On Thu, Jul 19, 2012 at 05:36:12PM +0200, Daniel Mack wrote: > On 17.07.2012 14:59, Daniel Mack wrote: > > On 13.07.2012 09:01, Dmitry Torokhov wrote: > >> On Wed, May 02, 2012 at 09:36:51PM -0700, Dmitry Torokhov wrote: > >>> Hi Sven, > >>> > >>> On Sat, Apr 07, 2012 at 08:38:33PM +0200, Sven Neumann wrote: > >>>> Hi, > >>>> > >>>> On 07.04.12 09:02, Dmitry Torokhov wrote: > >>>>> On Fri, Apr 06, 2012 at 10:40:07PM -0700, Olof Johansson wrote: > >>>>>> This seems to have been broken since 2010, so obviously noone actually > >>>>>> cares about the driver: > >>>>>> > >>>>>> make[4]: *** [drivers/input/touchscreen/eeti_ts.o] Error 1 > >>>>>> drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active': > >>>>>> drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] > >>>>>> > >>>>>> irq_to_gpio isn't available on most platforms today, so the driver > >>>>>> will need some rework by someone who has hardware access and can test > >>>>>> (to make sure that, for example, switching to level interrupts and just > >>>>>> keep taking them while there's more to process works). > >>>>>> > >>>>>> I guess it could just be scheduled for removal, but let's start with > >>>>>> marking it CONFIG_BROKEN. > >>>>> > >>>>> Well, it probably works quite well on arches that do have irq_to_gpio(), > >>>>> let's ask Daniel and Sven if they still have this hardware and if they > >>>>> can try the patch below that implements what you suggested. > >>>> > >>>> This hardware is still in use and we also still follow kernel > >>>> development and try to update our customer devices to recent kernel > >>>> versions regularly. Currently we are at 3.1.10 and the touchscreen > >>>> works well with that. I'll try to update to a more recent kernel > >>>> next week and will try your patch. > >>>> > >>> > >>> Did you have a chance to test the patch? > >> > >> *ping* > >> > >> It would be nice to get driver in mainline compile [and work] again... > > > > We gave that patch a quick try today and it doesn't seem to work. We > > don't get any events from the touch screen anymore. We need to debug > > this further, hopefully by the end of this week. > > > > If there's anything obvious in the setup of the threaded IRQ handler, > > please let us know. Otherwise, I'll get back once I have a fixed version > > of the patch. > > Ok, finally I found some time. In general, the patch works fine. The > only detail I had to amend was the irqflags, which were changed from > IRQF_TRIGGER_RISING/IRQF_TRIGGER_FALLING to > IRQF_TRIGGER_HIGH/IRQF_TRIGGER_LOW, which doesn't work as the PXA can't > deal with level-based IRQs. Changing this back to RISING/FALLING makes > the driver work again. Hmm, but that would mean we need to restore reading the data in open() to make sure we re-arm IRQ in case somebody touched the screen before it was opened by userspace... Thanks. -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
