Hi Tony, Samuel,
Would you have time to take a look at this series?
Thanks,
Péter
On Tuesday 21 June 2011 15:38:58 Ujfalusi, Peter wrote:
> Hello,
>
> Changes since v5:
> - Use alloc_workqueue in the twl6040-vibra driver (comment from Tejun Heo)
> - Allow user to change the headset power mode, but if the change is not
> allowed by the use case the change is not written to the HW (comment from
> Mark Brown)
>
> Mark: I have added your acks for the patches, except for patch 15, where you
> requested a change.
>
> Intro message from the v5 series:
> The series will do five major things, and they are in one series, because
> they pretty much depending on each other, so it is easier to handle them
> together.
>
> 1. Move the common pmic related configurations out from the board files.
> New twl-common.c/h file has been created for this purpose.
> OMAP3 board files received two patches (pdata, and regualtor changes), OMAP4
> board files has been changed with one patch.
>
> 2. Rename the twl4030-codec MFD driver to twl4030-audio
> Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec MFD
> dirver had been using twl4030-audio to register (twl4030-codec is the ASoC
> codec driver). The documentation refers to this part of twl as audio block,
> so it is better to rename the driver as well to avoid confusion.
>
> 3. Introduction of MFD driver for twl6040.
> The TWL6040 audio IC has codec and vibra functionality.
> Convert the existing ASoC codec driver to use the new MFD driver's
> interface.
>
> 4. Vibrator driver for TWL6040 (Input/ForceFeedback driver)
> The driver itself, and support for the vibrators in SDP4430 board.
>
> 5. Updates for twl6040 ASoC codec driver
> HS ramp configuration, new ABE dais, updated sample rate constraints,
> SDP4430 configuration.
>
> Regards,
> Peter
>
> ---
> Axel Castaneda Gonzalez (1):
> ASoC: twl6040: Configure ramp step based on platform
>
> Liam Girdwood (3):
> ASoC: twl6040: add all ABE DAIs
> ASoC: twl6040: Support other sample rates in constraints.
> ASoC: twl6040: set default constraints.
>
> Misael Lopez Cruz (5):
> mfd: twl6040: Add initial support
> ASoC: twl6040: Convert into TWL6040 MFD child
> input: Add initial support for TWL6040 vibrator
> ASoC: twl6040: Remove pll and headset mode dependency
> OMAP4: SDP4430: Add twl6040 codec platform support
>
> Peter Ujfalusi (9):
> OMAP: New twl-common for common TWL configuration
> OMAP4: Move common twl6030 configuration to twl-common
> OMAP3: Move common twl configuration to twl-common
> OMAP3: Move common regulator configuration to twl-common
> MFD: twl4030-codec: Rename internals from codec to audio
> MFD: twl4030-codec -> twl4030-audio: Rename the driver
> MFD: twl4030-audio: Rename platform data
> MFD: twl6040: Change platform data for soc codec driver
> OMAP4: SDP4430: Add twl6040 vibrator platform support
>
> arch/arm/mach-omap2/Makefile | 2 +-
> arch/arm/mach-omap2/board-3430sdp.c | 89 +---
> arch/arm/mach-omap2/board-4430sdp.c | 187 ++----
> arch/arm/mach-omap2/board-cm-t35.c | 48 +--
> arch/arm/mach-omap2/board-devkit8000.c | 37 +--
> arch/arm/mach-omap2/board-igep0020.c | 44 +--
> arch/arm/mach-omap2/board-ldp.c | 15 +-
> arch/arm/mach-omap2/board-omap3beagle.c | 60 +--
> arch/arm/mach-omap2/board-omap3evm.c | 67 +--
> arch/arm/mach-omap2/board-omap3pandora.c | 59 +--
> arch/arm/mach-omap2/board-omap3stalker.c | 70 +--
> arch/arm/mach-omap2/board-omap3touchbook.c | 57 +--
> arch/arm/mach-omap2/board-omap4panda.c | 149 +-----
> arch/arm/mach-omap2/board-overo.c | 59 +--
> arch/arm/mach-omap2/board-rm680.c | 8 +-
> arch/arm/mach-omap2/board-rx51-peripherals.c | 44 +--
> arch/arm/mach-omap2/board-zoom-peripherals.c | 88 +---
> arch/arm/mach-omap2/common-board-devices.c | 21 -
> arch/arm/mach-omap2/common-board-devices.h | 26 +-
> arch/arm/mach-omap2/twl-common.c | 304 ++++++++++
> arch/arm/mach-omap2/twl-common.h | 59 ++
> arch/arm/plat-omap/include/plat/irqs.h | 12 +-
> drivers/input/misc/Kconfig | 13 +-
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/twl4030-vibra.c | 12 +-
> drivers/input/misc/twl6040-vibra.c | 416 +++++++++++++
> drivers/mfd/Kconfig | 8 +-
> drivers/mfd/Makefile | 3 +-
> drivers/mfd/twl-core.c | 13 +-
> drivers/mfd/twl4030-audio.c | 277 +++++++++
> drivers/mfd/twl4030-codec.c | 277 ---------
> drivers/mfd/twl6040-core.c | 601
> +++++++++++++++++++ drivers/mfd/twl6040-irq.c |
> 205 +++++++ include/linux/i2c/twl.h | 25 +-
> .../linux/mfd/{twl4030-codec.h => twl4030-audio.h} | 16 +-
> include/linux/mfd/twl6040.h | 261 ++++++++
> sound/soc/codecs/Kconfig | 3 +-
> sound/soc/codecs/twl4030.c | 22 +-
> sound/soc/codecs/twl6040.c | 628
> ++++++++------------ sound/soc/codecs/twl6040.h |
> 118 ----
> sound/soc/omap/sdp3430.c | 2 +-
> sound/soc/omap/sdp4430.c | 2 +
> sound/soc/omap/zoom2.c | 2 +-
> 43 files changed, 2635 insertions(+), 1775 deletions(-)
> create mode 100644 arch/arm/mach-omap2/twl-common.c
> create mode 100644 arch/arm/mach-omap2/twl-common.h
> create mode 100644 drivers/input/misc/twl6040-vibra.c
> create mode 100644 drivers/mfd/twl4030-audio.c
> delete mode 100644 drivers/mfd/twl4030-codec.c
> create mode 100644 drivers/mfd/twl6040-core.c
> create mode 100644 drivers/mfd/twl6040-irq.c
> rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%)
> create mode 100644 include/linux/mfd/twl6040.h
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
