>>>>> "Benjamin" == Benjamin Tissoires <benjamin.tissoires@xxxxxxx> writes: Hi, Benjamin> your device presents Contact ID, Tip Switch, In Range and Benjamin> Confidence. I would say that Win 7 would treat it as a Benjamin> multitouch screen, so this might work with Benjamin> hid-multitouch. Please note that's the first time I see a Benjamin> report descriptor with only one touch reported for a Benjamin> multitouch screen. Benjamin> For the configuration, the device may emulate a mouse by Benjamin> default, and hid-multitouch is able to switch to the Benjamin> multitouch mode. You will loose the right click, but it can Benjamin> be enabled in gnome at least (accessibility settings). Benjamin> Can you just replace in hid-ids.h: Benjamin> - #define USB_DEVICE_ID_CRYSTALTOUCH 0x0006 Benjamin> + #define USB_DEVICE_ID_CRYSTALTOUCH 0x0005 Benjamin> and see if it's working? If you prefer, I can make a new Benjamin> patch, but I'll need to know which kernel you are running Benjamin> (tree and branch). A 2.6.39 and above would be great. I'm on 2.6.39. The patch doesn't apply cleanly, but I've fixed it up manually (http://peter.korsgaard.com/lumio-2.6.29.patch). hid-multitouch does get loaded, and everything looks OK: usb 2-1.1: new full speed USB device number 4 using uhci_hcd hid-multitouch 0003:202E:0005.0008: hiddev0: USB HID v1.10 Device [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input0 input: LUMIO Inc LUMIO CrystalTouch ver 1.1C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input18 hid-multitouch 0003:202E:0005.0009: input: USB HID v1.11 Keyboard [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input1 input: LUMIO Inc LUMIO CrystalTouch ver 1.1C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input19 hid-multitouch 0003:202E:0005.000A: input: USB HID v1.11 Mouse [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input2 input: LUMIO Inc LUMIO CrystalTouch ver 1.1C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input20 hid-multitouch 0003:202E:0005.000B: input: USB HID v1.11 Device [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input3 Evdev output is also different, but it doesn't seem to ever generate any events when I touch the screen. Before I had: I: Bus=0003 Vendor=202e Product=0005 Version=0111 N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C" P: Phys=usb-0000:00:1d.0-1.1/input1 S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input28 U: Uniq= H: Handlers=mac-button-emul sysrq kbd event16 B: PROP=0 B: EV=100013 B: KEY=e080ffdf01cfffff fffffffffffffffe B: MSC=10 I: Bus=0003 Vendor=202e Product=0005 Version=0111 N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C" P: Phys=usb-0000:00:1d.0-1.1/input2 S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input29 U: Uniq= H: Handlers=mac-button-emul event17 B: PROP=0 B: EV=1f B: KEY=70000 0 0 0 0 B: REL=200 B: ABS=3 B: MSC=10 I: Bus=0003 Vendor=202e Product=0005 Version=0111 N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C" P: Phys=usb-0000:00:1d.0-1.1/input3 S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input30 U: Uniq= H: Handlers=mac-button-emul event18 B: PROP=0 B: EV=1b B: KEY=420 1 0 0 0 0 B: ABS=10000000003 B: MSC=10 With event16 + event18 never generating any events, and event17 giving: Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x202e product 0x5 version 0x111 Input device name: "LUMIO Inc LUMIO CrystalTouch ver 1.1C" Supported events: Event type 0 (Sync) Event type 1 (Key) Event code 272 (LeftBtn) Event code 273 (RightBtn) Event code 274 (MiddleBtn) Event type 2 (Relative) Event code 9 (Misc) Event type 3 (Absolute) Event code 0 (X) Value 650 Min 0 Max 4095 Event code 1 (Y) Value 3221 Min 0 Max 4095 Event type 4 (Misc) Event code 4 (ScanCode) Testing ... (interrupt to exit) Event: time 1305882024.934011, type 4 (Misc), code 4 (ScanCode), value 90001 Event: time 1305882024.934017, type 1 (Key), code 272 (LeftBtn), value 1 Event: time 1305882024.934029, type 3 (Absolute), code 0 (X), value 270 Event: time 1305882024.934034, type 3 (Absolute), code 1 (Y), value 1513 Event: time 1305882024.934039, type 2 (Relative), code 9 (Misc), value 1 Event: time 1305882024.934043, -------------- Report Sync ------------ Event: time 1305882024.943019, type 2 (Relative), code 9 (Misc), value 1 Event: time 1305882024.943025, -------------- Report Sync ------------ Event: time 1305882024.951998, type 3 (Absolute), code 0 (X), value 275 Event: time 1305882024.952006, type 3 (Absolute), code 1 (Y), value 1519 Event: time 1305882024.952010, type 2 (Relative), code 9 (Misc), value 1 Event: time 1305882024.952014, -------------- Report Sync ------------ Now with hid-multitouch I have: I: Bus=0003 Vendor=202e Product=0005 Version=0111 N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C" P: Phys=usb-0000:00:1d.0-1.1/input1 S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input18 U: Uniq= H: Handlers=mac-button-emul event16 B: PROP=0 B: EV=100003 B: KEY=0 I: Bus=0003 Vendor=202e Product=0005 Version=0111 N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C" P: Phys=usb-0000:00:1d.0-1.1/input2 S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input19 U: Uniq= H: Handlers=mac-button-emul event17 B: PROP=0 B: EV=b B: KEY=0 B: ABS=60000000000003 I: Bus=0003 Vendor=202e Product=0005 Version=0111 N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C" P: Phys=usb-0000:00:1d.0-1.1/input3 S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input20 U: Uniq= H: Handlers=mac-button-emul event18 B: PROP=0 B: EV=b B: KEY=400 0 0 0 0 0 B: ABS=60000000000003 And event17: Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x202e product 0x5 version 0x111 Input device name: "LUMIO Inc LUMIO CrystalTouch ver 1.1C" Supported events: Event type 0 (Sync) Event type 1 (Key) Event type 3 (Absolute) Event code 0 (X) Value 0 Min 0 Max 4095 Event code 1 (Y) Value 0 Min 0 Max 4095 Event code 53 (?) Value 0 Min 0 Max 4095 Event code 54 (?) Value 0 Min 0 Max 4095 Testing ... (interrupt to exit) Event: time 1305886175.641112, -------------- Report Sync ------------ And then nothing. Any idea about how to progress? -- Bye, Peter Korsgaard -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
