Re: [PATCH v5 7/8] Input: elantech - add v3 hardware support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

On Mon, 5 Sep 2011 12:35:28 +0800, Daniel Kurtz <djkurtz@xxxxxxxxxxxx> wrote:
> Hi JJ,
> 
> On Mon, Sep 5, 2011 at 10:16 AM, JJ Ding <jj_ding@xxxxxxxxxx> wrote:
> > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> > index 2ae7c49..c4ceefd 100644
> > --- a/drivers/input/mouse/elantech.c
> > +++ b/drivers/input/mouse/elantech.c
> > @@ -108,6 +108,16 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
> >                        rc = -1;
> >                }
> >                break;
> > +
> > +       case 3:
> > +               if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
> > +                   elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
> > +                   elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
> > +                   elantech_ps2_command(psmouse, NULL, reg) ||
> > +                   elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
> > +                       rc = -1;
> > +               }
> > +               break;
> >        }
> >
> >        if (rc)
> > @@ -154,6 +164,18 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
> >                        rc = -1;
> >                }
> >                break;
> > +
> > +       case 3:
> > +               if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
> > +                   elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
> > +                   elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
> > +                   elantech_ps2_command(psmouse, NULL, reg) ||
> > +                   elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
> > +                   elantech_ps2_command(psmouse, NULL, val) ||
> > +                   elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
> > +                       rc = -1;
> > +               }
> > +               break;
> >        }
> >
> >        if (rc)
> > @@ -350,6 +372,84 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
> >        input_sync(dev);
> >  }
> >
> > +/*
> > + * Interpret complete data packets and report absolute mode input events for
> > + * hardware version 3. (12 byte packets for two fingers)
> > + */
> > +static void elantech_report_absolute_v3(struct psmouse *psmouse,
> > +                                       int packet_type)
> > +{
> > +       struct input_dev *dev = psmouse->dev;
> > +       struct elantech_data *etd = psmouse->private;
> > +       unsigned char *packet = psmouse->packet;
> > +       unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
> > +       unsigned int width = 0, pres = 0;
> > +
> > +       /* byte 0: n1  n0   .   .   .   .   R   L */
> > +       fingers = (packet[0] & 0xc0) >> 6;
> > +
> > +       switch (fingers) {
> > +       case 3:
> > +       case 1:
> > +               /*
> > +                * byte 1:  .   .   .   .  x11 x10 x9  x8
> > +                * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
> > +                */
> > +               x1 = ((packet[1] & 0x0f) << 8) | packet[2];
> > +               /*
> > +                * byte 4:  .   .   .   .  y11 y10 y9  y8
> > +                * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
> > +                */
> > +               y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
> > +               break;
> > +
> > +       case 2:
> > +               if (packet_type == PACKET_V3_HEAD) {
> > +                       /*
> > +                        * byte 1:   .    .    .    .  ax11 ax10 ax9  ax8
> > +                        * byte 2: ax7  ax6  ax5  ax4  ax3  ax2  ax1  ax0
> > +                        */
> > +                       etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
> > +                       /*
> > +                        * byte 4:   .    .    .    .  ay11 ay10 ay9  ay8
> > +                        * byte 5: ay7  ay6  ay5  ay4  ay3  ay2  ay1  ay0
> > +                        */
> > +                       etd->prev_y = etd->y_max -
> > +                               (((packet[4] & 0x0f) << 8) | packet[5]);
> > +                       /*
> > +                        * wait for next packet
> > +                        */
> > +                       return;
> > +               }
> > +
> > +               /* packet_type == PACKET_V3_TAIL */
> > +               x1 = etd->prev_x;
> > +               y1 = etd->prev_y;
> > +               x2 = ((packet[1] & 0x0f) << 8) | packet[2];
> > +               y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
> > +               break;
> > +       }
> > +
> > +       pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
> > +       width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
> > +
> > +       input_report_key(dev, BTN_TOUCH, fingers != 0);
> > +       if (fingers != 0) {
> > +               input_report_abs(dev, ABS_X, x1);
> > +               input_report_abs(dev, ABS_Y, y1);
> > +       }
> > +       elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
> 
> Originally, v3 was using semi-mt, which reported corner coordinates of
> a box containing at least two of the N touches on the touchpad.  I
> thought this was due to hardware limitation.
> 
> If the hardware really can report true positions for (up to) 3
> contacts, then using pure MT-B is a good approach.  This driver still
> seems to mix semi-mt and MT-B together a bit.
> 
> Can you report all three contacts in their own slots, 0, 1 and 2,
> instead of just reoprting two of them with 0,1?
> 
> Also, when reporting the 'legacy single touch' coordinate (ABS_X,
> ABS_Y), please use:
> input_mt_report_pointer_emulation(), instead of always reporting the
> last (x1,y1).  Otherwise the single touch point will bounce back and
> forth between 1st and 3rd touch.

v3 can only track the true positions of two fingers. With 3 finger
touch, it reports the lowest value of x and the biggest value of y,
among the three fingers. v3 changed the protocol so it could report
2-finger touch data w/o reduced resolution and improved the hardware to
truly track 2 fingers independently, otherwise it's pretty much the same
as v2.

> > +       input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
> > +       input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
> > +       input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
> 
> Use input_mt_report_pointer_emulation() with use_count = true.   This
> will also report ABS_PRESURE (but not ABS_TOOL_WIDTH, unfortunately).
> 
> > +       input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
> > +       input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
> > +       input_report_abs(dev, ABS_PRESSURE, pres);
> > +       input_report_abs(dev, ABS_TOOL_WIDTH, width);
> > +
> > +       input_sync(dev);
> > +}
> > +
> >  static int elantech_packet_check_v1(struct psmouse *psmouse)
> >  {
> >        struct elantech_data *etd = psmouse->private;
> > @@ -403,11 +503,37 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
> >  }
> >
> >  /*
> > + * We check the constant bits to determine what packet type we get,
> > + * so packet checking is mandatory for v3 hardware.
> > + */
> > +static int elantech_packet_check_v3(struct psmouse *psmouse)
> > +{
> > +       const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff };
> > +       unsigned char *packet = psmouse->packet;
> > +
> > +       /*
> > +        * check debounce first, it has the same signature in byte 0
> > +        * and byte 3 as PACKET_V3_HEAD.
> > +        */
> > +       if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
> > +               return PACKET_DEBOUNCE;
> > +
> > +       if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
> > +               return PACKET_V3_HEAD;
> > +
> > +       if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
> > +               return PACKET_V3_TAIL;
> > +
> > +       return PACKET_UNKNOWN;
> > +}
> > +
> > +/*
> >  * Process byte stream from mouse and handle complete packets
> >  */
> >  static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
> >  {
> >        struct elantech_data *etd = psmouse->private;
> > +       int packet_type;
> >
> >        if (psmouse->pktcnt < psmouse->pktsize)
> >                return PSMOUSE_GOOD_DATA;
> > @@ -429,6 +555,18 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
> >
> >                elantech_report_absolute_v2(psmouse);
> >                break;
> > +
> > +       case 3:
> > +               packet_type = elantech_packet_check_v3(psmouse);
> > +               /* ignore debounce */
> > +               if (packet_type == PACKET_DEBOUNCE)
> > +                       return PSMOUSE_FULL_PACKET;
> > +
> > +               if (packet_type == PACKET_UNKNOWN)
> > +                       return PSMOUSE_BAD_DATA;
> > +
> > +               elantech_report_absolute_v3(psmouse, packet_type);
> > +               break;
> >        }
> >
> >        return PSMOUSE_FULL_PACKET;
> > @@ -463,8 +601,15 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
> >                    elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
> >                    elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
> >                        rc = -1;
> > -                       break;
> >                }
> > +               break;
> > +
> > +       case 3:
> > +               etd->reg_10 = 0x0b;
> > +               if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
> > +                       rc = -1;
> > +
> > +               break;
> >        }
> >
> >        if (rc == 0) {
> > @@ -498,11 +643,12 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
> >        return rc;
> >  }
> >
> > -static void set_range(struct psmouse *psmouse, unsigned int *x_min,
> > +static int set_range(struct psmouse *psmouse, unsigned int *x_min,
> >                     unsigned int *y_min, unsigned int *x_max,
> >                     unsigned int *y_max)
> >  {
> >        struct elantech_data *etd = psmouse->private;
> > +       unsigned char param[3];
> >        int i;
> >
> >        switch (etd->hw_version) {
> > @@ -530,19 +676,30 @@ static void set_range(struct psmouse *psmouse, unsigned int *x_min,
> >                        *y_max = (etd->capabilities[2] - i) * 64;
> >                }
> >                break;
> > +
> > +       case 3:
> > +               if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
> > +                       return -1;
> > +
> > +               *x_max = (0x0f & param[0]) << 8 | param[1];
> > +               *y_max = (0xf0 & param[0]) << 4 | param[2];
> > +               break;
> >        }
> > +
> > +       return 0;
> >  }
> >
> >  /*
> >  * Set the appropriate event bits for the input subsystem
> >  */
> > -static void elantech_set_input_params(struct psmouse *psmouse)
> > +static int elantech_set_input_params(struct psmouse *psmouse)
> >  {
> >        struct input_dev *dev = psmouse->dev;
> >        struct elantech_data *etd = psmouse->private;
> >        unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0;
> >
> > -       set_range(psmouse, &x_min, &y_min, &x_max, &y_max);
> > +       if (set_range(psmouse, &x_min, &y_min, &x_max, &y_max))
> > +               return -1;
> >
> >        __set_bit(EV_KEY, dev->evbit);
> >        __set_bit(EV_ABS, dev->evbit);
> > @@ -570,6 +727,9 @@ static void elantech_set_input_params(struct psmouse *psmouse)
> >
> >        case 2:
> >                __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
> > +               __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
> > +               /* fall through */
> > +       case 3:
> >                input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
> >                input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
> >                if (etd->reports_pressure) {
> > @@ -578,7 +738,6 @@ static void elantech_set_input_params(struct psmouse *psmouse)
> >                        input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
> >                                             ETP_WMAX_V2, 0, 0);
> >                }
> > -               __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
> >                input_mt_init_slots(dev, 2);
> 
> Should this be 3?
> 
> >                input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
> >                input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
> > @@ -586,6 +745,8 @@ static void elantech_set_input_params(struct psmouse *psmouse)
> >        }
> >
> >        etd->y_max = y_max;
> > +
> > +       return 0;
> >  }
> >
> >  struct elantech_attr_data {
> > @@ -727,7 +888,8 @@ int elantech_detect(struct psmouse *psmouse, bool set_properties)
> >         * Report this in case there are Elantech models that use a different
> >         * set of magic numbers
> >         */
> > -       if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
> > +       if (param[0] != 0x3c || param[1] != 0x03 ||
> > +           (param[2] != 0xc8 && param[2] != 0x00)) {
> >                pr_debug("unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
> >                         param[0], param[1], param[2]);
> >                return -1;
> > @@ -793,16 +955,16 @@ static int elantech_reconnect(struct psmouse *psmouse)
> >  /*
> >  * determine hardware version and set some properties according to it.
> >  */
> > -static void elantech_set_properties(struct elantech_data *etd)
> > +static int elantech_set_properties(struct elantech_data *etd)
> >  {
> > -       /*
> > -        * Assume every version greater than 0x020030 is new EeePC style
> > -        * hardware with 6 byte packets, except 0x020600
> > -        */
> >        if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
> >                etd->hw_version = 1;
> > -       else
> > +       else if (etd->fw_version < 0x150600)
> >                etd->hw_version = 2;
> > +       else if ((etd->fw_version & 0x0f0000) >> 16 == 5)
> > +               etd->hw_version = 3;
> > +       else
> > +               return -1;
> >
> >        /*
> >         * Turn on packet checking by default.
> > @@ -817,13 +979,15 @@ static void elantech_set_properties(struct elantech_data *etd)
> >        etd->jumpy_cursor =
> >                (etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
> >
> > -       if (etd->hw_version == 2) {
> > +       if (etd->hw_version > 1) {
> >                /* For now show extra debug information */
> >                etd->debug = 1;
> >
> >                if (etd->fw_version >= 0x020800)
> >                        etd->reports_pressure = true;
> >        }
> > +
> > +       return 0;
> >  }
> >
> >  /*
> > @@ -850,9 +1014,12 @@ int elantech_init(struct psmouse *psmouse)
> >                pr_err("failed to query firmware version.\n");
> >                goto init_fail;
> >        }
> > -
> >        etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
> > -       elantech_set_properties(etd);
> > +
> > +       if (elantech_set_properties(etd)) {
> > +               pr_err("unknown hardware version, aborting...\n");
> > +               goto init_fail;
> > +       }
> >        pr_info("assuming hardware version %d "
> >                "(with firmware version 0x%02x%02x%02x)\n",
> >                etd->hw_version, param[0], param[1], param[2]);
> > @@ -871,7 +1038,10 @@ int elantech_init(struct psmouse *psmouse)
> >                goto init_fail;
> >        }
> >
> > -       elantech_set_input_params(psmouse);
> > +       if (elantech_set_input_params(psmouse)) {
> > +               pr_err("failed to query touchpad range.\n");
> > +               goto init_fail;
> > +       }
> >
> >        error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
> >                                   &elantech_attr_group);
> > @@ -883,7 +1053,7 @@ int elantech_init(struct psmouse *psmouse)
> >        psmouse->protocol_handler = elantech_process_byte;
> >        psmouse->disconnect = elantech_disconnect;
> >        psmouse->reconnect = elantech_reconnect;
> > -       psmouse->pktsize = etd->hw_version == 2 ? 6 : 4;
> > +       psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
> >
> >        return 0;
> >
> > diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
> > index d9e6144..236c33c 100644
> > --- a/drivers/input/mouse/elantech.h
> > +++ b/drivers/input/mouse/elantech.h
> > @@ -16,6 +16,7 @@
> >  /*
> >  * Command values for Synaptics style queries
> >  */
> > +#define ETP_FW_ID_QUERY                        0x00
> >  #define ETP_FW_VERSION_QUERY           0x01
> >  #define ETP_CAPABILITIES_QUERY         0x02
> >
> > @@ -24,6 +25,7 @@
> >  */
> >  #define ETP_REGISTER_READ              0x10
> >  #define ETP_REGISTER_WRITE             0x11
> > +#define ETP_REGISTER_READWRITE         0x00
> >
> >  /*
> >  * Hardware version 2 custom PS/2 command value
> > @@ -79,6 +81,14 @@
> >  #define ETP_WMIN_V2                    0
> >  #define ETP_WMAX_V2                    15
> >
> > +/*
> > + * v3 hardware has 2 kinds of packet types.
> > + */
> > +#define PACKET_UNKNOWN                 0x01
> > +#define PACKET_DEBOUNCE                        0x02
> > +#define PACKET_V3_HEAD                 0x03
> > +#define PACKET_V3_TAIL                 0x04
> > +
> >  struct elantech_data {
> >        unsigned char reg_10;
> >        unsigned char reg_11;
> > @@ -98,6 +108,8 @@ struct elantech_data {
> >        unsigned int fw_version;
> >        unsigned int single_finger_reports;
> >        unsigned int y_max;
> > +       unsigned int prev_x;
> > +       unsigned int prev_y;
> >        unsigned char parity[256];
> >  };
> >
> > --
> > 1.7.4.1
> >
> 
��.n��������+%������w��{.n�����{��)��^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux