This commit adds support for the Semtech SX8634 Capacitive Button and
Slider Touch controller.
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/input/sx8634.txt | 58 ++
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sx8634.c | 745 ++++++++++++++++++++
include/linux/input/sx8634.h | 32 +
5 files changed, 846 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/sx8634.txt
create mode 100644 drivers/input/misc/sx8634.c
create mode 100644 include/linux/input/sx8634.h
diff --git a/Documentation/devicetree/bindings/input/sx8634.txt b/Documentation/devicetree/bindings/input/sx8634.txt
new file mode 100644
index 0000000..149da9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sx8634.txt
@@ -0,0 +1,58 @@
+Semtech SX8634 Capacitive Button and Slider Touch Controller
+
+The SX8634 controller is configured with the following properties:
+
+ Required properties:
+ - compatible: "sx,sx8634"
+ - reg: I2C bus address of the device
+ - interrupts: interrupt number of the device
+ - #address-cells: must be <1>
+ - #size-cells: must be <0>
+
+ Optional Properties:
+ - threshold: number of ticks required to detect a touch/release
+ - range: 0x00 to 0xff
+ - default: 0xa0
+ - sensitivity: sensitivity of the sensors
+ - range: 0x0 to 0x7
+ - default: 0x0
+
+Each capacitive sensor is configured via a separate sub-node:
+
+ Required Properties:
+ - reg: sensor index
+ - label: name of the sensor
+ - linux,code: Keycode to emit for buttons. If absent, the capacitive sensor
+ is part of the slider element.
+
+ Optional Properties:
+ - threshold: overrides the global threshold setting
+ - sensitivity: overrides the global sensitivity setting
+
+Example:
+
+ keypad: sx8634@2b {
+ compatible = "sx,sx8634";
+ reg = <0x2b>;
+
+ interrupt-parent = <&gpioext>;
+ interrupts = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ threshold = <0xa0>;
+ sensitivity = <7>;
+
+ cap@1 {
+ reg = <1>;
+ label = "Up";
+ linux,code = <103>; /* KEY_UP */
+ };
+
+ cap@2 {
+ reg = <2>;
+ label = "Down";
+ linux,code = <108>; /* KEY_DOWN */
+ };
+ };
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 2d78779..00815f5 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -578,6 +578,16 @@ config INPUT_CMA3000_I2C
To compile this driver as a module, choose M here: the
module will be called cma3000_d0x_i2c.
+config INPUT_SX8634
+ tristate "Semtech SX8634"
+ depends on I2C
+ default n
+ help
+ Say Y here if you want to use the Semtech SX8634 controller.
+
+ To compile this driver as a module, choose M here: the module will
+ be called sx8634.
+
config INPUT_XEN_KBDDEV_FRONTEND
tristate "Xen virtual keyboard and mouse support"
depends on XEN
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f55cdf4..7a86fac 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -53,5 +53,6 @@ obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
+obj-$(CONFIG_INPUT_SX8634) += sx8634.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
diff --git a/drivers/input/misc/sx8634.c b/drivers/input/misc/sx8634.c
new file mode 100644
index 0000000..4241bdd
--- /dev/null
+++ b/drivers/input/misc/sx8634.c
@@ -0,0 +1,745 @@
+/*
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+#include <linux/input/sx8634.h>
+
+#define I2C_IRQ_SRC 0x00
+#define I2C_IRQ_SRC_MODE (1 << 0)
+#define I2C_IRQ_SRC_COMPENSATION (1 << 1)
+#define I2C_IRQ_SRC_BUTTONS (1 << 2)
+#define I2C_IRQ_SRC_SLIDER (1 << 3)
+#define I2C_IRQ_SRC_GPI (1 << 4)
+#define I2C_IRQ_SRC_SPM (1 << 5)
+#define I2C_IRQ_SRC_NVM (1 << 6)
+#define I2C_IRQ_SRC_READY (1 << 7)
+
+#define I2C_CAP_STAT_MSB 0x01
+#define I2C_CAP_STAT_LSB 0x02
+#define I2C_SLD_POS_MSB 0x03
+#define I2C_SLD_POS_LSB 0x04
+#define I2C_GPI_STAT 0x07
+#define I2C_SPM_STAT 0x08
+#define I2C_COMP_OP_MODE 0x09
+#define I2C_GPO_CTRL 0x0a
+#define I2C_GPP_PIN_ID 0x0b
+#define I2C_GPP_INTENSITY 0x0c
+#define I2C_SPM_CFG 0x0d
+#define I2C_SPM_CFG_WRITE (0 << 3)
+#define I2C_SPM_CFG_READ (1 << 3)
+#define I2C_SPM_CFG_OFF (0 << 4)
+#define I2C_SPM_CFG_ON (1 << 4)
+#define I2C_SPM_BASE 0x0e
+#define I2C_SPM_KEY_MSB 0xac
+#define I2C_SPM_KEY_LSB 0xad
+#define I2C_SOFT_RESET 0xb1
+
+#define SPM_CFG 0x00
+#define SPM_CAP_MODE_MISC 0x09
+
+#define SPM_CAP_MODE(x) (((x) <= 3) ? 0x0c : (((x) <= 7) ? 0x0b : 0x0a))
+#define SPM_CAP_MODE_SHIFT(x) (((x) & 3) * 2)
+#define SPM_CAP_MODE_MASK 0x3
+#define SPM_CAP_MODE_MASK_SHIFTED(x) (SPM_CAP_MODE_MASK << SPM_CAP_MODE_SHIFT(x))
+
+#define SPM_CAP_SENS(x) (0x0d + ((x) / 2))
+#define SPM_CAP_SENS_MAX 0x7
+#define SPM_CAP_SENS_SHIFT(x) (((x) & 1) ? 0 : 4)
+#define SPM_CAP_SENS_MASK 0x7
+#define SPM_CAP_SENS_MASK_SHIFTED(x) (SPM_CAP_SENS_MASK << SPM_CAP_SENS_SHIFT(x))
+
+#define SPM_CAP_THRESHOLD(x) (0x13 + (x))
+#define SPM_CAP_THRESHOLD_MAX 0xff
+
+#define SPM_BLOCK_SIZE 8
+#define SPM_NUM_BLOCKS 16
+#define SPM_SIZE (SPM_BLOCK_SIZE * SPM_NUM_BLOCKS)
+
+#define SLD_POS_STEP 12
+
+struct sx8634 {
+ struct i2c_client *client;
+ struct input_dev *input;
+ unsigned short keycodes[SX8634_NUM_CAPS];
+ unsigned long spm_dirty;
+ u8 *spm_cache;
+ u16 slider_max;
+ u16 status;
+};
+
+static int spm_wait(struct i2c_client *client)
+{
+ unsigned int retries = 32;
+ int err;
+
+ do {
+ err = i2c_smbus_read_byte_data(client, I2C_IRQ_SRC);
+ if (err < 0)
+ return err;
+
+ if (err & I2C_IRQ_SRC_SPM)
+ break;
+
+ msleep(10);
+ } while (--retries);
+
+ return retries ? 0 : -ETIMEDOUT;
+}
+
+static ssize_t spm_read_block(struct i2c_client *client, loff_t offset,
+ void *buffer, size_t size)
+{
+ u8 enable = I2C_SPM_CFG_ON | I2C_SPM_CFG_READ;
+ int err;
+
+ BUG_ON(size < SPM_BLOCK_SIZE);
+ BUG_ON((offset & 7) != 0);
+
+ err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, enable);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(client, I2C_SPM_BASE, offset);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_read_i2c_block_data(client, 0, SPM_BLOCK_SIZE, buffer);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, I2C_SPM_CFG_OFF);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static ssize_t spm_write_block(struct i2c_client *client, loff_t offset,
+ const void *buffer, size_t size)
+{
+ u8 enable = I2C_SPM_CFG_ON | I2C_SPM_CFG_WRITE;
+ int err;
+
+ BUG_ON(size < SPM_BLOCK_SIZE);
+ BUG_ON((offset & 7) != 0);
+
+ err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, enable);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(client, I2C_SPM_BASE, offset);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_i2c_block_data(client, 0, SPM_BLOCK_SIZE, buffer);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, I2C_SPM_CFG_OFF);
+ if (err < 0)
+ return err;
+
+ err = spm_wait(client);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static ssize_t sx8634_spm_load(struct sx8634 *sx)
+{
+ loff_t offset;
+ ssize_t err;
+
+ if (sx->spm_dirty != 0)
+ dev_warn(&sx->client->dev, "discarding modified SPM cache\n");
+
+ memset(sx->spm_cache, 0, SPM_SIZE);
+
+ for (offset = 0; offset < SPM_SIZE; offset += SPM_BLOCK_SIZE) {
+ err = spm_read_block(sx->client, offset,
+ sx->spm_cache + offset, SPM_BLOCK_SIZE);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "spm_read_block(): %d\n",
+ err);
+ return err;
+ }
+ }
+
+ sx->spm_dirty = 0;
+
+ return 0;
+}
+
+static ssize_t sx8634_spm_sync(struct sx8634 *sx)
+{
+ int bit;
+
+ for_each_set_bit(bit, &sx->spm_dirty, SPM_NUM_BLOCKS) {
+ loff_t offset = bit * SPM_BLOCK_SIZE;
+ ssize_t err;
+
+ err = spm_write_block(sx->client, offset,
+ sx->spm_cache + offset, SPM_BLOCK_SIZE);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "spm_write_block(): %d\n",
+ err);
+ return err;
+ }
+ }
+
+ sx->spm_dirty = 0;
+
+ return 0;
+}
+
+static int sx8634_spm_read(struct sx8634 *sx, unsigned int offset, u8 *value)
+{
+ if (offset >= SPM_SIZE)
+ return -ENXIO;
+
+ *value = sx->spm_cache[offset];
+
+ return 0;
+}
+
+static int sx8634_spm_write(struct sx8634 *sx, unsigned int offset, u8 value)
+{
+ if (offset >= SPM_SIZE)
+ return -ENXIO;
+
+ sx->spm_dirty |= BIT(offset / SPM_BLOCK_SIZE);
+ sx->spm_cache[offset] = value;
+
+ return 0;
+}
+
+static int sx8634_reset(struct sx8634 *sx)
+{
+ unsigned int retries = 32;
+ int err;
+
+ err = i2c_smbus_write_byte_data(sx->client, I2C_SOFT_RESET, 0xde);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(sx->client, I2C_SOFT_RESET, 0x00);
+ if (err < 0)
+ return err;
+
+ do {
+ err = i2c_smbus_read_byte_data(sx->client, I2C_IRQ_SRC);
+ if (err < 0)
+ return err;
+
+ if (err & I2C_IRQ_SRC_READY)
+ break;
+
+ msleep(10);
+ } while (--retries);
+
+ return retries ? 0 : -ETIMEDOUT;
+}
+
+static irqreturn_t sx8634_irq(int irq, void *data)
+{
+ struct sx8634 *sx = data;
+ bool need_sync = false;
+ u8 pending;
+ int err;
+
+ err = i2c_smbus_read_byte_data(sx->client, I2C_IRQ_SRC);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "failed to read IRQ source register: %d\n", err);
+ return IRQ_NONE;
+ }
+
+ pending = err;
+
+ if (pending & I2C_IRQ_SRC_COMPENSATION)
+ dev_dbg(&sx->client->dev, "compensation complete\n");
+
+ if (pending & I2C_IRQ_SRC_BUTTONS) {
+ unsigned long changed;
+ unsigned int cap;
+ u16 status;
+
+ err = i2c_smbus_read_byte_data(sx->client, I2C_CAP_STAT_MSB);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "failed to read MSB: %d\n", err);
+ return IRQ_NONE;
+ }
+
+ status = err << 8;
+
+ err = i2c_smbus_read_byte_data(sx->client, I2C_CAP_STAT_LSB);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "failed to read LSB: %d\n", err);
+ return IRQ_NONE;
+ }
+
+ status |= err;
+
+ changed = status ^ sx->status;
+
+ for_each_set_bit(cap, &changed, SX8634_NUM_CAPS) {
+ unsigned int level = (status & BIT(cap)) ? 1 : 0;
+ input_report_key(sx->input, sx->keycodes[cap], level);
+ need_sync = true;
+ }
+
+ sx->status = status;
+ }
+
+ if (pending & I2C_IRQ_SRC_SLIDER) {
+ u16 position;
+
+ err = i2c_smbus_read_byte_data(sx->client, I2C_SLD_POS_MSB);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "failed to read MSB: %d\n",
+ err);
+ return IRQ_NONE;
+ }
+
+ position = err << 8;
+
+ err = i2c_smbus_read_byte_data(sx->client, I2C_SLD_POS_LSB);
+ if (err < 0) {
+ dev_err(&sx->client->dev, "failed to read LSB: %d\n",
+ err);
+ return IRQ_NONE;
+ }
+
+ position |= err;
+
+ input_report_abs(sx->input, ABS_MISC, position);
+ }
+
+ if (need_sync || (pending & I2C_IRQ_SRC_SLIDER))
+ input_sync(sx->input);
+
+ if (pending & I2C_IRQ_SRC_GPI)
+ dev_dbg(&sx->client->dev, "%s(): GPI event\n", __func__);
+
+ if (pending & I2C_IRQ_SRC_SPM)
+ dev_dbg(&sx->client->dev, "%s(): SPM event\n", __func__);
+
+ if (pending & I2C_IRQ_SRC_NVM)
+ dev_dbg(&sx->client->dev, "%s(): NVM event\n", __func__);
+
+ if (pending & I2C_IRQ_SRC_READY)
+ dev_dbg(&sx->client->dev, "%s(): ready event\n", __func__);
+
+ return IRQ_HANDLED;
+}
+
+static int sx8634_set_mode(struct sx8634 *sx, unsigned int cap, enum sx8634_cap_mode mode)
+{
+ u8 value = 0;
+ int err;
+
+ if ((cap >= SX8634_NUM_CAPS) || (mode == SX8634_CAP_MODE_RESERVED))
+ return -EINVAL;
+
+ err = sx8634_spm_read(sx, SPM_CAP_MODE(cap), &value);
+ if (err < 0)
+ return err;
+
+ value &= ~SPM_CAP_MODE_MASK_SHIFTED(cap);
+ value |= (mode & SPM_CAP_MODE_MASK) << SPM_CAP_MODE_SHIFT(cap);
+
+ err = sx8634_spm_write(sx, SPM_CAP_MODE(cap), value);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int sx8634_set_sensitivity(struct sx8634 *sx, unsigned int cap,
+ u8 sensitivity)
+{
+ u8 value = 0;
+ int err = 0;
+
+ if (cap >= SX8634_NUM_CAPS)
+ return -EINVAL;
+
+ err = sx8634_spm_read(sx, SPM_CAP_SENS(cap), &value);
+ if (err < 0)
+ return err;
+
+ value &= ~SPM_CAP_SENS_MASK_SHIFTED(cap);
+ value |= (sensitivity & SPM_CAP_SENS_MASK) << SPM_CAP_SENS_SHIFT(cap);
+
+ err = sx8634_spm_write(sx, SPM_CAP_SENS(cap), value);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int sx8634_set_threshold(struct sx8634 *sx, unsigned int cap,
+ u8 threshold)
+{
+ int err;
+
+ if (cap >= SX8634_NUM_CAPS)
+ return -EINVAL;
+
+ err = sx8634_spm_write(sx, SPM_CAP_THRESHOLD(cap), threshold);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int sx8634_setup(struct sx8634 *sx, struct sx8634_platform_data *pdata)
+{
+ bool slider = false;
+ unsigned int i;
+ int err;
+
+ err = sx8634_reset(sx);
+ if (err < 0)
+ return err;
+
+ err = sx8634_spm_load(sx);
+ if (err < 0)
+ return err;
+
+ /* disable all capacitive sensors */
+ for (i = 0; i < SX8634_NUM_CAPS; i++) {
+ err = sx8634_set_mode(sx, i, SX8634_CAP_MODE_DISABLED);
+ if (err < 0)
+ return err;
+ }
+
+ err = sx8634_spm_sync(sx);
+ if (err < 0)
+ return err;
+
+ err = sx8634_spm_load(sx);
+ if (err < 0)
+ return err;
+
+ /* configure capacitive sensor parameters */
+ for (i = 0; i < SX8634_NUM_CAPS; i++) {
+ struct sx8634_cap *cap = &pdata->caps[i];
+
+ err = sx8634_set_sensitivity(sx, i, cap->sensitivity);
+ if (err < 0)
+ dev_err(&sx->client->dev, "%s failed: %d\n",
+ "sx8634_set_sensitivity()", err);
+
+ err = sx8634_set_threshold(sx, i, cap->threshold);
+ if (err < 0)
+ dev_err(&sx->client->dev, "%s failed: %d\n",
+ "sx8634_set_threshold()", err);
+ }
+
+ err = sx8634_spm_sync(sx);
+ if (err < 0)
+ return err;
+
+ err = sx8634_spm_load(sx);
+ if (err < 0)
+ return err;
+
+ /* enable individual cap sensitivity */
+ err = sx8634_spm_write(sx, SPM_CAP_MODE_MISC, 0x04);
+ if (err < 0)
+ return err;
+
+ /* enable capacitive sensors */
+ for (i = 0; i < SX8634_NUM_CAPS; i++) {
+ struct sx8634_cap *cap = &pdata->caps[i];
+
+ if (cap->mode == SX8634_CAP_MODE_BUTTON) {
+ input_set_capability(sx->input, EV_KEY, cap->keycode);
+ sx->keycodes[i] = cap->keycode;
+ }
+
+ if (cap->mode == SX8634_CAP_MODE_SLIDER) {
+ if (slider)
+ sx->slider_max += SLD_POS_STEP;
+
+ slider = true;
+ }
+
+ err = sx8634_set_mode(sx, i, cap->mode);
+ if (err < 0)
+ dev_err(&sx->client->dev, "%s failed: %d\n",
+ "sx8634_set_mode()", err);
+ }
+
+ err = sx8634_spm_sync(sx);
+ if (err < 0)
+ return err;
+
+ sx->input->id.bustype = BUS_I2C;
+ sx->input->id.product = 0;
+ sx->input->id.version = 0;
+ sx->input->name = "sx8634";
+ sx->input->dev.parent = &sx->client->dev;
+
+ /* setup slider */
+ if (slider) {
+ input_set_abs_params(sx->input, ABS_MISC, 0, sx->slider_max,
+ 0, 0);
+ input_set_capability(sx->input, EV_ABS, ABS_MISC);
+ }
+
+ return 0;
+}
+
+static ssize_t sx8634_spm_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sx8634 *sx = i2c_get_clientdata(client);
+ ssize_t len = 0;
+ size_t i, j;
+ int err;
+
+ err = sx8634_spm_load(sx);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < SPM_SIZE; i += SPM_BLOCK_SIZE) {
+ const char *prefix = "";
+
+ for (j = 0; j < SPM_BLOCK_SIZE; j++) {
+ len += sprintf(buf + len, "%s%02x", prefix,
+ sx->spm_cache[i + j]);
+ prefix = " ";
+ }
+
+ len += sprintf(buf + len, "\n");
+ }
+
+ return len;
+}
+
+static DEVICE_ATTR(spm, 0664, sx8634_spm_show, NULL);
+
+static struct attribute *sx8634_attributes[] = {
+ &dev_attr_spm.attr,
+ NULL
+};
+
+static const struct attribute_group sx8634_attr_group = {
+ .attrs = sx8634_attributes,
+};
+
+static int sx8634_parse_dt(struct device *dev, struct sx8634_platform_data *pdata)
+{
+ struct device_node *node = dev->of_node;
+ struct device_node *child = NULL;
+ u32 sensitivity_def = 0x00;
+ u32 threshold_def = 0xa0;
+ int err;
+
+ if (!node)
+ return -ENODEV;
+
+ memset(pdata, 0, sizeof(*pdata));
+
+ err = of_property_read_u32(node, "threshold", &threshold_def);
+ if (err < 0) {
+ }
+
+ if (threshold_def > SPM_CAP_THRESHOLD_MAX) {
+ dev_info(dev, "invalid threshold: %u, using %u\n",
+ threshold_def, SPM_CAP_THRESHOLD_MAX);
+ threshold_def = SPM_CAP_THRESHOLD_MAX;
+ }
+
+ err = of_property_read_u32(node, "sensitivity", &sensitivity_def);
+ if (err < 0) {
+ }
+
+ if (sensitivity_def > SPM_CAP_SENS_MAX) {
+ dev_info(dev, "invalid sensitivity: %u, using %u\n",
+ sensitivity_def, SPM_CAP_SENS_MAX);
+ sensitivity_def = SPM_CAP_SENS_MAX;
+ }
+
+ while ((child = of_get_next_child(node, child))) {
+ u32 sensitivity = sensitivity_def;
+ u32 threshold = threshold_def;
+ struct sx8634_cap *cap;
+ u32 keycode;
+ u32 index;
+
+ err = of_property_read_u32(child, "reg", &index);
+ if (err < 0) {
+ }
+
+ if (index >= SX8634_NUM_CAPS) {
+ dev_err(dev, "invalid cap index: %u\n", index);
+ continue;
+ }
+
+ cap = &pdata->caps[index];
+
+ err = of_property_read_u32(child, "threshold", &threshold);
+ if (err < 0) {
+ }
+
+ cap->threshold = threshold;
+
+ err = of_property_read_u32(child, "sensitivity", &sensitivity);
+ if (err < 0) {
+ }
+
+ cap->sensitivity = sensitivity;
+
+ err = of_property_read_u32(child, "linux,code", &keycode);
+ if (err == 0) {
+ cap->mode = SX8634_CAP_MODE_BUTTON;
+ cap->keycode = keycode;
+ } else {
+ cap->mode = SX8634_CAP_MODE_SLIDER;
+ }
+ }
+
+ return 0;
+}
+
+static int __devinit sx8634_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sx8634_platform_data *pdata = client->dev.platform_data;
+ struct device_node *node = client->dev.of_node;
+ struct sx8634_platform_data defpdata;
+ struct sx8634 *sx;
+ int err = 0;
+
+ if (IS_ENABLED(CONFIG_OF) && node) {
+ client->irq = irq_of_parse_and_map(node, 0);
+ if (client->irq == NO_IRQ)
+ return -EPROBE_DEFER;
+ }
+
+ if (!pdata) {
+ if (!IS_ENABLED(CONFIG_OF))
+ return -ENODEV;
+
+ err = sx8634_parse_dt(&client->dev, &defpdata);
+ if (err < 0)
+ return err;
+
+ pdata = &defpdata;
+ }
+
+ sx = devm_kzalloc(&client->dev, sizeof(*sx), GFP_KERNEL);
+ if (!sx)
+ return -ENOMEM;
+
+ sx->spm_cache = devm_kzalloc(&client->dev, SPM_SIZE, GFP_KERNEL);
+ if (!sx->spm_cache)
+ return -ENOMEM;
+
+ sx->input = input_allocate_device();
+ if (!sx->input)
+ return -ENOMEM;
+
+ sx->client = client;
+
+ err = sx8634_setup(sx, pdata);
+ if (err < 0)
+ goto free;
+
+ err = sysfs_create_group(&client->dev.kobj, &sx8634_attr_group);
+ if (err < 0)
+ goto free;
+
+ /* clear interrupts */
+ err = i2c_smbus_read_byte_data(client, I2C_IRQ_SRC);
+ if (err < 0) {
+ dev_err(&client->dev, "can't clear interrupts: %d\n", err);
+ goto remove_sysfs;
+ }
+
+ err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ sx8634_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "sx8634", sx);
+ if (err < 0) {
+ dev_err(&client->dev, "can't allocate IRQ#%d\n", client->irq);
+ goto remove_sysfs;
+ }
+
+ err = input_register_device(sx->input);
+ if (err < 0)
+ goto remove_sysfs;
+
+ i2c_set_clientdata(client, sx);
+
+ return 0;
+
+remove_sysfs:
+ sysfs_remove_group(&client->dev.kobj, &sx8634_attr_group);
+free:
+ input_free_device(sx->input);
+ return err;
+}
+
+static int __devexit sx8634_i2c_remove(struct i2c_client *client)
+{
+ struct sx8634 *sx = i2c_get_clientdata(client);
+
+ input_unregister_device(sx->input);
+ sysfs_remove_group(&client->dev.kobj, &sx8634_attr_group);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sx8634_i2c_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int sx8634_i2c_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sx8634_i2c_pm,
+ sx8634_i2c_suspend,
+ sx8634_i2c_resume);
+
+static const struct i2c_device_id sx8634_i2c_ids[] = {
+ { "sx8634", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sx8634_i2c_ids);
+
+static struct i2c_driver sx8634_driver = {
+ .driver = {
+ .name = "sx8634",
+ .owner = THIS_MODULE,
+ .pm = &sx8634_i2c_pm,
+ },
+ .probe = sx8634_i2c_probe,
+ .remove = __devexit_p(sx8634_i2c_remove),
+ .id_table = sx8634_i2c_ids,
+};
+module_i2c_driver(sx8634_driver);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Semtech SX8634 Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/input/sx8634.h b/include/linux/input/sx8634.h
new file mode 100644
index 0000000..1eb2f00
--- /dev/null
+++ b/include/linux/input/sx8634.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_INPUT_SX8634_H__
+#define __LINUX_INPUT_SX8634_H__
+
+#define SX8634_NUM_CAPS 12
+
+enum sx8634_cap_mode {
+ SX8634_CAP_MODE_DISABLED,
+ SX8634_CAP_MODE_BUTTON,
+ SX8634_CAP_MODE_SLIDER,
+ SX8634_CAP_MODE_RESERVED
+};
+
+struct sx8634_cap {
+ enum sx8634_cap_mode mode;
+ unsigned short keycode;
+ u8 sensitivity;
+ u8 threshold;
+};
+
+struct sx8634_platform_data {
+ struct sx8634_cap caps[SX8634_NUM_CAPS];
+};
+
+#endif
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
