On Tue, Jun 21, 2011 at 12:55 AM, David Jander <david.jander@xxxxxxxxxxx> wrote: > On Mon, 20 Jun 2011 12:20:30 -0600 > Grant Likely <grant.likely@xxxxxxxxxxxx> wrote: > >> On Mon, Jun 20, 2011 at 11:03 AM, H Hartley Sweeten >> <hartleys@xxxxxxxxxxxxxxxxxxx> wrote: >> > On Saturday, June 18, 2011 6:18 AM, Grant Likely wrote: >> >> On Sat, Jun 18, 2011 at 4:17 AM, Dmitry Torokhov wrote: >> >>> On Thu, Jun 16, 2011 at 01:27:32PM -0600, Grant Likely wrote: >> >>>> On Tue, Jun 14, 2011 at 11:08:11AM +0200, David Jander wrote: >> >>>>> Use a threaded interrupt handler in order to permit the handler to use >> >>>>> a GPIO driver that causes things like I2C transactions being done >> >>>>> inside the handler context. >> >>>>> Also, gpio_keys_init needs to be declared as a late_initcall, to make >> >>>>> sure all needed GPIO drivers have been loaded if the drivers are built >> >>>>> into the kernel. >> >>>> >> >>>> ...which is a horrid hack, but until device dependencies can be >> >>>> described, it isn't one that can be solved easily. >> >>>> >> >>> >> >>> I really do not want to apply this... Currently the order of >> >>> initialization does not matter since nothing actually happens until >> >>> corresponding device appears on the bus. Does the OF code creates >> >>> devices before all resources are ready? >> >> >> >> It's not an OF problem. The problem is that all the platform_devices >> >> typically get registered all at once at machine_init time (on arm), >> >> and if the gpio expander isn't a platform_device, (like an i2c gpio >> >> expander which would end up being a child of a platform_device), then >> >> it won't be ready. The real problem is that we have no mechanism for >> >> holding off or deferring a driver probe if it depends on an >> >> asynchronous resource. >> > >> > To avoid the registration order issue, isn't the proper fix to use a >> > "setup" method in the gpio expander driver? The gpio-pca953x.c driver has >> > this and I use it to hook the gpio_keys driver to those gpios. The >> > registration order ends up being: >> > >> > i2c-gpio as a platform_device in the machine init code >> > pca9539 as part of the i2c_board_info for the i2c-gpio device >> > gpio-keys as a platform_device via the .setup callback of pca9539 >> >> Blech! That approach fell out of the ugly tree and hit every branch >> on the way down! Points for creativity though. :-) Essentially that >> ends up being a driver-specific notifier implementation. >> >> Yes, that works, but to me it just highlights a deficiency in the >> Linux device model. > > Especially, how would I specify this setup handler in a device-tree? You wouldn't. Notifiers (and the above poor-man's notifier) only works for specific cases in traditional board support code. There isn't a good pattern for using it with DT data. You'd have to make of_platform_populate() parse every node for any properties containing a phandle it recognizes (assuming you can know whether the resource is actually needed for the device to operate) and keep track of which devices should not be registered because other devices haven't been bound to drivers yet. Then you need to have a notifier that looks for those resources showing up, and registers the deferred device. > The DT > compiler still has no support for something like embedded DT-script ;-) We're not going there. g. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
