Hi Seth,
On Thu, 18 Aug 2011 12:39:59 -0500, Seth Forshee <seth.forshee@xxxxxxxxxxxxx> wrote:
> On Thu, Aug 18, 2011 at 09:57:09AM +0800, JJ Ding wrote:
> > @@ -352,6 +374,94 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
> > input_sync(dev);
> > }
> >
> > +/*
> > + * firmware tells us there's noise.
> > + */
> > +static inline int debounce(unsigned int x, unsigned int y)
> > +{
> > + return (x == 0xfff) && (y == 0xfff);
> > +}
>
> This is problematic in my testing, in two ways.
>
> First, it never actually triggers, because the y values passed to it are
> not the raw data from the packets and as such are not 0xfff anymore in
> the cases you're trying to detect.
>
> Second, I get these packets with 1 and 2 finger touches on the Samsung
> NF310, but you only check it in the 3 finger case.
>
> As a result, I'm getting some reports with negative values for the y
> position.
Thank you for reporting this bug.
As for now, the following should fix this issue.
I will correct this in v2.
---
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index e13a719..fa842f7 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -410,11 +410,12 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
* byte 4: . . . . y11 y10 y9 y8
* byte 5: y7 y6 y5 y4 y3 y2 y1 y0
*/
- y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
+ y1 = ((packet[4] & 0x0f) << 8) | packet[5];
if (fingers == 3 && debounce(x1, y1))
return;
+ y1 = etd->y_max - y1;
break;
case 2:
---
> > +
> > +/*
> > + * Interpret complete data packets and report absolute mode input events for
> > + * hardware version 3. (12 byte packets for two fingers)
> > + */
> > +static void elantech_report_absolute_v3(struct psmouse *psmouse,
> > + int packet_type)
> > +{
> > + struct input_dev *dev = psmouse->dev;
> > + struct elantech_data *etd = psmouse->private;
> > + unsigned char *packet = psmouse->packet;
> > + unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
> > + unsigned int width = 0, pres = 0;
> > +
> > + /* byte 0: n1 n0 . . . . R L */
> > + fingers = (packet[0] & 0xc0) >> 6;
> > +
> > + switch (fingers) {
> > + case 3:
> > + case 1:
> > + /*
> > + * byte 1: . . . . x11 x10 x9 x8
> > + * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
> > + */
> > + x1 = ((packet[1] & 0x0f) << 8) | packet[2];
> > + /*
> > + * byte 4: . . . . y11 y10 y9 y8
> > + * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
> > + */
> > + y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
> > +
> > + if (fingers == 3 && debounce(x1, y1))
> > + return;
> > +
> > + break;
> > +
> > + case 2:
> > + if (packet_type == PACKET_V3_HEAD) {
> > + /*
> > + * byte 1: . . . . ax11 ax10 ax9 ax8
> > + * byte 2: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
> > + */
> > + etd->prev_x = ((packet[1] & 0x0f) << 8) | packet[2];
> > + /*
> > + * byte 4: . . . . ay11 ay10 ay9 ay8
> > + * byte 5: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
> > + */
> > + etd->prev_y = etd->y_max -
> > + (((packet[4] & 0x0f) << 8) | packet[5]);
> > + /*
> > + * wait for next packet
> > + */
> > + return;
> > + }
> > +
> > + /* packet_type == PACKET_V3_TAIL */
> > + x1 = etd->prev_x;
> > + y1 = etd->prev_y;
> > + x2 = ((packet[1] & 0x0f) << 8) | packet[2];
> > + y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
> > + break;
> > + }
> > +
> > + pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
> > + width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
> > +
> > + input_report_key(dev, BTN_TOUCH, fingers != 0);
> > + input_report_abs(dev, ABS_X, x1);
> > + input_report_abs(dev, ABS_Y, y1);
>
> You should only report the ABS_[XY] coordinates when fingers != 0. The
> xorg synaptics module sees the values reported in that case as
> legitimate. This is causing me to see strange behaviors when scrolling
> with two-finger drags.
AFAIK, though v2 and v3 differ in packet format, they really report the
same data to the userspace. In this version of v3 support, I even try to
make v2 and v3 report all the data in the same sequnce. If you're seeing
this issue, maybe we should do the same with v2?
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
