On Thu, May 12, 2011 at 02:24:59AM -0400, simon@xxxxxxxxxxxxx wrote: > > This patch adds a driver for the Nintendo Nunchuck (wiimote accessory) > > attached to an i2c bus via something like a wiichuck adapter board > > from Sparkfun. > > > > I have not tested your driver, will try to find some time next week. > > There are also a handful of devices which can be connected as such: > http://www.wiibrew.org/wiki/Wiimote/Extension_Controllers > > You might want to consider the possibility that the Nunchuck/Others are > connected via a MotionPlus, in which case the data is interleaved with > Gyro data. > > Simon. > > PS. If you're really cheap you can (ab)use the I2C DDC link of the VGA > port to connect devices.... it's what I do :-) Heh. I've actually got it wired up to the i2c bus on a BeagleBoard from TI. I've got a new version of the driver which I'll post when I get back home and have a chance to properly test it. I've implemented Nunchuck and Classic Controller support so I could play with implementing multiple protocols in a clean way (even though I don't actually have a classic controller yet). Motion Plus should be straight forward to add, but I'll probably leave that as an exercise for somebody else. g. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
