Hi David,
Sorry for the big delay to respond to this.
* David Herrmann <dh.herrmann@xxxxxxxxxxxxxx> [2011-08-26 14:06:02 +0200]:
> Current hidp driver purges the in/out queue on HID shutdown, but does
> not prevent further I/O. If a driver uses hidp_output_raw_report or
> hidp_get_raw_report during shutdown, the driver hangs for 5 or 10
> seconds per call until it gets a timeout.
> That is, if the output queue of an HID driver has 10 messages pending,
> it will take 50s until hid_destroy_device() will return. The
> hidp_session_sem semaphore is held during shutdown so no other HID
> device may be added/removed during this time.
>
> This patch makes hidp_output_raw_report and hidp_get_raw_report fail if
> session->terminate is true. Also hidp_session will wakeup all current
> calls to these functions to cancel the current operations.
>
> We already purge the current I/O queues on hidp_stop(), so this data loss
> does not change the behaviour of the HID drivers.
>
> Signed-off-by: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
> ---
> net/bluetooth/hidp/core.c | 40 ++++++++++++++++++++++++++--------------
> 1 files changed, 26 insertions(+), 14 deletions(-)
>
> diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
> index 4423e3a..e134528 100644
> --- a/net/bluetooth/hidp/core.c
> +++ b/net/bluetooth/hidp/core.c
> @@ -255,6 +255,9 @@ static int __hidp_send_ctrl_message(struct hidp_session *session,
>
> BT_DBG("session %p data %p size %d", session, data, size);
>
> + if (atomic_read(&session->terminate))
> + return -EIO;
> +
> skb = alloc_skb(size + 1, GFP_ATOMIC);
> if (!skb) {
> BT_ERR("Can't allocate memory for new frame");
> @@ -320,6 +323,13 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep
> return hidp_queue_report(session, buf, rsize);
> }
>
> +static void hidp_wakeup_reportq(struct hidp_session *session)
> +{
> + clear_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags);
> + clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
> + wake_up_interruptible(&session->report_queue);
> +}
> +
> static int hidp_get_raw_report(struct hid_device *hid,
> unsigned char report_number,
> unsigned char *data, size_t count,
> @@ -329,6 +339,7 @@ static int hidp_get_raw_report(struct hid_device *hid,
> struct sk_buff *skb;
> size_t len;
> int numbered_reports = hid->report_enum[report_type].numbered;
> + int ret;
>
> switch (report_type) {
> case HID_FEATURE_REPORT:
> @@ -352,8 +363,9 @@ static int hidp_get_raw_report(struct hid_device *hid,
> session->waiting_report_number = numbered_reports ? report_number : -1;
> set_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
> data[0] = report_number;
> - if (hidp_send_ctrl_message(hid->driver_data, report_type, data, 1))
> - goto err_eio;
> + ret = hidp_send_ctrl_message(hid->driver_data, report_type, data, 1);
> + if (ret)
> + goto err;
>
> /* Wait for the return of the report. The returned report
> gets put in session->report_return. */
> @@ -365,11 +377,13 @@ static int hidp_get_raw_report(struct hid_device *hid,
> 5*HZ);
> if (res == 0) {
> /* timeout */
> - goto err_eio;
> + ret = -EIO;
> + goto err;
> }
> if (res < 0) {
> /* signal */
> - goto err_restartsys;
> + ret = -ERESTARTSYS;
> + goto err;
> }
> }
>
> @@ -390,14 +404,10 @@ static int hidp_get_raw_report(struct hid_device *hid,
>
> return len;
>
> -err_restartsys:
> - clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
> - mutex_unlock(&session->report_mutex);
> - return -ERESTARTSYS;
> -err_eio:
> +err:
> clear_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
> mutex_unlock(&session->report_mutex);
> - return -EIO;
> + return ret;
> }
>
> static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
> @@ -422,11 +432,10 @@ static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, s
>
> /* Set up our wait, and send the report request to the device. */
> set_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags);
> - if (hidp_send_ctrl_message(hid->driver_data, report_type,
> - data, count)) {
> - ret = -ENOMEM;
> + ret = hidp_send_ctrl_message(hid->driver_data, report_type, data,
> + count);
> + if (ret)
> goto err;
> - }
>
> /* Wait for the ACK from the device. */
> while (test_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags)) {
> @@ -733,6 +742,9 @@ static int hidp_session(void *arg)
> remove_wait_queue(sk_sleep(intr_sk), &intr_wait);
> remove_wait_queue(sk_sleep(ctrl_sk), &ctrl_wait);
>
> + atomic_inc(&session->terminate);
At this point seeems that terminate is already > 1.
> + hidp_wakeup_reportq(session);
just inline hidp_wakeup_reportq here, no need to create a function for this.
Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
