Hi Lachlan, thanks for the feedback. The pid you provided is already included for 3.3, and has been scheduled in stable too (3.2 and 3.0). So this command won't be required soon. Cheers, Benjamin On Fri, Jan 20, 2012 at 22:57, Padfoot <padfoot@xxxxxxxxxxxxxx> wrote: > On 21/01/12 07:50, Benjamin Tissoires wrote: >> >> Hi Lachlan, >> >> Well, many eGalax devices are multitouch devices, and can not be >> handled by the generic input hid layer without having strange issues. >> We have a patch in 3.2 that auto detect such devices and release them >> from the generic input stack. >> Then, it's easier for people to handle the devices through >> hid-multitouch as the recompilation of the kernel is not required >> anymore. >> I also submitted a patch to catch multitouch devices in >> hid-multitouch, but it has not been accepted as it would require >> everybody to load hid-multitouch for every hid device. >> >> To enable your device, do (as root) >> # modprobe hid-multitouch >> # echo 3 VID PID 104> >> /sys/module/hid_multitouch/drivers/hid\:hid-multitouch/new_id >> >> where: >> - 3 is the bus, usb here >> - VID: vendor ID (must be 0eef in your case) >> - PID: product ID >> - 104 is the number of the right class of multitouch device to use >> (see MT_CLS_* definitions in hid-multitouch) >> VID/PID can be retrieved from lsusb. >> >> If it's working, then you should also give us your PID so that we can >> add it in the source of hid-multitouch. >> >> Cheers, >> Benjamin >> >> >> On Fri, Jan 20, 2012 at 21:13, Padfoot<padfoot@xxxxxxxxxxxxxx> wrote: >>> >>> On 21/01/12 03:02, Greg KH wrote: >>>> >>>> On Fri, Jan 20, 2012 at 07:13:54PM +1100, Padfoot wrote: >>>>> >>>>> Upgrade from kernel 3.1.9 to 3.2.1 eGalax usb touchscreen device is >>>>> no longer recognised. >>>>> >>>>> Device is an Acer Iconia Tab w501 with inbuilt touchscreen. Screen >>>>> is a pci device but is connected on boot as a usb input device. >>>>> Issue appears to be with either UDEV or USBINPUT boot hook failing >>>>> to recognise the device as can be seen in the dmesg.3.2.1 >>>>> attachment. >>>>> >>>>> Downgrading to kernel 3.1.9 corrects the issue. >>>> >>>> Can you run 'git bisect' between 3.1.0 and 3.2.0 to find the problem >>>> commit here? >>>> >>>> Also, you might want to cc: the linux-input developers, they can help >>>> you out much better than the general list can. >>>> >>>> greg k-h >>>> >>> Hi Greg, >>> >>> I am not a kernel dev, nor have I ever compiled a kernel, so I don't >>> think I >>> am able to help with a git bisect to locate the offending commit. I am >>> just >>> a regular user running pre-compiled packages on my Arch Linux distro. >>> But, >>> of course I am happy to assist wherever I can. >>> >>> Cheers. >>> Lachlan >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-input" in >>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>> More majordomo info at http://vger.kernel.org/majordomo-info.html > > Hi Benjamin, > > Thankyou very much. Your solution has worked brilliantly. > > The device parameters I had to pass to hid-multitouch are as follows: > > echo 3 0eef 7302 259 > /sys/mod........ > > I also have to use the binary daemon driver from eGalax for the device to > work: > http://home.eeti.com.tw/web20/eGalaxTouchDriver/linuxDriver.htm > > Cheers. > Lachlan. > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
