This is version 3 of the driver for Bosch Sensortec's accelerometers BMA150 and SMB380. Since last time around, the following has happened: * community review: Register the driver as a input_polled_device. * community review: added runtime_pm support. * community review: removed sysfs enable node * community review: removed the value sysfs node * community review: rephrased delay sysfs description * Removed mode sysfs node * Removed delay sysfs node * Listed both bma150 & smb380 as supported i2c device id's. * Added hw initialization function which will be called upon probing. * Added soft reset function to be called from the probe. * Minor consistency changes. -- Best regards, Eric http://www.unixphere.com Eric Andersson (1): input: add driver for Bosch Sensortec's BMA150 accelerometer Documentation/ABI/testing/sysfs-i2c-bma150 | 22 + drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/bma150.c | 577 ++++++++++++++++++++++++++++ 4 files changed, 611 insertions(+), 0 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-i2c-bma150 create mode 100644 drivers/input/misc/bma150.c -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
