Signed-off-by: Nathan Royer <nroyer@xxxxxxxxxxxxxx> --- drivers/misc/inv_mpu/log.h | 287 +++++++++++++++++++++++++++++++++ drivers/misc/inv_mpu/mldl_print_cfg.c | 131 +++++++++++++++ drivers/misc/inv_mpu/mldl_print_cfg.h | 38 +++++ drivers/misc/inv_mpu/mltypes.h | 226 ++++++++++++++++++++++++++ 4 files changed, 682 insertions(+), 0 deletions(-) create mode 100644 drivers/misc/inv_mpu/log.h create mode 100644 drivers/misc/inv_mpu/mldl_print_cfg.c create mode 100644 drivers/misc/inv_mpu/mldl_print_cfg.h create mode 100644 drivers/misc/inv_mpu/mltypes.h diff --git a/drivers/misc/inv_mpu/log.h b/drivers/misc/inv_mpu/log.h new file mode 100644 index 0000000..a8db425 --- /dev/null +++ b/drivers/misc/inv_mpu/log.h @@ -0,0 +1,287 @@ +/* + $License: + Copyright (C) 2011 InvenSense Corporation, All Rights Reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + $ + */ + +/* + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (C) 2005 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* + * C/C++ logging functions. See the logging documentation for API details. + * + * We'd like these to be available from C code (in case we import some from + * somewhere), so this has a C interface. + * + * The output will be correct when the log file is shared between multiple + * threads and/or multiple processes so long as the operating system + * supports O_APPEND. These calls have mutex-protected data structures + * and so are NOT reentrant. Do not use MPL_LOG in a signal handler. + */ +#ifndef _LIBS_CUTILS_MPL_LOG_H +#define _LIBS_CUTILS_MPL_LOG_H + +#include "mltypes.h" +#include <stdarg.h> + + +#include <linux/kernel.h> + + +/* --------------------------------------------------------------------- */ + +/* + * Normally we strip MPL_LOGV (VERBOSE messages) from release builds. + * You can modify this (for example with "#define MPL_LOG_NDEBUG 0" + * at the top of your source file) to change that behavior. + */ +#ifndef MPL_LOG_NDEBUG +#ifdef NDEBUG +#define MPL_LOG_NDEBUG 1 +#else +#define MPL_LOG_NDEBUG 0 +#endif +#endif + +#define MPL_LOG_UNKNOWN MPL_LOG_VERBOSE +#define MPL_LOG_DEFAULT KERN_DEFAULT +#define MPL_LOG_VERBOSE KERN_CONT +#define MPL_LOG_DEBUG KERN_NOTICE +#define MPL_LOG_INFO KERN_INFO +#define MPL_LOG_WARN KERN_WARNING +#define MPL_LOG_ERROR KERN_ERR +#define MPL_LOG_SILENT MPL_LOG_VERBOSE + + + +/* + * This is the local tag used for the following simplified + * logging macros. You can change this preprocessor definition + * before using the other macros to change the tag. + */ +#ifndef MPL_LOG_TAG +#define MPL_LOG_TAG +#endif + +/* --------------------------------------------------------------------- */ + +/* + * Simplified macro to send a verbose log message using the current MPL_LOG_TAG. + */ +#ifndef MPL_LOGV +#if MPL_LOG_NDEBUG +#define MPL_LOGV(fmt, ...) \ + do { \ + if (0) \ + MPL_LOG(LOG_VERBOSE, MPL_LOG_TAG, fmt, ##__VA_ARGS__);\ + } while (0) +#else +#define MPL_LOGV(fmt, ...) MPL_LOG(LOG_VERBOSE, MPL_LOG_TAG, fmt, ##__VA_ARGS__) +#endif +#endif + +#ifndef CONDITION +#define CONDITION(cond) ((cond) != 0) +#endif + +#ifndef MPL_LOGV_IF +#if MPL_LOG_NDEBUG +#define MPL_LOGV_IF(cond, fmt, ...) \ + do { if (0) MPL_LOG(fmt, ##__VA_ARGS__); } while (0) +#else +#define MPL_LOGV_IF(cond, fmt, ...) \ + ((CONDITION(cond)) \ + ? MPL_LOG(LOG_VERBOSE, MPL_LOG_TAG, fmt, ##__VA_ARGS__) \ + : (void)0) +#endif +#endif + +/* + * Simplified macro to send a debug log message using the current MPL_LOG_TAG. + */ +#ifndef MPL_LOGD +#define MPL_LOGD(fmt, ...) MPL_LOG(LOG_DEBUG, MPL_LOG_TAG, fmt, ##__VA_ARGS__) +#endif + +#ifndef MPL_LOGD_IF +#define MPL_LOGD_IF(cond, fmt, ...) \ + ((CONDITION(cond)) \ + ? MPL_LOG(LOG_DEBUG, MPL_LOG_TAG, fmt, ##__VA_ARGS__) \ + : (void)0) +#endif + +/* + * Simplified macro to send an info log message using the current MPL_LOG_TAG. + */ +#ifndef MPL_LOGI +#define MPL_LOGI(fmt, ...) MPL_LOG(LOG_INFO, MPL_LOG_TAG, fmt, ##__VA_ARGS__) +#endif + +#ifndef MPL_LOGI_IF +#define MPL_LOGI_IF(cond, fmt, ...) \ + ((CONDITION(cond)) \ + ? MPL_LOG(LOG_INFO, MPL_LOG_TAG, fmt, ##__VA_ARGS__) \ + : (void)0) +#endif + +/* + * Simplified macro to send a warning log message using the current MPL_LOG_TAG. + */ +#ifndef MPL_LOGW +#define MPL_LOGW(fmt, ...) printk(KERN_WARNING MPL_LOG_TAG fmt, ##__VA_ARGS__) +#endif + +#ifndef MPL_LOGW_IF +#define MPL_LOGW_IF(cond, fmt, ...) \ + ((CONDITION(cond)) \ + ? MPL_LOG(LOG_WARN, MPL_LOG_TAG, fmt, ##__VA_ARGS__) \ + : (void)0) +#endif + +/* + * Simplified macro to send an error log message using the current MPL_LOG_TAG. + */ +#ifndef MPL_LOGE +#define MPL_LOGE(fmt, ...) printk(KERN_ERR MPL_LOG_TAG fmt, ##__VA_ARGS__) +#endif + +#ifndef MPL_LOGE_IF +#define MPL_LOGE_IF(cond, fmt, ...) \ + ((CONDITION(cond)) \ + ? MPL_LOG(LOG_ERROR, MPL_LOG_TAG, fmt, ##__VA_ARGS__) \ + : (void)0) +#endif + +/* --------------------------------------------------------------------- */ + +/* + * Log a fatal error. If the given condition fails, this stops program + * execution like a normal assertion, but also generating the given message. + * It is NOT stripped from release builds. Note that the condition test + * is -inverted- from the normal assert() semantics. + */ +#define MPL_LOG_ALWAYS_FATAL_IF(cond, fmt, ...) \ + ((CONDITION(cond)) \ + ? ((void)android_printAssert(#cond, MPL_LOG_TAG, \ + fmt, ##__VA_ARGS__)) \ + : (void)0) + +#define MPL_LOG_ALWAYS_FATAL(fmt, ...) \ + (((void)android_printAssert(NULL, MPL_LOG_TAG, fmt, ##__VA_ARGS__))) + +/* + * Versions of MPL_LOG_ALWAYS_FATAL_IF and MPL_LOG_ALWAYS_FATAL that + * are stripped out of release builds. + */ +#if MPL_LOG_NDEBUG +#define MPL_LOG_FATAL_IF(cond, fmt, ...) \ + do { \ + if (0) \ + MPL_LOG_ALWAYS_FATAL_IF(cond, fmt, ##__VA_ARGS__); \ + } while (0) +#define MPL_LOG_FATAL(fmt, ...) \ + do { \ + if (0) \ + MPL_LOG_ALWAYS_FATAL(fmt, ##__VA_ARGS__) \ + } while (0) +#else +#define MPL_LOG_FATAL_IF(cond, fmt, ...) \ + MPL_LOG_ALWAYS_FATAL_IF(cond, fmt, ##__VA_ARGS__) +#define MPL_LOG_FATAL(fmt, ...) \ + MPL_LOG_ALWAYS_FATAL(fmt, ##__VA_ARGS__) +#endif + +/* + * Assertion that generates a log message when the assertion fails. + * Stripped out of release builds. Uses the current MPL_LOG_TAG. + */ +#define MPL_LOG_ASSERT(cond, fmt, ...) \ + MPL_LOG_FATAL_IF(!(cond), fmt, ##__VA_ARGS__) + +/* --------------------------------------------------------------------- */ + +/* + * Basic log message macro. + * + * Example: + * MPL_LOG(MPL_LOG_WARN, NULL, "Failed with error %d", errno); + * + * The second argument may be NULL or "" to indicate the "global" tag. + */ +#ifndef MPL_LOG +#define MPL_LOG(priority, tag, fmt, ...) \ + MPL_LOG_PRI(priority, tag, fmt, ##__VA_ARGS__) +#endif + +/* + * Log macro that allows you to specify a number for the priority. + */ +#ifndef MPL_LOG_PRI +#define MPL_LOG_PRI(priority, tag, fmt, ...) \ + pr_debug(MPL_##priority tag fmt, ##__VA_ARGS__) +#endif + +/* + * Log macro that allows you to pass in a varargs ("args" is a va_list). + */ +#ifndef MPL_LOG_PRI_VA +/* not allowed in the Kernel because there is no dev_dbg that takes a va_list */ +#endif + +/* --------------------------------------------------------------------- */ + +/* + * =========================================================================== + * + * The stuff in the rest of this file should not be used directly. + */ + +int _MLPrintLog(int priority, const char *tag, const char *fmt, ...); +int _MLPrintVaLog(int priority, const char *tag, const char *fmt, va_list args); +/* Final implementation of actual writing to a character device */ +int _MLWriteLog(const char *buf, int buflen); + +static inline void __print_result_location(int result, + const char *file, + const char *func, int line) +{ + MPL_LOGE("%s|%s|%d returning %d\n", file, func, line, result); +} + +#define LOG_RESULT_LOCATION(condition) \ + do { \ + __print_result_location((int)(condition), __FILE__, \ + __func__, __LINE__); \ + } while (0) + + +#endif /* _LIBS_CUTILS_MPL_LOG_H */ diff --git a/drivers/misc/inv_mpu/mldl_print_cfg.c b/drivers/misc/inv_mpu/mldl_print_cfg.c new file mode 100644 index 0000000..8218824 --- /dev/null +++ b/drivers/misc/inv_mpu/mldl_print_cfg.c @@ -0,0 +1,131 @@ +/* + $License: + Copyright (C) 2011 InvenSense Corporation, All Rights Reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + $ + */ + +/** + * @addtogroup MLDL + * + * @{ + * @file mldl_print_cfg.c + * @brief The Motion Library Driver Layer. + */ + +#include <stddef.h> +#include "mldl_cfg.h" +#include "mlsl.h" +#include "linux/mpu.h" + + +void mldl_print_cfg(struct mldl_cfg *mldl_cfg) +{ + struct mpu_gyro_cfg *mpu_gyro_cfg = mldl_cfg->mpu_gyro_cfg; + struct mpu_offsets *mpu_offsets = mldl_cfg->mpu_offsets; + struct mpu_chip_info *mpu_chip_info = mldl_cfg->mpu_chip_info; + struct inv_mpu_cfg *inv_mpu_cfg = mldl_cfg->inv_mpu_cfg; + struct inv_mpu_state *inv_mpu_state = mldl_cfg->inv_mpu_state; + struct ext_slave_descr **slave = mldl_cfg->slave; + struct mpu_platform_data *pdata = mldl_cfg->pdata; + struct ext_slave_platform_data **pdata_slave = mldl_cfg->pdata_slave; + int ii; + + /* mpu_gyro_cfg */ + MPL_LOGD("int_config = %02x\n", mpu_gyro_cfg->int_config); + MPL_LOGD("ext_sync = %02x\n", mpu_gyro_cfg->ext_sync); + MPL_LOGD("full_scale = %02x\n", mpu_gyro_cfg->full_scale); + MPL_LOGD("lpf = %02x\n", mpu_gyro_cfg->lpf); + MPL_LOGD("clk_src = %02x\n", mpu_gyro_cfg->clk_src); + MPL_LOGD("divider = %02x\n", mpu_gyro_cfg->divider); + MPL_LOGD("dmp_enable = %02x\n", mpu_gyro_cfg->dmp_enable); + MPL_LOGD("fifo_enable = %02x\n", mpu_gyro_cfg->fifo_enable); + MPL_LOGD("dmp_cfg1 = %02x\n", mpu_gyro_cfg->dmp_cfg1); + MPL_LOGD("dmp_cfg2 = %02x\n", mpu_gyro_cfg->dmp_cfg2); + /* mpu_offsets */ + MPL_LOGD("tc[0] = %02x\n", mpu_offsets->tc[0]); + MPL_LOGD("tc[1] = %02x\n", mpu_offsets->tc[1]); + MPL_LOGD("tc[2] = %02x\n", mpu_offsets->tc[2]); + MPL_LOGD("gyro[0] = %04x\n", mpu_offsets->gyro[0]); + MPL_LOGD("gyro[1] = %04x\n", mpu_offsets->gyro[1]); + MPL_LOGD("gyro[2] = %04x\n", mpu_offsets->gyro[2]); + + /* mpu_chip_info */ + MPL_LOGD("addr = %02x\n", mldl_cfg->mpu_chip_info->addr); + + MPL_LOGD("silicon_revision = %02x\n", mpu_chip_info->silicon_revision); + MPL_LOGD("product_revision = %02x\n", mpu_chip_info->product_revision); + MPL_LOGD("product_id = %02x\n", mpu_chip_info->product_id); + MPL_LOGD("gyro_sens_trim = %02x\n", mpu_chip_info->gyro_sens_trim); + + MPL_LOGD("requested_sensors = %04x\n", inv_mpu_cfg->requested_sensors); + MPL_LOGD("ignore_system_suspend= %04x\n", + inv_mpu_cfg->ignore_system_suspend); + MPL_LOGD("status = %04x\n", inv_mpu_state->status); + MPL_LOGD("i2c_slaves_enabled= %04x\n", + inv_mpu_state->i2c_slaves_enabled); + + for (ii = 0; ii < EXT_SLAVE_NUM_TYPES; ii++) { + if (!slave[ii]) + continue; + MPL_LOGD("SLAVE %d:\n", ii); + MPL_LOGD(" suspend = %02x\n", (int)slave[ii]->suspend); + MPL_LOGD(" resume = %02x\n", (int)slave[ii]->resume); + MPL_LOGD(" read = %02x\n", (int)slave[ii]->read); + MPL_LOGD(" type = %02x\n", slave[ii]->type); + MPL_LOGD(" reg = %02x\n", slave[ii]->read_reg); + MPL_LOGD(" len = %02x\n", slave[ii]->read_len); + MPL_LOGD(" endian = %02x\n", slave[ii]->endian); + MPL_LOGD(" range.mantissa= %02x\n", + slave[ii]->range.mantissa); + MPL_LOGD(" range.fraction= %02x\n", + slave[ii]->range.fraction); + } + + for (ii = 0; ii < EXT_SLAVE_NUM_TYPES; ii++) { + if (!pdata_slave[ii]) + continue; + MPL_LOGD("PDATA_SLAVE[%d]\n", ii); + MPL_LOGD(" irq = %02x\n", pdata_slave[ii]->irq); + MPL_LOGD(" adapt_num = %02x\n", pdata_slave[ii]->adapt_num); + MPL_LOGD(" bus = %02x\n", pdata_slave[ii]->bus); + MPL_LOGD(" address = %02x\n", pdata_slave[ii]->address); + MPL_LOGD(" orientation=\n" + " %2d %2d %2d\n" + " %2d %2d %2d\n" + " %2d %2d %2d\n", + pdata_slave[ii]->orientation[0], + pdata_slave[ii]->orientation[1], + pdata_slave[ii]->orientation[2], + pdata_slave[ii]->orientation[3], + pdata_slave[ii]->orientation[4], + pdata_slave[ii]->orientation[5], + pdata_slave[ii]->orientation[6], + pdata_slave[ii]->orientation[7], + pdata_slave[ii]->orientation[8]); + } + + MPL_LOGD("pdata->int_config = %02x\n", pdata->int_config); + MPL_LOGD("pdata->level_shifter = %02x\n", pdata->level_shifter); + MPL_LOGD("pdata->orientation =\n" + " %2d %2d %2d\n" + " %2d %2d %2d\n" + " %2d %2d %2d\n", + pdata->orientation[0], pdata->orientation[1], + pdata->orientation[2], pdata->orientation[3], + pdata->orientation[4], pdata->orientation[5], + pdata->orientation[6], pdata->orientation[7], + pdata->orientation[8]); +} diff --git a/drivers/misc/inv_mpu/mldl_print_cfg.h b/drivers/misc/inv_mpu/mldl_print_cfg.h new file mode 100644 index 0000000..2e19114 --- /dev/null +++ b/drivers/misc/inv_mpu/mldl_print_cfg.h @@ -0,0 +1,38 @@ +/* + $License: + Copyright (C) 2011 InvenSense Corporation, All Rights Reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + $ + */ + +/** + * @defgroup + * @brief + * + * @{ + * @file mldl_print_cfg.h + * @brief + * + * + */ +#ifndef __MLDL_PRINT_CFG__ +#define __MLDL_PRINT_CFG__ + +#include "mldl_cfg.h" + + +void mldl_print_cfg(struct mldl_cfg *mldl_cfg); + +#endif /* __MLDL_PRINT_CFG__ */ diff --git a/drivers/misc/inv_mpu/mltypes.h b/drivers/misc/inv_mpu/mltypes.h new file mode 100644 index 0000000..2abb215 --- /dev/null +++ b/drivers/misc/inv_mpu/mltypes.h @@ -0,0 +1,226 @@ +/* + $License: + Copyright (C) 2011 InvenSense Corporation, All Rights Reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + $ + */ + +/** + * @defgroup MLERROR + * @brief Motion Library - Error definitions. + * Definition of the error codes used within the MPL and + * returned to the user. + * Every function tries to return a meaningful error code basing + * on the occuring error condition. The error code is numeric. + * + * The available error codes and their associated values are: + * - (0) INV_SUCCESS + * - (1) INV_ERROR + * - (2) INV_ERROR_INVALID_PARAMETER + * - (3) INV_ERROR_FEATURE_NOT_ENABLED + * - (4) INV_ERROR_FEATURE_NOT_IMPLEMENTED + * - (6) INV_ERROR_DMP_NOT_STARTED + * - (7) INV_ERROR_DMP_STARTED + * - (8) INV_ERROR_NOT_OPENED + * - (9) INV_ERROR_OPENED + * - (10) INV_ERROR_INVALID_MODULE + * - (11) INV_ERROR_MEMORY_EXAUSTED + * - (12) INV_ERROR_DIVIDE_BY_ZERO + * - (13) INV_ERROR_ASSERTION_FAILURE + * - (14) INV_ERROR_FILE_OPEN + * - (15) INV_ERROR_FILE_READ + * - (16) INV_ERROR_FILE_WRITE + * - (17) INV_ERROR_INVALID_CONFIGURATION + * - (20) INV_ERROR_SERIAL_CLOSED + * - (21) INV_ERROR_SERIAL_OPEN_ERROR + * - (22) INV_ERROR_SERIAL_READ + * - (23) INV_ERROR_SERIAL_WRITE + * - (24) INV_ERROR_SERIAL_DEVICE_NOT_RECOGNIZED + * - (25) INV_ERROR_SM_TRANSITION + * - (26) INV_ERROR_SM_IMPROPER_STATE + * - (30) INV_ERROR_FIFO_OVERFLOW + * - (31) INV_ERROR_FIFO_FOOTER + * - (32) INV_ERROR_FIFO_READ_COUNT + * - (33) INV_ERROR_FIFO_READ_DATA + * - (40) INV_ERROR_MEMORY_SET + * - (50) INV_ERROR_LOG_MEMORY_ERROR + * - (51) INV_ERROR_LOG_OUTPUT_ERROR + * - (60) INV_ERROR_OS_BAD_PTR + * - (61) INV_ERROR_OS_BAD_HANDLE + * - (62) INV_ERROR_OS_CREATE_FAILED + * - (63) INV_ERROR_OS_LOCK_FAILED + * - (70) INV_ERROR_COMPASS_DATA_OVERFLOW + * - (71) INV_ERROR_COMPASS_DATA_UNDERFLOW + * - (72) INV_ERROR_COMPASS_DATA_NOT_READY + * - (73) INV_ERROR_COMPASS_DATA_ERROR + * - (75) INV_ERROR_CALIBRATION_LOAD + * - (76) INV_ERROR_CALIBRATION_STORE + * - (77) INV_ERROR_CALIBRATION_LEN + * - (78) INV_ERROR_CALIBRATION_CHECKSUM + * - (79) INV_ERROR_ACCEL_DATA_OVERFLOW + * - (80) INV_ERROR_ACCEL_DATA_UNDERFLOW + * - (81) INV_ERROR_ACCEL_DATA_NOT_READY + * - (82) INV_ERROR_ACCEL_DATA_ERROR + * + * @{ + * @file mltypes.h + * @} + */ + +#ifndef MLTYPES_H +#define MLTYPES_H + +#include <linux/types.h> +#include <asm-generic/errno-base.h> + + + + +/*--------------------------- + * ML Defines + *--------------------------*/ + +#ifndef NULL +#define NULL 0 +#endif + +/* - ML Errors. - */ +#define ERROR_NAME(x) (#x) +#define ERROR_CHECK_FIRST(first, x) \ + { if (INV_SUCCESS == first) first = x; } + +#define INV_SUCCESS (0) +/* Generic Error code. Proprietary Error Codes only */ +#define INV_ERROR_BASE (0x20) +#define INV_ERROR (INV_ERROR_BASE) + +/* Compatibility and other generic error codes */ +#define INV_ERROR_INVALID_PARAMETER (EINVAL) +#define INV_ERROR_FEATURE_NOT_ENABLED (EPERM) +#define INV_ERROR_FEATURE_NOT_IMPLEMENTED (INV_ERROR_BASE + 4) +#define INV_ERROR_DMP_NOT_STARTED (INV_ERROR_BASE + 6) +#define INV_ERROR_DMP_STARTED (INV_ERROR_BASE + 7) +#define INV_ERROR_NOT_OPENED (INV_ERROR_BASE + 8) +#define INV_ERROR_OPENED (INV_ERROR_BASE + 9) +#define INV_ERROR_INVALID_MODULE (ENODEV) +#define INV_ERROR_MEMORY_EXAUSTED (ENOMEM) +#define INV_ERROR_DIVIDE_BY_ZERO (INV_ERROR_BASE + 12) +#define INV_ERROR_ASSERTION_FAILURE (INV_ERROR_BASE + 13) +#define INV_ERROR_FILE_OPEN (INV_ERROR_BASE + 14) +#define INV_ERROR_FILE_READ (INV_ERROR_BASE + 15) +#define INV_ERROR_FILE_WRITE (INV_ERROR_BASE + 16) +#define INV_ERROR_INVALID_CONFIGURATION (INV_ERROR_BASE + 17) + +/* Serial Communication */ +#define INV_ERROR_SERIAL_CLOSED (INV_ERROR_BASE + 20) +#define INV_ERROR_SERIAL_OPEN_ERROR (INV_ERROR_BASE + 21) +#define INV_ERROR_SERIAL_READ (INV_ERROR_BASE + 22) +#define INV_ERROR_SERIAL_WRITE (INV_ERROR_BASE + 23) +#define INV_ERROR_SERIAL_DEVICE_NOT_RECOGNIZED (INV_ERROR_BASE + 24) + +/* SM = State Machine */ +#define INV_ERROR_SM_TRANSITION (INV_ERROR_BASE + 25) +#define INV_ERROR_SM_IMPROPER_STATE (INV_ERROR_BASE + 26) + +/* Fifo */ +#define INV_ERROR_FIFO_OVERFLOW (INV_ERROR_BASE + 30) +#define INV_ERROR_FIFO_FOOTER (INV_ERROR_BASE + 31) +#define INV_ERROR_FIFO_READ_COUNT (INV_ERROR_BASE + 32) +#define INV_ERROR_FIFO_READ_DATA (INV_ERROR_BASE + 33) + +/* Memory & Registers, Set & Get */ +#define INV_ERROR_MEMORY_SET (INV_ERROR_BASE + 40) + +#define INV_ERROR_LOG_MEMORY_ERROR (INV_ERROR_BASE + 50) +#define INV_ERROR_LOG_OUTPUT_ERROR (INV_ERROR_BASE + 51) + +/* OS interface errors */ +#define INV_ERROR_OS_BAD_PTR (INV_ERROR_BASE + 60) +#define INV_ERROR_OS_BAD_HANDLE (INV_ERROR_BASE + 61) +#define INV_ERROR_OS_CREATE_FAILED (INV_ERROR_BASE + 62) +#define INV_ERROR_OS_LOCK_FAILED (INV_ERROR_BASE + 63) + +/* Compass errors */ +#define INV_ERROR_COMPASS_DATA_OVERFLOW (INV_ERROR_BASE + 70) +#define INV_ERROR_COMPASS_DATA_UNDERFLOW (INV_ERROR_BASE + 71) +#define INV_ERROR_COMPASS_DATA_NOT_READY (INV_ERROR_BASE + 72) +#define INV_ERROR_COMPASS_DATA_ERROR (INV_ERROR_BASE + 73) + +/* Load/Store calibration */ +#define INV_ERROR_CALIBRATION_LOAD (INV_ERROR_BASE + 75) +#define INV_ERROR_CALIBRATION_STORE (INV_ERROR_BASE + 76) +#define INV_ERROR_CALIBRATION_LEN (INV_ERROR_BASE + 77) +#define INV_ERROR_CALIBRATION_CHECKSUM (INV_ERROR_BASE + 78) + +/* Accel errors */ +#define INV_ERROR_ACCEL_DATA_OVERFLOW (INV_ERROR_BASE + 79) +#define INV_ERROR_ACCEL_DATA_UNDERFLOW (INV_ERROR_BASE + 80) +#define INV_ERROR_ACCEL_DATA_NOT_READY (INV_ERROR_BASE + 81) +#define INV_ERROR_ACCEL_DATA_ERROR (INV_ERROR_BASE + 82) + +#ifdef INV_USE_LEGACY_NAMES +#define ML_SUCCESS INV_SUCCESS +#define ML_ERROR INV_ERROR +#define ML_ERROR_INVALID_PARAMETER INV_ERROR_INVALID_PARAMETER +#define ML_ERROR_FEATURE_NOT_ENABLED INV_ERROR_FEATURE_NOT_ENABLED +#define ML_ERROR_FEATURE_NOT_IMPLEMENTED INV_ERROR_FEATURE_NOT_IMPLEMENTED +#define ML_ERROR_DMP_NOT_STARTED INV_ERROR_DMP_NOT_STARTED +#define ML_ERROR_DMP_STARTED INV_ERROR_DMP_STARTED +#define ML_ERROR_NOT_OPENED INV_ERROR_NOT_OPENED +#define ML_ERROR_OPENED INV_ERROR_OPENED +#define ML_ERROR_INVALID_MODULE INV_ERROR_INVALID_MODULE +#define ML_ERROR_MEMORY_EXAUSTED INV_ERROR_MEMORY_EXAUSTED +#define ML_ERROR_DIVIDE_BY_ZERO INV_ERROR_DIVIDE_BY_ZERO +#define ML_ERROR_ASSERTION_FAILURE INV_ERROR_ASSERTION_FAILURE +#define ML_ERROR_FILE_OPEN INV_ERROR_FILE_OPEN +#define ML_ERROR_FILE_READ INV_ERROR_FILE_READ +#define ML_ERROR_FILE_WRITE INV_ERROR_FILE_WRITE +#define ML_ERROR_INVALID_CONFIGURATION INV_ERROR_INVALID_CONFIGURATION +#define ML_ERROR_SERIAL_CLOSED INV_ERROR_SERIAL_CLOSED +#define ML_ERROR_SERIAL_OPEN_ERROR INV_ERROR_SERIAL_OPEN_ERROR +#define ML_ERROR_SERIAL_READ INV_ERROR_SERIAL_READ +#define ML_ERROR_SERIAL_WRITE INV_ERROR_SERIAL_WRITE +#define ML_ERROR_SERIAL_DEVICE_NOT_RECOGNIZED \ + INV_ERROR_SERIAL_DEVICE_NOT_RECOGNIZED +#define ML_ERROR_SM_TRANSITION INV_ERROR_SM_TRANSITION +#define ML_ERROR_SM_IMPROPER_STATE INV_ERROR_SM_IMPROPER_STATE +#define ML_ERROR_FIFO_OVERFLOW INV_ERROR_FIFO_OVERFLOW +#define ML_ERROR_FIFO_FOOTER INV_ERROR_FIFO_FOOTER +#define ML_ERROR_FIFO_READ_COUNT INV_ERROR_FIFO_READ_COUNT +#define ML_ERROR_FIFO_READ_DATA INV_ERROR_FIFO_READ_DATA +#define ML_ERROR_MEMORY_SET INV_ERROR_MEMORY_SET +#define ML_ERROR_LOG_MEMORY_ERROR INV_ERROR_LOG_MEMORY_ERROR +#define ML_ERROR_LOG_OUTPUT_ERROR INV_ERROR_LOG_OUTPUT_ERROR +#define ML_ERROR_OS_BAD_PTR INV_ERROR_OS_BAD_PTR +#define ML_ERROR_OS_BAD_HANDLE INV_ERROR_OS_BAD_HANDLE +#define ML_ERROR_OS_CREATE_FAILED INV_ERROR_OS_CREATE_FAILED +#define ML_ERROR_OS_LOCK_FAILED INV_ERROR_OS_LOCK_FAILED +#define ML_ERROR_COMPASS_DATA_OVERFLOW INV_ERROR_COMPASS_DATA_OVERFLOW +#define ML_ERROR_COMPASS_DATA_UNDERFLOW INV_ERROR_COMPASS_DATA_UNDERFLOW +#define ML_ERROR_COMPASS_DATA_NOT_READY INV_ERROR_COMPASS_DATA_NOT_READY +#define ML_ERROR_COMPASS_DATA_ERROR INV_ERROR_COMPASS_DATA_ERROR +#define ML_ERROR_CALIBRATION_LOAD INV_ERROR_CALIBRATION_LOAD +#define ML_ERROR_CALIBRATION_STORE INV_ERROR_CALIBRATION_STORE +#define ML_ERROR_CALIBRATION_LEN INV_ERROR_CALIBRATION_LEN +#define ML_ERROR_CALIBRATION_CHECKSUM INV_ERROR_CALIBRATION_CHECKSUM +#define ML_ERROR_ACCEL_DATA_OVERFLOW INV_ERROR_ACCEL_DATA_OVERFLOW +#define ML_ERROR_ACCEL_DATA_UNDERFLOW INV_ERROR_ACCEL_DATA_UNDERFLOW +#define ML_ERROR_ACCEL_DATA_NOT_READY INV_ERROR_ACCEL_DATA_NOT_READY +#define ML_ERROR_ACCEL_DATA_ERROR INV_ERROR_ACCEL_DATA_ERROR +#endif + +/* For Linux coding compliance */ + +#endif /* MLTYPES_H */ -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
