[PATCH v4] input: keyboard: FSL MPR121 capacitive touch button.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds basic support for Freescale MPR121 capacitive touch
sensor.
It's an i2c controller with up to 12 capacitance sensing inputs.

Product information (data sheet, application notes) can be found here:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121

Signed-off-by: Zhang Jiejing <jiejing.zhang@xxxxxxxxxxxxx>
---
Changes since v3:
1. spell fixs.
Changes since v2:
1. remove a endif in Kconfig
2. comments style align
Changes since v1:
1. change files name from mpr121.c to mpr121_touchkey.c
2. lots of typo fix, thanks to Christoph Fritz
3. correct data declear function.
4. fix report MSC_SCAN to report key_num
5. remove print
6. use matrix_keypad_data in platform_data
7. move register define into .c file rather than header file.
---
 drivers/input/keyboard/Kconfig           |   12 +
 drivers/input/keyboard/Makefile          |    1 +
 drivers/input/keyboard/mpr121_touchkey.c |  330 ++++++++++++++++++++++++++++++
 include/linux/i2c/mpr.h                  |   19 ++
 4 files changed, 362 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/keyboard/mpr121_touchkey.c
 create mode 100644 include/linux/i2c/mpr.h

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c7a9202..af43f95 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -315,6 +315,18 @@ config KEYBOARD_MCS
 	  To compile this driver as a module, choose M here: the
 	  module will be called mcs_touchkey.
 
+config KEYBOARD_MPR121
+	tristate "Freescale MPR121 Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have Freescale MPR121 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mpr121_touchkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 468c627..37fa96b 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
+obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
new file mode 100644
index 0000000..f3fc0f4
--- /dev/null
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -0,0 +1,330 @@
+/*
+ * Touchkey driver for Freescale MPR121 Controllor
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Zhang Jiejing <jiejing.zhang@xxxxxxxxxxxxx>
+ *
+ * Based on mcs_touchkey.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mpr.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+/* Register definitions */
+#define ELE_TOUCH_STATUS_0_ADDR	0x0
+#define ELE_TOUCH_STATUS_1_ADDR	0X1
+#define MHD_RISING_ADDR		0x2b
+#define NHD_RISING_ADDR		0x2c
+#define NCL_RISING_ADDR		0x2d
+#define FDL_RISING_ADDR		0x2e
+#define MHD_FALLING_ADDR	0x2f
+#define NHD_FALLING_ADDR	0x30
+#define NCL_FALLING_ADDR	0x31
+#define FDL_FALLING_ADDR	0x32
+#define ELE0_TOUCH_THRESHOLD_ADDR	0x41
+#define ELE0_RELEASE_THRESHOLD_ADDR	0x42
+#define AFE_CONF_ADDR			0x5c
+#define FILTER_CONF_ADDR		0x5d
+
+/* ELECTRODE_CONF_ADDR: This register mainly configures the number of
+ * enabled capacitance sensing inputs and its run/suspend mode. */
+#define ELECTRODE_CONF_ADDR		0x5e
+#define AUTO_CONFIG_CTRL_ADDR		0x7b
+#define AUTO_CONFIG_USL_ADDR		0x7d
+#define AUTO_CONFIG_LSL_ADDR		0x7e
+#define AUTO_CONFIG_TL_ADDR		0x7f
+
+/* Threshold of touch/release trigger */
+#define TOUCH_THRESHOLD			0x0f
+#define RELEASE_THRESHOLD		0x0a
+/* Masks for touch and release triggers */
+#define TOUCH_STATUS_MASK		0xfff
+/* MPR121 have 12 keys */
+#define MPR121_MAX_KEY_COUNT		12
+
+struct mpr121_touchkey {
+	struct i2c_client	*client;
+	struct input_dev	*input_dev;
+	unsigned int		key_val;
+	int			statusbits;
+	int			keycount;
+	u16			keycodes[MPR121_MAX_KEY_COUNT];
+};
+
+struct mpr121_init_register {
+	int addr;
+	u8 val;
+};
+
+static const
+struct mpr121_init_register init_reg_table[] __devinitconst = {
+	{MHD_RISING_ADDR,	0x1},
+	{NHD_RISING_ADDR,	0x1},
+	{MHD_FALLING_ADDR,	0x1},
+	{NHD_FALLING_ADDR,	0x1},
+	{NCL_FALLING_ADDR,	0xff},
+	{FDL_FALLING_ADDR,	0x02},
+	{FILTER_CONF_ADDR,	0x04},
+	{AFE_CONF_ADDR,		0x0b},
+	{AUTO_CONFIG_CTRL_ADDR, 0x0b},
+};
+
+static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mpr121_touchkey *mpr121 = dev_id;
+	struct i2c_client *client = mpr121->client;
+	struct input_dev *input = mpr121->input_dev;
+	unsigned int key_num, pressed;
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
+	if (reg < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", reg);
+		goto out;
+	}
+
+	reg <<= 8;
+	reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
+	if (reg < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", reg);
+		goto out;
+	}
+
+	reg &= TOUCH_STATUS_MASK;
+	/* use old press bit to figure out which bit changed */
+	key_num = ffs(reg ^ mpr121->statusbits) - 1;
+	pressed = reg & (1 << (key_num));
+	mpr121->statusbits = reg;
+	mpr121->key_val = mpr121->keycodes[key_num];
+
+	input_event(input, EV_MSC, MSC_SCAN, key_num);
+	input_report_key(input, mpr121->key_val, pressed);
+	input_sync(input);
+
+	dev_dbg(&client->dev, "key %d %d %s\n", key_num, mpr121->key_val,
+		pressed ? "pressed" : "released");
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata,
+				      struct mpr121_touchkey *mpr121,
+				      struct i2c_client *client)
+{
+	const struct mpr121_init_register *reg;
+	unsigned char usl, lsl, tl;
+	int i, t, vdd, ret;
+
+	/* setup touch/release threshold for ele0-ele11 */
+	for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
+		t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
+		ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
+		if (ret < 0)
+			goto err_i2c_write;
+		ret = i2c_smbus_write_byte_data(client, t + 1,
+						RELEASE_THRESHOLD);
+		if (ret < 0)
+			goto err_i2c_write;
+	}
+	/* setup init register */
+	for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
+		reg = &init_reg_table[i];
+		ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
+		if (ret < 0)
+			goto err_i2c_write;
+	}
+
+
+	/* Capacitance on sensing input varies and needs to be
+	 * compensated. The internal MPR121-auto-configuration can do
+	 * this if it's registers are set properly (based on
+	 * pdata->vdd_uv). */
+	vdd = pdata->vdd_uv / 1000;
+	usl = ((vdd - 700) * 256) / vdd;
+	lsl = (usl * 65) / 100;
+	tl = (usl * 90) / 100;
+	ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
+	ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
+	ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
+	ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
+					 mpr121->keycount);
+	if (ret != 0)
+		goto err_i2c_write;
+
+	dev_dbg(&client->dev, "mpr121: setup with %x keys.\n",
+		mpr121->keycount);
+
+	return 0;
+
+err_i2c_write:
+	dev_err(&client->dev, "i2c write error: %d\n", ret);
+	return ret;
+}
+
+static int __devinit mpr_touchkey_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	const struct mpr121_platform_data *pdata = client->dev.platform_data;
+	struct mpr121_touchkey *mpr121;
+	struct input_dev *input_dev;
+	int error;
+	int i;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "The irq number should not be zero\n");
+		return -EINVAL;
+	}
+
+	mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!mpr121 || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	mpr121->client = client;
+	mpr121->input_dev = input_dev;
+	mpr121->keycount = pdata->matrix->keymap_size;
+
+	if (mpr121->keycount > MPR121_MAX_KEY_COUNT) {
+		dev_err(&client->dev, "too many keys defined\n");
+		error = -EINVAL;
+		goto err_free_mem;
+	}
+
+	error = mpr121_phys_init(pdata, mpr121, client);
+	if (error) {
+		dev_err(&client->dev, "Failed to init register\n");
+		goto err_free_mem;
+	}
+
+	input_dev->name = "Freescale MPR121 Touchkey";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
+	input_dev->keycodemax = mpr121->keycount;
+
+	for (i = 0; i < input_dev->keycodemax; i++) {
+		input_set_capability(input_dev, EV_KEY,
+				     KEY_VAL(pdata->matrix->keymap[i]));
+		mpr121->keycodes[i] = KEY_VAL(pdata->matrix->keymap[i]);
+	}
+
+	error = request_threaded_irq(client->irq, NULL,
+				     mpr_touchkey_interrupt,
+				     IRQF_TRIGGER_FALLING,
+				     client->dev.driver->name, mpr121);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+	i2c_set_clientdata(client, mpr121);
+	device_init_wakeup(&client->dev, pdata->wakeup);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, mpr121);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(mpr121);
+	return error;
+}
+
+static int __devexit mpr_touchkey_remove(struct i2c_client *client)
+{
+	struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
+
+	free_irq(client->irq, mpr121);
+	input_unregister_device(mpr121->input_dev);
+	kfree(mpr121);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mpr_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00);
+
+	return 0;
+}
+
+static int mpr_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
+				  mpr121->keycount);
+
+	return 0;
+}
+#endif
+
+static const struct i2c_device_id mpr121_id[] = {
+	{"mpr121_touchkey", 0},
+	{}
+};
+
+static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
+
+static struct i2c_driver mpr_touchkey_driver = {
+	.driver = {
+		.name	= "mpr121",
+		.owner	= THIS_MODULE,
+		.pm	= &mpr121_touchkey_pm_ops,
+	},
+	.id_table	= mpr121_id,
+	.probe		= mpr_touchkey_probe,
+	.remove		= __devexit_p(mpr_touchkey_remove),
+};
+
+static int __init mpr_touchkey_init(void)
+{
+	return i2c_add_driver(&mpr_touchkey_driver);
+}
+
+static void __exit mpr_touchkey_exit(void)
+{
+	i2c_del_driver(&mpr_touchkey_driver);
+}
+
+module_init(mpr_touchkey_init);
+module_exit(mpr_touchkey_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip");
diff --git a/include/linux/i2c/mpr.h b/include/linux/i2c/mpr.h
new file mode 100644
index 0000000..f5e8e71
--- /dev/null
+++ b/include/linux/i2c/mpr.h
@@ -0,0 +1,19 @@
+/* Header file for Freescale MPR121 Capacitive Touch Sensor */
+
+#ifndef MPR_H
+#define MPR_H
+
+struct matrix_keymap_data;
+
+/**
+ * @matrix: pointer to &matrix_keymap_data.
+ * @wakeup: configure the button as a wake-up source
+ * @vdd_uv: VDD voltage in uV
+ */
+struct mpr121_platform_data {
+	const struct matrix_keymap_data *matrix;
+	bool wakeup;
+	int vdd_uv;
+};
+
+#endif
-- 
1.7.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux