Re: [PATCH v2 1/2] Input: wacom: Add support for Cintiq 24HD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 7, 2011 at 3:04 PM, Jason Gerecke <killertofu@xxxxxxxxx> wrote:
> Adds support for the Cintiq 24HD. There are two quirks about this
> model that haven't been seen in prior tablets. First, a second
> touch ring is present on this display; it is being exposed via the
> ABS_THROTTLE axis. Second, three capacitive buttons at the top of
> the unit are available; though physically a touch strip, we report
> the use of these buttons with generic KEY_ events.
>
> Signed-off-by: Jason Gerecke <killertofu@xxxxxxxxx>

Reviewed-by: Ping Cheng <pingc@xxxxxxxxx>

Ping

> ---
> Changes from v1:
>  * s/ABS_WHEEL2/ABS_THROTTLE/
>  * Clarify comment about clearing 2nd wheel value
>
>  drivers/input/tablet/wacom_wac.c |   77 +++++++++++++++++++++++++++++++++++++-
>  drivers/input/tablet/wacom_wac.h |    1 +
>  2 files changed, 77 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
> index ecfcbc8..a22e778 100644
> --- a/drivers/input/tablet/wacom_wac.c
> +++ b/drivers/input/tablet/wacom_wac.c
> @@ -452,7 +452,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
>        if ((data[1] & 0xb8) == 0xa0) {
>                t = (data[6] << 2) | ((data[7] >> 6) & 3);
>                if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
> -                   features->type == WACOM_21UX2) {
> +                   features->type == WACOM_21UX2 || features->type == WACOM_24HD) {
>                        t = (t << 1) | (data[1] & 1);
>                }
>                input_report_abs(input, ABS_PRESSURE, t);
> @@ -519,6 +519,56 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
>                                input_report_key(input, wacom->tool[1], 0);
>                                input_report_abs(input, ABS_MISC, 0);
>                        }
> +               } else if (features->type == WACOM_24HD) {
> +                       input_report_key(input, BTN_0, (data[6] & 0x01));
> +                       input_report_key(input, BTN_1, (data[6] & 0x02));
> +                       input_report_key(input, BTN_2, (data[6] & 0x04));
> +                       input_report_key(input, BTN_3, (data[6] & 0x08));
> +                       input_report_key(input, BTN_4, (data[6] & 0x10));
> +                       input_report_key(input, BTN_5, (data[6] & 0x20));
> +                       input_report_key(input, BTN_6, (data[6] & 0x40));
> +                       input_report_key(input, BTN_7, (data[6] & 0x80));
> +                       input_report_key(input, BTN_8, (data[8] & 0x01));
> +                       input_report_key(input, BTN_9, (data[8] & 0x02));
> +                       input_report_key(input, BTN_A, (data[8] & 0x04));
> +                       input_report_key(input, BTN_B, (data[8] & 0x08));
> +                       input_report_key(input, BTN_C, (data[8] & 0x10));
> +                       input_report_key(input, BTN_X, (data[8] & 0x20));
> +                       input_report_key(input, BTN_Y, (data[8] & 0x40));
> +                       input_report_key(input, BTN_Z, (data[8] & 0x80));
> +
> +                       /*
> +                        * Three "buttons" are available on the 24HD which are
> +                        * physically implemented as a touchstrip. Each button
> +                        * is approximately 3 bits wide with a 2 bit spacing.
> +                        * The raw touchstrip bits are stored at:
> +                        *    ((data[3] & 0x1f) << 8) | data[4])
> +                        */
> +                       input_report_key(input, KEY_PROG1, data[4] & 0x07);
> +                       input_report_key(input, KEY_PROG2, data[4] & 0xE0);
> +                       input_report_key(input, KEY_PROG3, data[3] & 0x1C);
> +
> +                       if (data[1] & 0x80) {
> +                               input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f));
> +                       } else {
> +                               /* Out of proximity, clear wheel value. */
> +                               input_report_abs(input, ABS_WHEEL, 0);
> +                       }
> +
> +                       if (data[2] & 0x80) {
> +                               input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f));
> +                       } else {
> +                               /* Out of proximity, clear second wheel value. */
> +                               input_report_abs(input, ABS_THROTTLE, 0);
> +                       }
> +
> +                       if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) {
> +                               input_report_key(input, wacom->tool[1], 1);
> +                               input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
> +                       } else {
> +                               input_report_key(input, wacom->tool[1], 0);
> +                               input_report_abs(input, ABS_MISC, 0);
> +                       }
>                } else {
>                        if (features->type == WACOM_21UX2) {
>                                input_report_key(input, BTN_0, (data[5] & 0x01));
> @@ -1019,6 +1069,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
>        case CINTIQ:
>        case WACOM_BEE:
>        case WACOM_21UX2:
> +       case WACOM_24HD:
>                sync = wacom_intuos_irq(wacom_wac);
>                break;
>
> @@ -1174,6 +1225,26 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
>                __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>                break;
>
> +       case WACOM_24HD:
> +               __set_bit(BTN_A, input_dev->keybit);
> +               __set_bit(BTN_B, input_dev->keybit);
> +               __set_bit(BTN_C, input_dev->keybit);
> +               __set_bit(BTN_X, input_dev->keybit);
> +               __set_bit(BTN_Y, input_dev->keybit);
> +               __set_bit(BTN_Z, input_dev->keybit);
> +
> +               for (i = 0; i < 10; i++)
> +                       __set_bit(BTN_0 + i, input_dev->keybit);
> +
> +               __set_bit(KEY_PROG1, input_dev->keybit);
> +               __set_bit(KEY_PROG2, input_dev->keybit);
> +               __set_bit(KEY_PROG3, input_dev->keybit);
> +
> +               input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
> +               input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
> +               wacom_setup_cintiq(wacom_wac);
> +               break;
> +
>        case WACOM_21UX2:
>                __set_bit(BTN_A, input_dev->keybit);
>                __set_bit(BTN_B, input_dev->keybit);
> @@ -1503,6 +1574,9 @@ static const struct wacom_features wacom_features_0xBB =
>  static const struct wacom_features wacom_features_0xBC =
>        { "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40840, 25400, 2047,
>          63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
> +static const struct wacom_features wacom_features_0xF4 =
> +       { "Wacom Cintiq 24HD",    WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
> +         63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
>  static const struct wacom_features wacom_features_0x3F =
>        { "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
>          63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
> @@ -1702,6 +1776,7 @@ const struct usb_device_id wacom_ids[] = {
>        { USB_DEVICE_WACOM(0xE3) },
>        { USB_DEVICE_WACOM(0xE6) },
>        { USB_DEVICE_WACOM(0x47) },
> +       { USB_DEVICE_WACOM(0xF4) },
>        { USB_DEVICE_LENOVO(0x6004) },
>        { }
>  };
> diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
> index 27f1d1c..050acae 100644
> --- a/drivers/input/tablet/wacom_wac.h
> +++ b/drivers/input/tablet/wacom_wac.h
> @@ -59,6 +59,7 @@ enum {
>        INTUOS4S,
>        INTUOS4,
>        INTUOS4L,
> +       WACOM_24HD,
>        WACOM_21UX2,
>        CINTIQ,
>        WACOM_BEE,
> --
> 1.7.7.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux