Let compiler figure out which ones makes most sense to inline.
Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---
drivers/input/touchscreen/ucb1400_ts.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index db525ac..5c6b7b3 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -35,7 +35,7 @@ static int ts_delay = 55; /* us */
static int ts_delay_pressure; /* us */
/* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
+static void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
{
ucb1400_reg_write(ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
@@ -47,7 +47,7 @@ static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
* Switch to pressure mode, and read pressure. We don't need to wait
* here, since both plates are being driven.
*/
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
@@ -63,7 +63,7 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
@@ -86,7 +86,7 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
+static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
@@ -107,7 +107,7 @@ static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
* Switch to X plate resistance mode. Set MX to ground, PX to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
@@ -119,7 +119,7 @@ static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
* Switch to Y plate resistance mode. Set MY to ground, PY to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
@@ -127,21 +127,21 @@ static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
return ucb1400_adc_read(ucb->ac97, 0, adcsync);
}
-static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97)
+static int ucb1400_ts_pen_up(struct snd_ac97 *ac97)
{
unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
}
-static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
+static void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
{
ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
}
-static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
+static void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
{
ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
}
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
