Am Donnerstag, 5. Mai 2011, 11:08:18 schrieb Jonathan Cameron: > On 05/05/11 09:32, Alexander Stein wrote: > > Just set vref_mv in your platform config to use external vref. Otherwise > > the internal one is used. > > Would be nicer to see this done with the regulator framework. But then if > you have a use case on a board where that isn't available, then fair > enough. Well, for the regulator framework I would redesign the driver a bit. Currently the analogue inputs are displayed as mV in sysfs. If the current analogue input voltage is shown via the regulator framework the ads7846 driver itself can shows the actual ADC values. The latter ones don't need to know the reference voltage. But I think this is a different problem than choosing the reference voltage for an ADC for what this patch is for. Alexander -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
