Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges should be just the raw resolution of the device. Otherwise, they can cause underflow on the Y axis. Suggested-by: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx> Signed-off-by: JJ Ding <jj_ding@xxxxxxxxxx> --- drivers/input/mouse/elantech.h | 15 ++++++--------- 1 files changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index b54ea27..d9e6144 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -66,16 +66,13 @@ #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) /* - * It seems the resolution for hardware version 2 doubled. - * Hence the X and Y ranges are doubled too. - * The bezel around the pad also appears to be smaller + * The resolution for older v2 hardware doubled. + * (newer v2's firmware provides command so we can query) */ -#define ETP_EDGE_FUZZ_V2 8 - -#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) -#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) +#define ETP_XMIN_V2 0 +#define ETP_XMAX_V2 1152 +#define ETP_YMIN_V2 0 +#define ETP_YMAX_V2 768 #define ETP_PMIN_V2 0 #define ETP_PMAX_V2 255 -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
