Hi all, I'm hoping that someone here can help. I am trying to get userland access to the I2C bus(es) on an embedded system, however recent kernels (ie. 2.6.38) are not 'loading' any buses when I 'modprobe i2c-dev'. Going back to ?2.6.32? I am able to see 1 bus, and 'i2cdetect 0' shows a single device sitting at address 0x69 (which I believe to EEPROM on the wifi card... not confirmed). The board is built around the Poulsbo and therefore using the 'i2c-isch' driver. Reviewing the schematic I see that there are several buses, each going to individual components: IT8516 U5/110+111 -> LTC1760 U6/18+22 [battery charger ? 0x1A/0x12] IT8516 U5/115+116 -> W83L771 U60/8+7 [thermal sensor ? 0x18??] IT8516 U5/117+118 -> LSM303DLH U64/19+20 [accel/compass ? 0x19] POULSBO U2/G37+H38 -> PCI Express Socket I am a little dismayed by the comment in 'i2c-isch.c' which suggest it can handle only one i2c bus at any time. -- /* Supports: Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L) Note: we assume there can only be one device, with one SMBus interface. */ -- This seems to correlate to these comments: http://www.linuxforums.org/forum/programming-scripting/175147-smbus-intel-sch-us15w.html Can anyone confirm whether this is actually the case, and whether it is possible to configure it to use a different controller address. One would expect this to be a module option I guess, however it doesn't seem to take any. Many thanks in advance, Simon. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
