This is a initial driver for new touchscreen chip mms114 of MELFAS.
It uses I2C interface and supports 10 multi touch.
Signed-off-by: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
Changelog
from v1:
- Remove mutex and use one i2c_transfer() to read registers
- Use input_mt_report_pointer_emulation() and optimized input report
- Add ABS_MT_PRESSURE report
- Add core regulator control
from v2:
- Use BUG() when try to read MMS114_MODE_CONTROL
- Move i2c delay code
- Remove too much initialzation in declaration in mms114_proc_mt()
- Fix packet size check
- Use "error" instead of "ret"
- Add open and close function including regulator configuration
- Use module_i2c_driver()
from v3:
- Use check input_dev->users in PM functions
from v4:
- Modify MMS114_PACKET_NUM to 8 for latest firmware
- Define struct mms114_touch
- Some code clean
from v5:
- Remove mutex and enabled of struct mms114_data
- Move enabling/disabling IRQ and cfg_pin into start/stop
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/mms114.c | 546 ++++++++++++++++++++++++++++++++++++
include/linux/i2c/mms114.h | 24 ++
4 files changed, 583 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/mms114.c
create mode 100644 include/linux/i2c/mms114.h
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 98d2635..73bd2f6 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -369,6 +369,18 @@ config TOUCHSCREEN_MCS5000
To compile this driver as a module, choose M here: the
module will be called mcs5000_ts.
+config TOUCHSCREEN_MMS114
+ tristate "MELFAS MMS114 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MMS114 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mms114.
+
config TOUCHSCREEN_MTOUCH
tristate "MicroTouch serial touchscreens"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index eb8bfe1..8215d24 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o
obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
new file mode 100644
index 0000000..0f9dfeb
--- /dev/null
+++ b/drivers/input/touchscreen/mms114.c
@@ -0,0 +1,546 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mms114.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Write only registers */
+#define MMS114_MODE_CONTROL 0x01
+#define MMS114_OPERATION_MODE_MASK 0xE
+#define MMS114_ACTIVE (1 << 1)
+
+#define MMS114_XY_RESOLUTION_H 0x02
+#define MMS114_X_RESOLUTION 0x03
+#define MMS114_Y_RESOLUTION 0x04
+#define MMS114_CONTACT_THRESHOLD 0x05
+#define MMS114_MOVING_THRESHOLD 0x06
+
+/* Read only registers */
+#define MMS114_PACKET_SIZE 0x0F
+#define MMS114_INFOMATION 0x10
+#define MMS114_TSP_REV 0xF0
+
+/* Minimum delay time is 50us between stop and start signal of i2c */
+#define MMS114_I2C_DELAY 50
+
+/* 200ms needs after power on */
+#define MMS114_POWERON_DELAY 200
+
+/* Touchscreen absolute values */
+#define MMS114_MAX_AREA 0xff
+
+#define MMS114_MAX_TOUCH 10
+#define MMS114_PACKET_NUM 8
+
+/* Touch type */
+#define MMS114_TYPE_NONE 0
+#define MMS114_TYPE_TOUCHSCREEN 1
+#define MMS114_TYPE_TOUCHKEY 2
+
+struct mms114_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct regulator *core_reg;
+ struct regulator *io_reg;
+ const struct mms114_platform_data *pdata;
+
+ /* Use cache data for mode control register(write only) */
+ u8 cache_mode_control;
+};
+
+struct mms114_touch {
+ u8 id:4, reserved_bit4:1, type:2, pressed:1;
+ u8 x_hi:4, y_hi:4;
+ u8 x_lo;
+ u8 y_lo;
+ u8 width;
+ u8 strength;
+ u8 reserved[2];
+} __packed;
+
+static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
+ unsigned int len, u8 *val)
+{
+ struct i2c_client *client = data->client;
+ struct i2c_msg xfer[2];
+ u8 buf = reg & 0xff;
+ int error;
+
+ if ((reg <= MMS114_MODE_CONTROL) && (reg + len > MMS114_MODE_CONTROL)) {
+ BUG();
+ return -EINVAL;
+ }
+
+ /* Write register: use repeated start */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
+ xfer[0].len = 1;
+ xfer[0].buf = &buf;
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = len;
+ xfer[1].buf = val;
+
+ error = i2c_transfer(client->adapter, xfer, 2);
+ if (error != 2) {
+ dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+ __func__, error);
+ return error < 0 ? error : -EIO;
+ }
+ udelay(MMS114_I2C_DELAY);
+
+ return 0;
+}
+
+static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
+{
+ u8 val;
+ int error;
+
+ if (reg == MMS114_MODE_CONTROL)
+ return data->cache_mode_control;
+
+ error = __mms114_read_reg(data, reg, 1, &val);
+ return error < 0 ? error : val;
+}
+
+static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
+ unsigned int val)
+{
+ struct i2c_client *client = data->client;
+ u8 buf[2];
+ int error;
+
+ buf[0] = reg & 0xff;
+ buf[1] = val & 0xff;
+
+ error = i2c_master_send(client, buf, 2);
+ if (error != 2) {
+ dev_err(&client->dev, "%s, i2c send failed (%d)\n", __func__,
+ error);
+ return error < 0 ? error : -EIO;
+ }
+ udelay(MMS114_I2C_DELAY);
+
+ if (reg == MMS114_MODE_CONTROL)
+ data->cache_mode_control = val;
+
+ return 0;
+}
+
+static void mms114_proc_mt(struct mms114_data *data, struct mms114_touch *touch)
+{
+ const struct mms114_platform_data *pdata = data->pdata;
+ struct i2c_client *client = data->client;
+ struct input_dev *input_dev = data->input_dev;
+ unsigned int id;
+ unsigned int x;
+ unsigned int y;
+
+ if (touch->id > MMS114_MAX_TOUCH) {
+ dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
+ return;
+ }
+
+ if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
+ dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
+ return;
+ }
+
+ id = touch->id - 1;
+ x = touch->x_lo | touch->x_hi << 8;
+ y = touch->y_lo | touch->y_hi << 8;
+ if (x > pdata->x_size || y > pdata->y_size) {
+ dev_err(&client->dev, "Wrong touch coordinates (%d, %d)\n",
+ x, y);
+ return;
+ }
+
+ if (pdata->x_invert)
+ x = pdata->x_size - x;
+ if (pdata->y_invert)
+ y = pdata->y_size - y;
+
+ dev_dbg(&client->dev, "id: %d, type: %d, pressed: %d\n",
+ id, touch->type, touch->pressed);
+ dev_dbg(&client->dev, "x: %d, y: %d, width: %d, strength: %d\n",
+ x, y, touch->width, touch->strength);
+
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
+
+ if (touch->pressed) {
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
+ }
+}
+
+static irqreturn_t mms114_interrupt(int irq, void *dev_id)
+{
+ struct mms114_data *data = dev_id;
+ struct input_dev *input_dev = data->input_dev;
+ struct mms114_touch touch[MMS114_MAX_TOUCH];
+ int packet_size;
+ int touch_size;
+ int index;
+ int error;
+
+ mutex_lock(&input_dev->mutex);
+ if (!input_dev->users) {
+ mutex_unlock(&input_dev->mutex);
+ goto out;
+ }
+ mutex_unlock(&input_dev->mutex);
+
+ packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
+ if (packet_size <= 0)
+ goto out;
+
+ touch_size = packet_size / MMS114_PACKET_NUM;
+
+ error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size,
+ (u8 *)touch);
+ if (error < 0)
+ goto out;
+
+ for (index = 0; index < touch_size; index++)
+ mms114_proc_mt(data, touch + index);
+
+ input_mt_report_pointer_emulation(data->input_dev, true);
+ input_sync(data->input_dev);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int mms114_set_active(struct mms114_data *data, bool active)
+{
+ int val;
+
+ val = mms114_read_reg(data, MMS114_MODE_CONTROL);
+ if (val < 0)
+ return val;
+
+ val &= ~MMS114_OPERATION_MODE_MASK;
+
+ /* If active is false, sleep mode */
+ if (active)
+ val |= MMS114_ACTIVE;
+
+ return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
+}
+
+static int mms114_get_version(struct mms114_data *data)
+{
+ struct device *dev = &data->client->dev;
+ u8 buf[6];
+ int error;
+
+ error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
+ if (error < 0)
+ return error;
+
+ dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
+ buf[0], buf[1], buf[3]);
+
+ return 0;
+}
+
+static int mms114_setup_regs(struct mms114_data *data)
+{
+ const struct mms114_platform_data *pdata = data->pdata;
+ int val;
+ int error;
+
+ error = mms114_get_version(data);
+ if (error < 0)
+ return error;
+
+ error = mms114_set_active(data, true);
+ if (error < 0)
+ return error;
+
+ val = (pdata->x_size >> 8) & 0xf;
+ val |= ((pdata->y_size >> 8) & 0xf) << 4;
+ error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
+ if (error < 0)
+ return error;
+
+ val = pdata->x_size & 0xff;
+ error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
+ if (error < 0)
+ return error;
+
+ val = pdata->y_size & 0xff;
+ error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
+ if (error < 0)
+ return error;
+
+ if (pdata->contact_threshold) {
+ error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
+ pdata->contact_threshold);
+ if (error < 0)
+ return error;
+ }
+
+ if (pdata->moving_threshold) {
+ error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
+ pdata->moving_threshold);
+ if (error < 0)
+ return error;
+ }
+
+ return 0;
+}
+
+static int mms114_start(struct mms114_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+
+ if (data->core_reg)
+ regulator_enable(data->core_reg);
+ if (data->io_reg)
+ regulator_enable(data->io_reg);
+ mdelay(MMS114_POWERON_DELAY);
+
+ error = mms114_setup_regs(data);
+ if (error < 0)
+ return error;
+
+ if (data->pdata->cfg_pin)
+ data->pdata->cfg_pin(true);
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static void mms114_stop(struct mms114_data *data)
+{
+ struct i2c_client *client = data->client;
+
+ disable_irq(client->irq);
+
+ if (data->pdata->cfg_pin)
+ data->pdata->cfg_pin(false);
+
+ if (data->io_reg)
+ regulator_disable(data->io_reg);
+ if (data->core_reg)
+ regulator_disable(data->core_reg);
+}
+
+static int mms114_input_open(struct input_dev *dev)
+{
+ struct mms114_data *data = input_get_drvdata(dev);
+
+ return mms114_start(data);
+}
+
+static void mms114_input_close(struct input_dev *dev)
+{
+ struct mms114_data *data = input_get_drvdata(dev);
+
+ mms114_stop(data);
+}
+
+static int __devinit mms114_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mms114_data *data;
+ struct input_dev *input_dev;
+ int error;
+
+ if (!client->dev.platform_data) {
+ dev_err(&client->dev, "Need platform data\n");
+ return -EINVAL;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_PROTOCOL_MANGLING)) {
+ dev_err(&client->dev,
+ "Need i2c bus that supports protocol mangling\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(struct mms114_data), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!data || !input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ data->client = client;
+ data->input_dev = input_dev;
+ data->pdata = client->dev.platform_data;
+
+ input_dev->name = "MELPAS MMS114 Touchscreen";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+ input_dev->open = mms114_input_open;
+ input_dev->close = mms114_input_close;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0);
+
+ /* For multi touch */
+ input_mt_init_slots(input_dev, MMS114_MAX_TOUCH);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, MMS114_MAX_AREA, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, data->pdata->x_size, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, data->pdata->y_size, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+ input_set_drvdata(input_dev, data);
+ i2c_set_clientdata(client, data);
+
+ data->core_reg = regulator_get(&client->dev, "avdd");
+ if (IS_ERR(data->core_reg)) {
+ error = PTR_ERR(data->core_reg);
+ dev_err(&client->dev, "Unable to get the Core regulator (%d)\n",
+ error);
+ goto err_free_mem;
+ }
+
+ data->io_reg = regulator_get(&client->dev, "vdd");
+ if (IS_ERR(data->io_reg)) {
+ error = PTR_ERR(data->io_reg);
+ dev_err(&client->dev, "Unable to get the IO regulator (%d)\n",
+ error);
+ goto err_core_reg;
+ }
+
+ error = request_threaded_irq(client->irq, NULL, mms114_interrupt,
+ IRQF_TRIGGER_FALLING, "mms114", data);
+ if (error < 0) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_io_reg;
+ }
+ disable_irq(client->irq);
+
+ error = input_register_device(data->input_dev);
+ if (error < 0)
+ goto err_free_irq;
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, data);
+err_io_reg:
+ regulator_put(data->io_reg);
+err_core_reg:
+ regulator_put(data->core_reg);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(data);
+ return error;
+}
+
+static int __devexit mms114_remove(struct i2c_client *client)
+{
+ struct mms114_data *data = i2c_get_clientdata(client);
+
+ free_irq(client->irq, data);
+ regulator_put(data->io_reg);
+ regulator_put(data->core_reg);
+ input_unregister_device(data->input_dev);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mms114_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mms114_data *data = i2c_get_clientdata(client);
+ struct input_dev *input_dev = data->input_dev;
+ int id;
+
+ /* Release all touch */
+ for (id = 0; id < MMS114_MAX_TOUCH; id++) {
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
+ }
+
+ input_mt_report_pointer_emulation(input_dev, true);
+ input_sync(input_dev);
+
+ mutex_lock(&input_dev->mutex);
+ if (input_dev->users)
+ mms114_stop(data);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static int mms114_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mms114_data *data = i2c_get_clientdata(client);
+ struct input_dev *input_dev = data->input_dev;
+ int error;
+
+ mutex_lock(&input_dev->mutex);
+ if (input_dev->users) {
+ error = mms114_start(data);
+ if (error < 0) {
+ mutex_unlock(&input_dev->mutex);
+ return error;
+ }
+ }
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
+
+static const struct i2c_device_id mms114_id[] = {
+ { "mms114", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mms114_id);
+
+static struct i2c_driver mms114_driver = {
+ .driver = {
+ .name = "mms114",
+ .owner = THIS_MODULE,
+ .pm = &mms114_pm_ops,
+ },
+ .probe = mms114_probe,
+ .remove = __devexit_p(mms114_remove),
+ .id_table = mms114_id,
+};
+
+module_i2c_driver(mms114_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c/mms114.h b/include/linux/i2c/mms114.h
new file mode 100644
index 0000000..5722ebf
--- /dev/null
+++ b/include/linux/i2c/mms114.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#ifndef __LINUX_MMS114_H
+#define __LINUX_MMS114_H
+
+struct mms114_platform_data {
+ unsigned int x_size;
+ unsigned int y_size;
+ unsigned int contact_threshold;
+ unsigned int moving_threshold;
+ bool x_invert;
+ bool y_invert;
+
+ void (*cfg_pin)(bool);
+};
+
+#endif /* __LINUX_MMS114_H */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
