Hello,
On Monday 19 December 2011 10:36 AM, Tatsunosuke Tobita wrote:
> From: Tatsunosuke Tobita <tobita.tatsunosuke@xxxxxxxxxxx>
>
> This adds a driver support for Wacom Stylus Device with I2C interface.
>
> Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@xxxxxxxxxxx>
> ---
> drivers/input/touchscreen/wacom_i2c.c | 244 +++++++++++++++++++++++++++++++++
> drivers/input/touchscreen/wacom_i2c.h | 55 ++++++++
> 2 files changed, 299 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/touchscreen/wacom_i2c.c
> create mode 100644 drivers/input/touchscreen/wacom_i2c.h
>
> diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
> new file mode 100644
> index 0000000..2da4a3b
> --- /dev/null
> +++ b/drivers/input/touchscreen/wacom_i2c.c
> @@ -0,0 +1,244 @@
> +/*
> + * Wacom Penabled Driver for I2C
> + *
> + * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
> + * <tobita.tatsunosuke@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it
> + * and/or modify it under the terms of the GNU General
> + * Public License as published by the Free Software
> + * Foundation; either version of 2 of the License,
> + * or (at your option) any later version.
> + */
> +
> +#include "wacom_i2c.h"
> +
> +static int wacom_send_query(struct wacom_i2c *wac_i2c)
> +{
> + int ret;
> + u8 cmd[4] = {CMD_QUERY0, CMD_QUERY1, CMD_QUERY2, CMD_QUERY3};
> + u8 data[COM_COORD_NUM];
> +
> + ret = i2c_master_send(wac_i2c->client, cmd, sizeof(cmd));
> + if (ret < 0) {
> + dev_printk(KERN_ERR, &wac_i2c->client->dev,
> + "Sending 1st Query failed \n");
> + return -1;
> + }
> +
> + cmd[0] = CMD_THROW0; cmd[1] = CMD_THROW1;
> + ret = i2c_master_send(wac_i2c->client, cmd, 2);
> + if (ret < 0) {
> + dev_printk(KERN_ERR, &wac_i2c->client->dev,
> + "Sending 2nd Query failed \n");
> + return -1;
> + }
> +
> + ret = i2c_master_recv(wac_i2c->client, data, QUERY_SIZE);
> + if (ret < 0) {
> + dev_printk(KERN_ERR, &wac_i2c->client->dev,
> + "Receiving data failed 1\n");
> + return -1;
Why mask the error here why not return ret.
> + }
> +
> + wac_i2c->wac_feature.x_max = get_unaligned_le16(&data[3]);
> + wac_i2c->wac_feature.y_max = get_unaligned_le16(&data[5]);
> + wac_i2c->wac_feature.pressure_max = get_unaligned_le16(&data[11]);
> + wac_i2c->wac_feature.fw_version = get_unaligned_le16(&data[13]);
> +
> + dev_dbg(&wac_i2c->client->dev,
> + "x_max:%d, y_max:%d, pressure:%d, fw:%d\n",
> + wac_i2c->wac_feature.x_max, wac_i2c->wac_feature.y_max,
> + wac_i2c->wac_feature.pressure_max, wac_i2c->wac_feature.fw_version);
> +
> + return 0;
> +}
> +
> +static irqreturn_t wacom_i2c_irq(int irqno, void *param)
> +{
> + struct wacom_i2c *wac_i2c = param;
> + int ret;
> + unsigned int x, y, pressure;
> + unsigned char tsw, f1, f2, ers;
> + u8 data[COM_COORD_NUM];
> +
> + do {
> + ret = i2c_master_recv(wac_i2c->client, data, QUERY_SIZE);
> + } while (gpio_get_value(irq_to_gpio(wac_i2c->client->irq)) == 0);
> +
> + if (ret > 0) {
> + tsw = data[3]&0x01;
> + ers = data[3]&0x04;
> + f1 = data[3]&0x02;
> + f2 = data[3]&0x10;
> + x = le16_to_cpup((__le16 *)&data[4]);
> + y = le16_to_cpup((__le16 *)&data[6]);
> + pressure = le16_to_cpup((__le16 *)&data[8]);
> +
> + input_report_abs(wac_i2c->input, ABS_X, x);
> + input_report_abs(wac_i2c->input, ABS_Y, y);
> + input_report_key(wac_i2c->input, BTN_TOOL_PEN, tsw);
> + input_report_key(wac_i2c->input, BTN_TOOL_RUBBER, ers);
> + input_report_abs(wac_i2c->input, ABS_PRESSURE, pressure);
> + input_report_key(wac_i2c->input, BTN_TOUCH, (tsw || ers));
> + input_report_key(wac_i2c->input, BTN_STYLUS, f1);
> + input_report_key(wac_i2c->input, BTN_STYLUS2, f2);
> +
> + input_sync(wac_i2c->input);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int wacom_i2c_input_open(struct input_dev *dev)
> +{
> + struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
> + int ret;
> + ret = wacom_send_query(wac_i2c);
> + if (ret < 0)
> + return -EIO;
> +
> + wac_i2c->input->id.version = wac_i2c->wac_feature.fw_version;
> + input_set_abs_params(wac_i2c->input, ABS_X, 0,
> + wac_i2c->wac_feature.x_max, 0, 0);
> + input_set_abs_params(wac_i2c->input, ABS_Y, 0,
> + wac_i2c->wac_feature.y_max, 0, 0);
> + input_set_abs_params(wac_i2c->input, ABS_PRESSURE, 0,
> + wac_i2c->wac_feature.pressure_max, 0, 0);
> +
> + return 0;
> +}
> +
> +static void wacom_i2c_input_close(struct input_dev *dev)
> +{
> +}
> +
> +static int __devinit wacom_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct wacom_i2c *wac_i2c;
> + int ret, err;
> + u8 data[COM_COORD_NUM];
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + err = -EIO;
> + goto fail1;
> + }
> +
> + wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
The NULL check could be here as in the next line it is accessed.
> + wac_i2c->input = input_allocate_device();
> + if (wac_i2c == NULL || wac_i2c->input == NULL) {
> + err = -ENOMEM;
> + goto fail2;
> + }
> + wac_i2c->client = client;
> + i2c_set_clientdata(client, wac_i2c);
> + mutex_init(&wac_i2c->lock);
> +
> + __set_bit(BTN_TOOL_PEN, wac_i2c->input->keybit);
> + __set_bit(BTN_TOOL_RUBBER, wac_i2c->input->keybit);
> + __set_bit(BTN_STYLUS, wac_i2c->input->keybit);
> + __set_bit(BTN_STYLUS2, wac_i2c->input->keybit);
> + __set_bit(BTN_TOUCH, wac_i2c->input->keybit);
> +
> + wac_i2c->input->name = "Wacom I2C Digitizer";
> + wac_i2c->input->id.bustype = BUS_I2C;
> + wac_i2c->input->id.vendor = 0x56a;
> + wac_i2c->input->dev.parent = &client->dev;
> + wac_i2c->input->open = wacom_i2c_input_open;
> + wac_i2c->input->close = wacom_i2c_input_close;
> + wac_i2c->input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> + input_set_drvdata(wac_i2c->input, wac_i2c);
> +
> + if (input_register_device(wac_i2c->input)) {
> + dev_printk(KERN_ERR, &wac_i2c->client->dev, "Failed to register input device \n");
> + err = -ENODEV;
> + goto fail3;
> + }
> +
> +
> + ret = request_threaded_irq(wac_i2c->client->irq, NULL,
> + wacom_i2c_irq, IRQF_TRIGGER_FALLING, "WACOM_I2C_IRQ", wac_i2c);
> + if (ret) {
> + dev_printk(KERN_ERR, &wac_i2c->client->dev, "Failed to enable IRQ for EMR \n");
> + return ret;
Should we not unregister the device .
> + }
> +
> + /*Clear the buffer in the firmware*/
> + do {
> + ret = i2c_master_recv(wac_i2c->client, data, QUERY_SIZE);
> + } while (gpio_get_value(irq_to_gpio(wac_i2c->client->irq)) == 0);
> +
> + return 0;
> +
> + fail3:
> + input_free_device(wac_i2c->input);
> + fail2:
> + dev_err(&wac_i2c->client->dev, "Freeing device \n");
> + fail1:
> + return err;
> +}
> +
> +static int __devexit wacom_i2c_remove(struct i2c_client *client)
> +{
> + struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
> +
> + free_irq(wac_i2c->client->irq, wac_i2c);
> + input_unregister_device(wac_i2c->input);
> + kfree(wac_i2c);
> +
> + return 0;
> +}
> +
> +static int wacom_i2c_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + disable_irq(client->irq);
> +
> + return 0;
> +}
> +
> +static int wacom_i2c_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + enable_irq(client->irq);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);
> +
> +static const struct i2c_device_id wacom_i2c_id[] = {
> + {WACNAME, 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, wacom_i2c_id);
> +
> +static struct i2c_driver wacom_i2c_driver = {
> + .driver = {
> + .name = "wacom_i2c",
> + .owner = THIS_MODULE,
> + .pm = &wacom_i2c_pm,
> + },
> +
> + .probe = wacom_i2c_probe,
> + .remove = __devexit_p(wacom_i2c_remove),
> + .id_table = wacom_i2c_id,
> +};
> +
> +static int __init wacom_i2c_init(void)
> +{
> + return i2c_add_driver(&wacom_i2c_driver);
> +}
> +
> +static void __exit wacom_i2c_exit(void)
> +{
> + i2c_del_driver(&wacom_i2c_driver);
> +}
> +
> +module_init(wacom_i2c_init);
> +module_exit(wacom_i2c_exit);
> +
> +MODULE_AUTHOR("Tatsunosuke Tobita <tobita.tatsunosuke@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("WACOM EMR I2C Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/input/touchscreen/wacom_i2c.h b/drivers/input/touchscreen/wacom_i2c.h
> new file mode 100644
> index 0000000..b5c2d07
> --- /dev/null
> +++ b/drivers/input/touchscreen/wacom_i2c.h
> @@ -0,0 +1,55 @@
> +/*
> + * Wacom Penabled Driver for I2C
> + *
> + * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
> + * <tobita.tatsunosuke@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it
> + * and/or modify it under the terms of the GNU General
> + * Public License as published by the Free Software
> + * Foundation; either version of 2 of the License,
> + * or (at your option) any later version.
> + */
> +
> +#ifndef WACOM_I2C_H
> +#define WACOM_I2C_H
> +
> +#include <linux/module.h>
> +#include <linux/input.h>
> +#include <linux/i2c.h>
> +#include <linux/slab.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <asm/unaligned.h>
> +
> +#define NAMEBUF 12
> +#define WACNAME "WAC_I2C_EMR"
> +
> +/*Wacom Command*/
> +#define COM_COORD_NUM 128
> +#define CMD_QUERY0 0x04
> +#define CMD_QUERY1 0x00
> +#define CMD_QUERY2 0x33
> +#define CMD_QUERY3 0x02
> +#define CMD_THROW0 0x05
> +#define CMD_THROW1 0x00
> +#define QUERY_SIZE 19
> +
> +/*Parameters for wacom own features*/
> +struct wacom_features {
> + int x_max;
> + int y_max;
> + int pressure_max;
> + char fw_version;
> +};
> +
> +/*Parameters for i2c driver*/
> +struct wacom_i2c {
> + struct i2c_client *client;
> + struct input_dev *input;
> + struct mutex lock;
> + struct wacom_features wac_feature;
> + int type;
> +};
> +#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
