCDFB_UPDATE_RATE_DEFAULT; + + data->fb_update_rate = u; + data->fb_defio.delay = HZ / data->fb_update_rate; + return count; +} + +static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show, + picolcd_fb_update_rate_store); + +/* initialize Framebuffer device */ +int picolcd_init_framebuffer(struct picolcd_data *data) +{ + struct device *dev = &data->hdev->dev; + struct fb_info *info = NULL; + int i, error = -ENOMEM; + u8 *fb_vbitmap = NULL; + u8 *fb_bitmap = NULL; + u32 *palette; + + fb_bitmap = vmalloc(PICOLCDFB_SIZE*8); + if (fb_bitmap == NULL) { + dev_err(dev, "can't get a free page for framebuffer\n"); + goto err_nomem; + } + + fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL); + if (fb_vbitmap == NULL) { + dev_err(dev, "can't alloc vbitmap image buffer\n"); + goto err_nomem; + } + + data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; + data->fb_defio = picolcd_fb_defio; + /* The extra memory is: + * - struct picolcd_fb_cleanup_item + * - u32 for ref_count + * - 256*u32 for pseudo_palette + */ + info = framebuffer_alloc(257 * sizeof(u32) + sizeof(struct picolcd_fb_cleanup_item), dev); + if (info == NULL) { + dev_err(dev, "failed to allocate a framebuffer\n"); + goto err_nomem; + } + + palette = info->par + sizeof(struct picolcd_fb_cleanup_item); + *palette = 1; + palette++; + for (i = 0; i < 256; i++) + palette[i] = i > 0 && i < 16 ? 0xff : 0; + info->pseudo_palette = palette; + info->fbdefio = &data->fb_defio; + info->screen_base = (char __force __iomem *)fb_bitmap; + info->fbops = &picolcdfb_ops; + info->var = picolcdfb_var; + info->fix = picolcdfb_fix; + info->fix.smem_len = PICOLCDFB_SIZE*8; + info->fix.smem_start = (unsigned long)fb_bitmap; + info->par = data; + info->flags = FBINFO_FLAG_DEFAULT; + + data->fb_vbitmap = fb_vbitmap; + data->fb_bitmap = fb_bitmap; + data->fb_bpp = picolcdfb_var.bits_per_pixel; + error = picolcd_fb_reset(data, 1); + if (error) { + dev_err(dev, "failed to configure display\n"); + goto err_cleanup; + } + error = device_create_file(dev, &dev_attr_fb_update_rate); + if (error) { + dev_err(dev, "failed to create sysfs attributes\n"); + goto err_cleanup; + } + fb_deferred_io_init(info); + data->fb_info = info; + error = register_framebuffer(info); + if (error) { + dev_err(dev, "failed to register framebuffer\n"); + goto err_sysfs; + } + /* schedule first output of framebuffer */ + data->fb_force = 1; + schedule_delayed_work(&info->deferred_work, 0); + return 0; + +err_sysfs: + fb_deferred_io_cleanup(info); + device_remove_file(dev, &dev_attr_fb_update_rate); +err_cleanup: + data->fb_vbitmap = NULL; + data->fb_bitmap = NULL; + data->fb_bpp = 0; + data->fb_info = NULL; + +err_nomem: + framebuffer_release(info); + vfree(fb_bitmap); + kfree(fb_vbitmap); + return error; +} + +void picolcd_exit_framebuffer(struct picolcd_data *data) +{ + struct fb_info *info = data->fb_info; + u8 *fb_vbitmap = data->fb_vbitmap; + + if (!info) + return; + + device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); + unregister_framebuffer(info); + data->fb_vbitmap = NULL; + data->fb_bitmap = NULL; + data->fb_bpp = 0; + data->fb_info = NULL; + kfree(fb_vbitmap); +} + +void picolcd_fb_unload() +{ + flush_work_sync(&picolcd_fb_cleanup); + WARN_ON(fb_pending); +} diff --git a/drivers/hid/hid-picolcd_lcd.c b/drivers/hid/hid-picolcd_lcd.c new file mode 100644 index 0000000..64a067f --- /dev/null +++ b/drivers/hid/hid-picolcd_lcd.c @@ -0,0 +1,106 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/lcd.h> + +#include "hid-picolcd.h" + +/* + * lcd class device + */ +static int picolcd_get_contrast(struct lcd_device *ldev) +{ + struct picolcd_data *data = lcd_get_data(ldev); + return data->lcd_contrast; +} + +static int picolcd_set_contrast(struct lcd_device *ldev, int contrast) +{ + struct picolcd_data *data = lcd_get_data(ldev); + struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev); + unsigned long flags; + + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return -ENODEV; + + data->lcd_contrast = contrast & 0x0ff; + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->lcd_contrast); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); + return 0; +} + +static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb) +{ + return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev)); +} + +static struct lcd_ops picolcd_lcdops = { + .get_contrast = picolcd_get_contrast, + .set_contrast = picolcd_set_contrast, + .check_fb = picolcd_check_lcd_fb, +}; + +int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct lcd_device *ldev; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported CONTRAST report"); + return -EINVAL; + } + + ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops); + if (IS_ERR(ldev)) { + dev_err(dev, "failed to register LCD\n"); + return PTR_ERR(ldev); + } + ldev->props.max_contrast = 0x0ff; + data->lcd_contrast = 0xe5; + data->lcd = ldev; + picolcd_set_contrast(ldev, 0xe5); + return 0; +} + +void picolcd_exit_lcd(struct picolcd_data *data) +{ + struct lcd_device *ldev = data->lcd; + + data->lcd = NULL; + if (ldev) + lcd_device_unregister(ldev); +} + +int picolcd_resume_lcd(struct picolcd_data *data) +{ + if (!data->lcd) + return 0; + return picolcd_set_contrast(data->lcd, data->lcd_contrast); +} + diff --git a/drivers/hid/hid-picolcd_leds.c b/drivers/hid/hid-picolcd_leds.c new file mode 100644 index 0000000..9249c06 --- /dev/null +++ b/drivers/hid/hid-picolcd_leds.c @@ -0,0 +1,172 @@ +/*************************************************************************** + * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@xxxxxxxxxxxxxxxxx> * + * * + * Based on Logitech G13 driver (v0.4) * + * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@xxxxxxxxxxx> * + * * + * This program is free software: you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation, version 2 of the License. * + * * + * This driver is distributed in the hope that it will be useful, but * + * WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * + * General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this software. If not see <http://www.gnu.org/licenses/>. * + ***************************************************************************/ + +#include <linux/hid.h> +#include <linux/hid-debug.h> +#include <linux/input.h> +#include "hid-ids.h" +#include "usbhid/usbhid.h" +#include <linux/usb.h> + +#include <linux/fb.h> +#include <linux/vmalloc.h> +#include <linux/backlight.h> +#include <linux/lcd.h> + +#include <linux/leds.h> + +#include <linux/seq_file.h> +#include <linux/debugfs.h> + +#include <linux/completion.h> +#include <linux/uaccess.h> +#include <linux/module.h> + +#include "hid-picolcd.h" + + +void picolcd_leds_set(struct picolcd_data *data) +{ + struct hid_report *report; + unsigned long flags; + + if (!data->led[0]) + return; + report = picolcd_out_report(REPORT_LED_STATE, data->hdev); + if (!report || report->maxfield != 1 || report->field[0]->report_count != 1) + return; + + spin_lock_irqsave(&data->lock, flags); + hid_set_field(report->field[0], 0, data->led_state); + usbhid_submit_report(data->hdev, report, USB_DIR_OUT); + spin_unlock_irqrestore(&data->lock, flags); +} + +static void picolcd_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, state = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + for (i = 0; i < 8; i++) { + if (led_cdev != data->led[i]) + continue; + state = (data->led_state >> i) & 1; + if (value == LED_OFF && state) { + data->led_state &= ~(1 << i); + picolcd_leds_set(data); + } else if (value != LED_OFF && !state) { + data->led_state |= 1 << i; + picolcd_leds_set(data); + } + break; + } +} + +static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev) +{ + struct device *dev; + struct hid_device *hdev; + struct picolcd_data *data; + int i, value = 0; + + dev = led_cdev->dev->parent; + hdev = container_of(dev, struct hid_device, dev); + data = hid_get_drvdata(hdev); + for (i = 0; i < 8; i++) + if (led_cdev == data->led[i]) { + value = (data->led_state >> i) & 1; + break; + } + return value ? LED_FULL : LED_OFF; +} + +int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report) +{ + struct device *dev = &data->hdev->dev; + struct led_classdev *led; + size_t name_sz = strlen(dev_name(dev)) + 8; + char *name; + int i, ret = 0; + + if (!report) + return -ENODEV; + if (report->maxfield != 1 || report->field[0]->report_count != 1 || + report->field[0]->report_size != 8) { + dev_err(dev, "unsupported LED_STATE report"); + return -EINVAL; + } + + for (i = 0; i < 8; i++) { + led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL); + if (!led) { + dev_err(dev, "can't allocate memory for LED %d\n", i); + ret = -ENOMEM; + goto err; + } + name = (void *)(&led[1]); + snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 1; + led->brightness_get = picolcd_led_get_brightness; + led->brightness_set = picolcd_led_set_brightness; + + data->led[i] = led; + ret = led_classdev_register(dev, data->led[i]); + if (ret) { + data->led[i] = NULL; + kfree(led); + dev_err(dev, "can't register LED %d\n", i); + goto err; + } + } + return 0; +err: + for (i = 0; i < 8; i++) + if (data->led[i]) { + led = data->led[i]; + data->led[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + return ret; +} + +void picolcd_exit_leds(struct picolcd_data *data) +{ + struct led_classdev *led; + int i; + + for (i = 0; i < 8; i++) { + led = data->led[i]; + data->led[i] = NULL; + if (!led) + continue; + led_classdev_unregister(led); + kfree(led); + } +} + + -- 1.7.8.6 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
