Driver for Synaptics touchscreens using RMI4 protocol.
Signed-off-by: William Manson <wmanson@xxxxxxxxxxxxx>
Signed-off-by: Allie Xiong <axiong@xxxxxxxxxxxxx>
Signed-off-by: Christopher Heiny <cheiny@xxxxxxxxxxxxx>
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@xxxxxxxxxxxxxx>
Cc: Joeri de Gram <j.de.gram@xxxxxxxxx>
Acked-by: Jean Delvare <khali@xxxxxxxxxxxx>
---
diff --git a/drivers/input/touchscreen/rmi_bus.c b/drivers/input/touchscreen/rmi_bus.c
new file mode 100644
index 0000000..878784b
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_bus.c
@@ -0,0 +1,391 @@
+/**
+ * Synaptics Register Mapped Interface (RMI4) - RMI Bus Module.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ * Impliments "rmi" bus per Documentation/driver-model/bus.txt
+ *
+ * This protocol is layered as follows.
+ *
+ *
+ *
+ * +-------+ +-------+ +-------+ +--------+
+ * | Fn32 | | Fn11| | Fn19 | | Fn11 | Devices/Functions
+ * *---|---+ +--|----+ +----|--+ +----|---* (2D, cap. btns, etc.)
+ * | | | |
+ * +----------------+ +----------------+
+ * | Sensor0 | | Sensor1 | Sensors Dev/Drivers
+ * +----------------+ +----------------+ (a sensor has one or
+ * | | more functions)
+ * | |
+ * +----------------------------------------+
+ * | |
+ * | RMI4 Bus | RMI Bus Layer
+ * | (this file) |
+ * *--|-----|------|--------------|---------*
+ * | | | |
+ * | | | |
+ * +-----+-----+-------+--------------------+
+ * | I2C | SPI | SMBus | etc. | Physical Layer
+ * +-----+-----+-------+--------------------+
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+static const char busname[] = "rmi";
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+
+#include "rmi_drvr.h"
+#include "rmi.h"
+#include "rmi_bus.h"
+#include "rmi_platformdata.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+
+/* list of physical drivers - i2c, spi, etc. */
+static LIST_HEAD(phys_drivers);
+static DEFINE_MUTEX(phys_drivers_mutex);
+
+/* list of sensors found on a physical bus (i2c, smi, etc.)*/
+static LIST_HEAD(sensor_drivers);
+static DEFINE_MUTEX(sensor_drivers_mutex);
+static LIST_HEAD(sensor_devices);
+static DEFINE_MUTEX(sensor_devices_mutex);
+
+#define PDT_START_SCAN_LOCATION 0x00E9
+#define PDT_END_SCAN_LOCATION 0x0005
+#define PDT_ENTRY_SIZE 0x0006
+
+/* definitions for rmi bus */
+struct device rmi_bus_device;
+
+struct bus_type rmi_bus_type;
+EXPORT_SYMBOL(rmi_bus_type);
+
+
+/*
+ * This method is called, perhaps multiple times, whenever a new device or driver
+ * is added for this bus. It should return a nonzero value if the given device can be
+ * handled by the given driver. This function must be handled at the bus level,
+ * because that is where the proper logic exists; the core kernel cannot know how
+ * to match devices and drivers for every possible bus type
+ * The match function does a comparison between the hardware ID provided by
+ * the device itself and the IDs supported by the driver.
+ *
+ */
+static int rmi_bus_match(struct device *dev, struct device_driver *driver)
+{
+ printk(KERN_DEBUG "%s: Matching %s for rmi bus.\n", __func__, dev->bus->name);
+ return !strncmp(dev->bus->name, driver->name, strlen(driver->name));
+}
+
+/** Stub for now.
+ */
+static int rmi_bus_suspend(struct device *dev, pm_message_t state)
+{
+ printk(KERN_INFO "%s: RMI bus suspending.", __func__);
+ return 0;
+}
+
+/** Stub for now.
+ */
+static int rmi_bus_resume(struct device *dev)
+{
+ printk(KERN_INFO "%s: RMI bus resuming.", __func__);
+ return 0;
+}
+
+/*
+ * This method is called, whenever a new device is added for this bus.
+ * It will scan the devices PDT to get the function $01 query, control,
+ * command and data regsiters so that it can create a function $01 (sensor)
+ * device for the new physical device. It also caches the PDT for later use by
+ * other functions that are created for the device. For example, if a function
+ * $11 is found it will need the query, control, command and data register
+ * addresses for that function. The new function could re-scan the PDT but
+ * since it is being done here we can cache it and keep it around.
+ *
+ * TODO: If the device is reset or some action takes place that would invalidate
+ * the PDT - such as a reflash of the firmware - then the device should be re-added
+ * to the bus and the PDT re-scanned and cached.
+ *
+ */
+int rmi_register_sensor(struct rmi_phys_driver *rpd, struct rmi_functiondata_list *perfunctiondata)
+{
+ int i;
+ struct rmi_sensor_device *rmi_sensor_dev;
+ struct rmi_function_info *rfi;
+ struct rmi_function_descriptor rmi_fd;
+ int retval;
+ static int index;
+
+ /* Make sure we have a read, write, read_multiple, write_multiple
+ function pointers from whatever physical layer the sensor is on.
+ */
+ if (!rpd->name) {
+ printk(KERN_ERR "%s: Physical driver must specify a name\n",
+ __func__);
+ return -EINVAL;
+ }
+ if (!rpd->write) {
+ printk(KERN_ERR
+ "%s: Physical driver %s must specify a writer.\n",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+ if (!rpd->read) {
+ printk(KERN_ERR
+ "%s: Physical driver %s must specify a reader.\n",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+ if (!rpd->write_multiple) {
+ printk(KERN_ERR "%s: Physical driver %s must specify a "
+ "multiple writer.\n",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+ if (!rpd->read_multiple) {
+ printk(KERN_ERR "%s: Physical driver %s must specify a "
+ "multiple reader.\n",
+ __func__, rpd->name);
+ return -EINVAL;
+ }
+
+ /* Get some information from the device */
+ printk(KERN_INFO "%s: Identifying sensors by presence of F01...\n", __func__);
+
+ rmi_sensor_dev = NULL;
+
+ /* Scan the page descriptor table until we find F01. If we find that,
+ * we assume that we can reliably talk to this sensor.
+ */
+ for (i = PDT_START_SCAN_LOCATION; /* Register the rmi sensor driver */
+ i >= PDT_END_SCAN_LOCATION;
+ i -= PDT_ENTRY_SIZE) {
+ retval = rpd->read_multiple(rpd, i, (char *)&rmi_fd,
+ sizeof(rmi_fd));
+ if (!retval) {
+ rfi = NULL;
+
+ if (rmi_fd.functionNum != 0x00 && rmi_fd.functionNum != 0xff) {
+ if ((rmi_fd.functionNum & 0xff) == 0x01) {
+ printk(KERN_INFO "%s: F01 Found - RMI Device Control\n", __func__);
+
+ /* This appears to be a valid device, so create a sensor
+ * device and sensor driver for it. */
+ rmi_sensor_dev = kzalloc(sizeof(*rmi_sensor_dev), GFP_KERNEL);
+ if (!rmi_sensor_dev) {
+ printk(KERN_ERR "%s: Error allocating memory for rmi_sensor_device\n", __func__);
+ return -ENOMEM;
+ }
+ rmi_sensor_dev->dev.bus = &rmi_bus_type;
+
+ retval = rmi_sensor_register_device(rmi_sensor_dev, index++);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: Error %d registering sensor device\n", __func__, retval);
+ goto exit_fail;
+ }
+
+ rmi_sensor_dev->driver = kzalloc(sizeof(struct rmi_sensor_driver), GFP_KERNEL);
+ if (!rmi_sensor_dev->driver) {
+ printk(KERN_ERR "%s: Error allocating memory for rmi_sensor_driver\n", __func__);
+ return -ENOMEM;
+ }
+ rmi_sensor_dev->driver->sensor_device = rmi_sensor_dev;
+ rmi_sensor_dev->driver->polling_required = rpd->polling_required;
+ rmi_sensor_dev->driver->rpd = rpd;
+ rmi_sensor_dev->driver->perfunctiondata = perfunctiondata;
+ INIT_LIST_HEAD(&rmi_sensor_dev->driver->functions);
+
+ retval = rmi_sensor_register_driver(rmi_sensor_dev->driver);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: Error %d registering sensor driver\n", __func__, retval);
+ goto exit_fail;
+ }
+
+ /* link the attention fn in the rpd to the sensor attn fn */
+ printk(KERN_DEBUG "%s: linking sensor driver attention fn to rmi_phys_driver attention fn.\n", __func__);
+ rpd->sensor = rmi_sensor_dev->driver;
+ rpd->attention = rmi_sensor_dev->driver->attention;
+
+ /* Add it into the list of sensors on the rmi bus */
+ mutex_lock(&sensor_devices_mutex);
+ list_add_tail(&rmi_sensor_dev->sensors, &sensor_devices);
+ mutex_unlock(&sensor_devices_mutex);
+
+ /* All done with this sensor, fall out of PDT scan loop. */
+ break;
+ } else {
+ /* Just print out the function found for now */
+ printk(KERN_INFO "%s: Found Function %02x - Ignored.\n", __func__, rmi_fd.functionNum & 0xff);
+ }
+ } else {
+ /* A zero or 0xff in the function number
+ signals the end of the PDT */
+ pr_debug("%s: Found End of PDT\n",
+ __func__);
+ break;
+ }
+ } else {
+ /* failed to read next PDT entry - end PDT
+ scan - this may result in an incomplete set
+ of recognized functions - should probably
+ return an error but the driver may still be
+ viable for diagnostics and debugging so let's
+ let it continue. */
+ printk(KERN_ERR "%s: Read Error %d when reading next PDT entry - "
+ "ending PDT scan.\n",
+ __func__, retval);
+ break;
+ }
+ }
+
+ /* If we actually found a sensor, keep it around. */
+ if (rmi_sensor_dev) {
+ /* Add physical driver struct to list */
+ mutex_lock(&phys_drivers_mutex);
+ list_add_tail(&rpd->drivers, &phys_drivers);
+ mutex_unlock(&phys_drivers_mutex);
+ }
+
+ printk(KERN_DEBUG "%s: Registered sensor drivers.\n", __func__);
+
+ return 0;
+
+exit_fail:
+ return retval;
+}
+EXPORT_SYMBOL(rmi_register_sensor);
+
+int rmi_unregister_sensors(struct rmi_phys_driver *rpd)
+{
+ if (rpd->sensor) {
+ printk(KERN_WARNING "%s: WARNING: unregister of %s while %s still attached\n",
+ __func__, rpd->name, rpd->sensor->drv.name);
+ }
+
+ pr_debug("%s: Unregistering sensor drivers %s\n", __func__, rpd->name);
+
+ mutex_lock(&sensor_drivers_mutex);
+ list_del(&rpd->sensor->sensor_drivers);
+ mutex_unlock(&sensor_drivers_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(rmi_unregister_sensors);
+
+
+static void rmi_bus_dev_release(struct device *dev)
+{
+ printk(KERN_DEBUG "rmi bus device release\n");
+}
+
+
+int rmi_register_bus_device(struct device *rmibusdev)
+{
+ printk(KERN_DEBUG "%s: Registering RMI4 bus device.\n", __func__);
+
+ /* Here, we simply fill in some of the embedded device structure fields
+ (which individual drivers should not need to know about), and register
+ the device with the driver core. */
+
+ rmibusdev->bus = &rmi_bus_type;
+ rmibusdev->parent = &rmi_bus_device;
+ rmibusdev->release = rmi_bus_dev_release;
+ dev_set_name(rmibusdev, "rmi");
+
+ /* If we wanted to add bus-specific attributes to the device, we could do so here.*/
+
+ return device_register(rmibusdev);
+}
+EXPORT_SYMBOL(rmi_register_bus_device);
+
+void rmi_unregister_bus_device(struct device *rmibusdev)
+{
+ printk(KERN_DEBUG "%s: Unregistering bus device.\n", __func__);
+
+ device_unregister(rmibusdev);
+}
+EXPORT_SYMBOL(rmi_unregister_bus_device);
+
+static int __init rmi_bus_init(void)
+{
+ int status;
+
+ status = 0;
+
+ printk(KERN_INFO "%s: RMI Bus Driver Init\n", __func__);
+
+ /* Register the rmi bus */
+ rmi_bus_type.name = busname;
+ rmi_bus_type.match = rmi_bus_match;
+ rmi_bus_type.suspend = rmi_bus_suspend;
+ rmi_bus_type.resume = rmi_bus_resume;
+ status = bus_register(&rmi_bus_type);
+ if (status < 0) {
+ printk(KERN_ERR "%s: Error %d registering the rmi bus\n", __func__, status);
+ goto err_exit;
+ }
+ printk(KERN_DEBUG "%s: registered bus.", __func__);
+
+#if 0
+ /** This doesn't seem to be required any more. It worked OK in Froyo,
+ * but breaks in Gingerbread */
+ /* Register the rmi bus device - "rmi". There is only one rmi bus device. */
+ status = rmi_register_bus_device(&rmi_bus_device);
+ if (status < 0) {
+ printk(KERN_ERR "%s: Error %d registering rmi bus device\n", __func__, status);
+ bus_unregister(&rmi_bus_type);
+ goto err_exit;
+ }
+ printk(KERN_DEBUG "%s: Registered bus device.", __func__);
+#endif
+
+ return 0;
+err_exit:
+ return status;
+}
+
+static void __exit rmi_bus_exit(void)
+{
+ printk(KERN_DEBUG "%s: RMI Bus Driver Exit\n", __func__);
+
+ /* Unregister the rmi bus device - "rmi". There is only one rmi bus device. */
+ rmi_unregister_bus_device(&rmi_bus_device);
+
+ /* Unregister the rmi bus */
+ bus_unregister(&rmi_bus_type);
+}
+
+
+module_init(rmi_bus_init);
+module_exit(rmi_bus_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/rmi_bus.h b/drivers/input/touchscreen/rmi_bus.h
new file mode 100644
index 0000000..70c6b68
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_bus.h
@@ -0,0 +1,33 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) - RMI Bus Module Header.
+ * Copyright (C) 2007 - 2010, Synaptics Incorporated
+ *
+ */
+/*
+ *
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_BUS_H
+#define _RMI_BUS_H
+
+
+extern struct bus_type rmi_bus_type;
+
+#endif
+
diff --git a/drivers/input/touchscreen/rmi_i2c.c b/drivers/input/touchscreen/rmi_i2c.c
new file mode 100644
index 0000000..4fc0665
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_i2c.c
@@ -0,0 +1,625 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
+ * Copyright (c) 2007-2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include "rmi_i2c.h"
+#include "rmi_drvr.h"
+
+
+#define DRIVER_NAME "rmi4_ts"
+
+#define DEVICE_NAME "rmi4_ts"
+
+/* Used to lock access to the page address.*/
+/* TODO: for multiple device support will need a per-device mutex */
+static DEFINE_MUTEX(page_mutex);
+
+
+static const struct i2c_device_id rmi_i2c_id_table[] = {
+ { DEVICE_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, rmi_i2c_id_table);
+
+
+/* Used to count the number of I2C modules we get.
+ */
+static int device_count;
+
+
+/*
+ * This is the data kept on a per instance (client) basis. This data is
+ * always accessible by using the container_of() macro of the various elements
+ * inside.
+ */
+struct instance_data {
+ int instance_no;
+ int irq;
+ struct rmi_phys_driver rmiphysdrvr;
+ struct i2c_client *i2cclient; /* pointer to i2c_client for later use in
+ read, write, read_multiple, etc. */
+ int page;
+};
+
+/*
+ * RMI devices have 16-bit addressing, but some of the physical
+ * implementations (like SMBus) only have 8-bit addressing. So RMI implements
+ * a page address at 0xff of every page so we can reliable page addresses
+ * every 256 registers. This function sets the page.
+ *
+ * The page_mutex lock must be held when this function is entered.
+ *
+ * param[in] id - The pointer to the instance_data struct
+ * param[in] page - The new page address.
+ * returns zero on success, non-zero on failure.
+ */
+int
+rmi_set_page(struct instance_data *instancedata, unsigned int page)
+{
+ char txbuf[2];
+ int retval;
+ txbuf[0] = 0xff;
+ txbuf[1] = page;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 2);
+ if (retval != 2) {
+ dev_err(&instancedata->i2cclient->dev,
+ "%s: Set page fail: %d\n", __func__, retval);
+ } else {
+ retval = 0;
+ instancedata->page = page;
+ }
+ return retval;
+}
+
+/*
+ * Read a single register through i2c.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the data read.
+ * param[out] valp - Pointer to the buffer where the data will be stored.
+ * returns xero upon success (with the byte read in valp), non-zero upon error.
+ */
+static int
+rmi_i2c_read(struct rmi_phys_driver *physdrvr, unsigned short address, char *valp)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ char txbuf[2];
+ int retval = 0;
+ int retry_count = 0;
+
+ /* Can't have anyone else changing the page behind our backs */
+#if 0
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+#endif
+
+retry:
+ txbuf[0] = address & 0xff;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 1);
+
+ if (retval != 1) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit;
+ }
+ retval = i2c_master_recv(instancedata->i2cclient, txbuf, 1);
+
+ if (retval != 1) {
+ if (++retry_count == 5) {
+ dev_err(&instancedata->i2cclient->dev,
+ "%s: Read of 0x%04x fail: %d\n",
+ __func__, address, retval);
+ } else {
+ mdelay(10);
+#if 0
+ rmi_set_page(instancedata, ((address >> 8) & 0xff));
+#endif
+ goto retry;
+ }
+ } else {
+ retval = 0;
+ *valp = txbuf[0];
+ }
+exit:
+
+#if 0
+ mutex_unlock(&page_mutex);
+#endif
+ return retval;
+}
+
+/*
+ * Same as rmi_i2c_read, except that multiple bytes are allowed to be read.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the data read.
+ * param[out] valp - Pointer to the buffer where the data will be stored. This
+ * buffer must be at least size bytes long.
+ * param[in] size - The number of bytes to be read.
+ * returns zero upon success (with the byte read in valp), non-zero upon error.
+ *
+ */
+static int
+rmi_i2c_read_multiple(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *valp, int size)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ char txbuf[2];
+ int retval = 0;
+ int retry_count = 0;
+
+#if 0
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+#endif
+
+retry:
+ txbuf[0] = address & 0xff;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 1);
+
+ if (retval != 1) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit;
+ }
+ retval = i2c_master_recv(instancedata->i2cclient, valp, size);
+
+ if (retval != size) {
+ if (++retry_count == 5) {
+ dev_err(&instancedata->i2cclient->dev,
+ "%s: Read of 0x%04x size %d fail: %d\n",
+ __func__, address, size, retval);
+ } else {
+ mdelay(10);
+#if 0
+ rmi_set_page(instancedata, ((address >> 8) & 0xff));
+#endif
+ goto retry;
+ }
+ } else {
+ retval = 0;
+ }
+exit:
+
+#if 0
+ mutex_unlock(&page_mutex);
+#endif
+ return retval;
+}
+
+
+/*
+ * Write a single register through i2c.
+ * You can write multiple registers at once, but I made the functions for that
+ * seperate for performance reasons. Writing multiple requires allocation and
+ * freeing.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the write.
+ * param[in] data - The data to be written.
+ * returns one upon success, something else upon error.
+ */
+static int
+rmi_i2c_write(struct rmi_phys_driver *physdrvr, unsigned short address, char data)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ unsigned char txbuf[2];
+ int retval = 0;
+
+#if 0
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+#endif
+
+ txbuf[0] = address & 0xff;
+ txbuf[1] = data;
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, 2);
+
+ /* TODO: Add in retry on writes only in certian error return values */
+ if (retval != 2) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit; /* Leave this in case we add code below */
+ }
+exit:
+
+#if 0
+ mutex_unlock(&page_mutex);
+#endif
+ return retval;
+}
+
+/*
+ * Write multiple registers.
+ *
+ * For fast writes of 16 bytes of less we will re-use a buffer on the stack.
+ * For larger writes (like for RMI reflashing) we will need to allocate a
+ * temp buffer.
+ *
+ * param[in] pd - The pointer to the rmi_phys_driver struct
+ * param[in] address - The address at which to start the write.
+ * param[in] valp - A pointer to a buffer containing the data to be written.
+ * param[in] size - The number of bytes to write.
+ * returns one upon success, something else upon error.
+ */
+static int
+rmi_i2c_write_multiple(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *valp, int size)
+{
+ struct instance_data *instancedata =
+ container_of(physdrvr, struct instance_data, rmiphysdrvr);
+
+ unsigned char *txbuf;
+ unsigned char txbuf_most[17]; /* Use this buffer for fast writes of 16
+ bytes or less. The first byte will
+ contain the address at which to start
+ the write. */
+ int retval = 0;
+ int i;
+
+ if (size < sizeof(txbuf_most)) {
+ /* Avoid an allocation if we can help it. */
+ txbuf = txbuf_most;
+ } else {
+ /* over 16 bytes write we'll need to allocate a temp buffer */
+ txbuf = kzalloc(size + 1, GFP_KERNEL);
+ if (!txbuf)
+ return -ENOMEM;
+ }
+
+ /* Yes, it stinks here that we have to copy the buffer */
+ /* We copy from valp to txbuf leaving
+ the first location open for the address */
+ for (i = 0; i < size; i++)
+ txbuf[i + 1] = valp[i];
+
+#if 0
+ /* Can't have anyone else changing the page behind our backs */
+ mutex_lock(&page_mutex);
+
+ if (((address >> 8) & 0xff) != instancedata->page) {
+ /* Switch pages */
+ retval = rmi_set_page(instancedata, ((address >> 8) & 0xff));
+ if (retval)
+ goto exit;
+ }
+#endif
+
+ txbuf[0] = address & 0xff; /* put the address in the first byte */
+ retval = i2c_master_send(instancedata->i2cclient, txbuf, size + 1);
+
+ /* TODO: Add in retyr on writes only in certian error return values */
+ if (retval != 1) {
+ dev_err(&instancedata->i2cclient->dev, "%s: Write fail: %d\n",
+ __func__, retval);
+ goto exit;
+ }
+exit:
+
+#if 0
+ mutex_unlock(&page_mutex);
+#endif
+ if (txbuf != txbuf_most)
+ kfree(txbuf);
+ return retval;
+}
+
+/*
+ * This is the Interrupt Service Routine. It just notifies the application
+ * layer that attention is required.
+ */
+static irqreturn_t
+i2c_attn_isr(int irq, void *info)
+{
+ struct instance_data *instancedata = info;
+
+ disable_irq_nosync(instancedata->irq);
+
+ if (instancedata->rmiphysdrvr.attention) {
+ instancedata->rmiphysdrvr.attention(&instancedata->rmiphysdrvr,
+ instancedata->instance_no);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* The Driver probe function - will allocate and initialize the instance
+ * data and request the irq and set the instance data as the clients
+ * platform data then register the physical driver which will do a scan of
+ * the RMI4 Physical Device Table and enumerate any RMI4 functions that
+ * have data sources associated with them.
+ */
+static int
+rmi_i2c_probe(struct i2c_client *client, const struct i2c_device_id *dev_id)
+{
+
+ struct instance_data *instancedata;
+ int retval = 0;
+ int irqtype = 0;
+
+ struct rmi_i2c_platformdata *platformdata;
+
+ if (client == NULL) {
+ printk(KERN_ERR "%s: Invalid NULL client received.", __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "%s: Probing i2c RMI device, addr: 0x%02x", __func__, client->addr);
+
+ /* Egregiously horrible delay here that seems to prevent I2C disasters on
+ * certain broken dev systems. In most cases, you can safely remove this.
+ * TODO: convert this to a parameter than can be spec'ed at boot time,
+ * so not everyone needs to suffer.
+ */
+ mdelay(1000);
+
+ /* Allocate and initialize the instance data for this client */
+ instancedata = kzalloc(sizeof(*instancedata), GFP_KERNEL);
+ if (!instancedata) {
+ dev_err(&client->dev,
+ "%s: Out of memory trying to allocate instance_data.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ instancedata->rmiphysdrvr.name = DRIVER_NAME;
+ instancedata->rmiphysdrvr.write = rmi_i2c_write;
+ instancedata->rmiphysdrvr.read = rmi_i2c_read;
+ instancedata->rmiphysdrvr.write_multiple = rmi_i2c_write_multiple;
+ instancedata->rmiphysdrvr.read_multiple = rmi_i2c_read_multiple;
+ instancedata->rmiphysdrvr.module = THIS_MODULE;
+
+ /* Set default to polling in case no matching platform data is located
+ for this device. We'll still work but in polling mode since we didn't
+ find any irq info */
+ instancedata->rmiphysdrvr.polling_required = true;
+
+ instancedata->page = 0xffff; /* Force a set page the first time */
+
+ /* cast to our struct rmi_i2c_platformdata so we know
+ the fields (see rmi_ic2.h) */
+ platformdata = client->dev.platform_data;
+ if (platformdata == NULL) {
+ printk(KERN_ERR "%s: CONFIGURATION ERROR - platform data is NULL.", __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_DEBUG "%s: sensor addr: 0x%02x irq: 0x%x type: %d",
+ __func__, platformdata->i2c_address, platformdata->irq, platformdata->irq_type);
+ if (client->addr != platformdata->i2c_address) {
+ printk(KERN_ERR "%s: CONFIGURATION ERROR - client I2C address 0x%02x doesn't match platform data address 0x%02x.", __func__, client->addr, platformdata->i2c_address);
+ return -EINVAL;
+ }
+
+ instancedata->instance_no = device_count++;
+
+ /* set the device name using the instance_no appended
+ to DEVICE_NAME to make a unique name */
+ dev_set_name(&client->dev,
+ "rmi4-i2c%d", instancedata->instance_no);
+
+ /* Determine if we need to poll (inefficient) or use interrupts.
+ */
+ if (platformdata->irq) {
+ instancedata->irq = platformdata->irq;
+ switch (platformdata->irq_type) {
+ case IORESOURCE_IRQ_HIGHEDGE:
+ irqtype = IRQF_TRIGGER_RISING;
+ break;
+ case IORESOURCE_IRQ_LOWEDGE:
+ irqtype = IRQF_TRIGGER_FALLING;
+ break;
+ case IORESOURCE_IRQ_HIGHLEVEL:
+ irqtype = IRQF_TRIGGER_HIGH;
+ break;
+ case IORESOURCE_IRQ_LOWLEVEL:
+ irqtype = IRQF_TRIGGER_LOW;
+ break;
+ default:
+ dev_warn(&client->dev,
+ "%s: Invalid IRQ flags in platform data.\n",
+ __func__);
+ kfree(instancedata);
+ return -ENXIO;
+ }
+
+ instancedata->rmiphysdrvr.polling_required = false;
+ instancedata->rmiphysdrvr.irq = instancedata->irq;
+
+ } else {
+ instancedata->rmiphysdrvr.polling_required = true;
+ dev_info(&client->dev,
+ "%s: No IRQ info given. Polling required.\n",
+ __func__);
+ }
+
+ /* Store the instance data in the i2c_client - we need to do this prior
+ * to calling register_physical_driver since it may use the read, write
+ * functions. If nothing was found then the id fields will be set to 0
+ * for the irq and the default will be set to polling required so we
+ * will still work but in polling mode. */
+ i2c_set_clientdata(client, instancedata);
+
+ /* Copy i2c_client pointer into instance_data's i2c_client pointer for
+ later use in rmi4_read, rmi4_write, etc. */
+ instancedata->i2cclient = client;
+
+ /* Register sensor drivers - this will call the detect function that
+ * will then scan the device and determine the supported RMI4 sensors
+ * and functions.
+ */
+ retval = rmi_register_sensor(&instancedata->rmiphysdrvr, platformdata->perfunctiondata);
+ if (retval) {
+ dev_err(&client->dev, "%s: Failed to Register %s sensor drivers\n",
+ __func__, instancedata->rmiphysdrvr.name);
+ i2c_set_clientdata(client, NULL);
+ kfree(instancedata);
+ return retval;
+ }
+
+ if (instancedata->rmiphysdrvr.polling_required == false) {
+ retval = request_irq(instancedata->irq, i2c_attn_isr,
+ irqtype, "rmi_i2c", instancedata);
+ if (retval) {
+ dev_err(&client->dev, "%s: failed to obtain IRQ %d. Result: %d.",
+ __func__, instancedata->irq, retval);
+ dev_info(&client->dev, "%s: Reverting to polling.\n", __func__);
+ instancedata->rmiphysdrvr.polling_required = true;
+ /* TODO: Need to revert back to polling - create and start timer, turn off interrupts for each fn */
+ } else {
+ dev_dbg(&client->dev, "%s: got irq.\n", __func__);
+ }
+ }
+
+ dev_dbg(&client->dev, "%s: Successfully registered %s sensor driver.\n",
+ __func__, instancedata->rmiphysdrvr.name);
+
+ printk(KERN_INFO "%s: Successfully registered %s sensor driver.\n", __func__, instancedata->rmiphysdrvr.name);
+
+ return retval;
+}
+
+/* The Driver remove function. We tear down the instance data and unregister
+ * the phys driver in this call.
+ */
+static int
+rmi_i2c_remove(struct i2c_client *client)
+{
+ struct instance_data *instancedata =
+ i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s: Unregistering phys driver %s\n", __func__,
+ instancedata->rmiphysdrvr.name);
+
+ rmi_unregister_sensors(&instancedata->rmiphysdrvr);
+
+ dev_dbg(&client->dev, "%s: Unregistered phys driver %s\n",
+ __func__, instancedata->rmiphysdrvr.name);
+
+ /* only free irq if we have an irq - otherwise the instance_data
+ will be 0 for that field */
+ if (instancedata->irq)
+ free_irq(instancedata->irq, instancedata);
+
+ kfree(instancedata);
+ dev_dbg(&client->dev, "%s: Remove successful\n", __func__);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+rmi_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ /* Touch sleep mode */
+ return 0;
+}
+
+static int
+rmi_i2c_resume(struct i2c_client *client)
+{
+ /* Re-initialize upon resume */
+ return 0;
+}
+#else
+#define rmi_i2c_suspend NULL
+#define rmi_i2c_resume NULL
+#endif
+
+/*
+ * This structure tells the i2c subsystem about us.
+ *
+ * TODO: we should add .suspend and .resume fns.
+ *
+ */
+static struct i2c_driver rmi_i2c_driver = {
+ .probe = rmi_i2c_probe,
+ .remove = rmi_i2c_remove,
+ .suspend = rmi_i2c_suspend,
+ .resume = rmi_i2c_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .id_table = rmi_i2c_id_table,
+};
+
+/*
+ * Register ourselves with i2c Chip Driver.
+ *
+ */
+static int __init rmi_phys_i2c_init(void)
+{
+ return i2c_add_driver(&rmi_i2c_driver);
+}
+
+/*
+ * Un-register ourselves from the i2c Chip Driver.
+ *
+ */
+static void __exit rmi_phys_i2c_exit(void)
+{
+ i2c_del_driver(&rmi_i2c_driver);
+}
+
+
+module_init(rmi_phys_i2c_init);
+module_exit(rmi_phys_i2c_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Driver I2C Physical Layer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/rmi_i2c.h b/drivers/input/touchscreen/rmi_i2c.h
new file mode 100644
index 0000000..df1290f
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_i2c.h
@@ -0,0 +1,50 @@
+/**
+ *
+ * Synaptics RMI over I2C Physical Layer Driver Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_I2C_H
+#define _RMI_I2C_H
+
+#include "rmi_platformdata.h"
+
+/* Sensor-specific configuration data, to be included as the platform data
+ * for the relevant i2c_board_info entry.
+ *
+ * This describes a single RMI4 sensor on an I2C bus, including:
+ * its I2C address, IRQ (if any), the type of IRQ (if applicable), and an
+ * optional list of any non-default settings (on a per function basis)
+ * to be applied at start up.
+ */
+struct rmi_i2c_platformdata {
+ /* The seven-bit i2c address of the sensor. */
+ int i2c_address;
+ /* The number of the irq. Set to zero if polling is required. */
+ int irq;
+ /* The type of the irq (e.g., IRQF_TRIGGER_FALLING).
+ Only valid if irq != 0 */
+ int irq_type;
+ /* Use this to specify non-default settings on a per function basis. */
+ struct rmi_functiondata_list *perfunctiondata;
+};
+
+#endif
diff --git a/drivers/input/touchscreen/rmi_spi.c b/drivers/input/touchscreen/rmi_spi.c
new file mode 100644
index 0000000..e0444ec
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_spi.c
@@ -0,0 +1,474 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) SPI Physical Layer Driver.
+ * Copyright (C) 2008-2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+#include "rmi_spi.h"
+#include "rmi_drvr.h"
+
+#define DRIVER_NAME "rmi4_ts"
+#define DEVICE_NAME "rmi4_ts"
+
+#define RMI_TDPB 65 /* 65 microseconds inter-byte delay between bytes for RMI chip*/
+#define SPI_BUFSIZ 32
+
+static u8 *buf;
+
+/** This is a count of how many clients are accessing this driver.
+ */
+static int num_clients;
+static struct rmi_spi_platformdata *platformdata;
+
+
+/**
+ * This is the data kept on a per instance (client) basis. This data is
+ * always accessible by using the container_of() macro of the various elements
+ * inside.
+ */
+struct instance_data {
+ int instance_no;
+ int irq;
+ struct rmi_phys_driver rpd;
+ struct spi_device *spidev;
+};
+
+
+static int spi_xfer(struct spi_device *spi,
+ const u8 *txbuf, unsigned n_tx,
+ u8 *rxbuf, unsigned n_rx)
+{
+ static DECLARE_MUTEX(lock);
+
+ int status;
+ struct spi_message message;
+ struct spi_transfer x[2];
+ u8 *local_buf;
+
+
+ if ((n_tx + n_rx) > SPI_BUFSIZ)
+ return -EINVAL;
+
+ spi_message_init(&message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ x[0].delay_usecs = RMI_TDPB;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+#ifdef CONFIG_ARCH_OMAP
+ x[1].len = n_rx-1; /* since OMAP has one dummy byte. */
+#else
+ x[1].len = n_rx;
+#endif
+ x[1].delay_usecs = RMI_TDPB;
+ spi_message_add_tail(&x[1], &message);
+ }
+
+ /* ... unless someone else is using the pre-allocated buffer */
+ if (down_trylock(&lock)) {
+ local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
+ if (!local_buf)
+ return -ENOMEM;
+ } else
+ local_buf = buf;
+
+ memcpy(local_buf, txbuf, n_tx);
+
+
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
+
+ /* do the i/o */
+ status = spi_sync(spi, &message);
+ if (status == 0) {
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
+ status = message.status;
+ } else {
+ printk(KERN_ERR "spi_sync fials!\n");
+ }
+
+ if (x[0].tx_buf == buf)
+ up(&lock);
+ else
+ kfree(local_buf);
+
+ return status;
+}
+
+/**
+ * Read a single register through spi.
+ * \param[in] pd
+ * \param[in] address The address at which to start the data read.
+ * \param[out] valp Pointer to the buffer where the data will be stored.
+ * \return zero upon success (with the byte read in valp), non-zero upon error.
+ */
+static int
+rmi_spi_read(struct rmi_phys_driver *pd, unsigned short address, char *valp)
+{
+ struct instance_data *id = container_of(pd, struct instance_data, rpd);
+
+ char rxbuf[2];
+ int retval;
+ unsigned short addr = address;
+
+ addr = ((addr & 0xff00) >> 8);
+ address = ((address & 0x00ff) << 8);
+ addr |= address;
+ addr |= 0x80; /* High bit set indicates read. */
+
+ retval = spi_xfer(id->spidev, (u8 *)&addr, 2, rxbuf, 1);
+
+ *valp = rxbuf[0];
+
+ return retval;
+}
+
+/**
+ * Same as rmi_spi_read, except that multiple bytes are allowed to be read.
+ * \param[in] pd
+ * \param[in] address The address at which to start the data read.
+ * \param[out] valp Pointer to the buffer where the data will be stored. This
+ * buffer must be at least size bytes long.
+ * \param[in] size The number of bytes to be read.
+ * \return zero upon success (with the byte read in valp), non-zero upon error.
+ */
+static int
+rmi_spi_read_multiple(struct rmi_phys_driver *pd, unsigned short address,
+ char *valp, int size)
+{
+ struct instance_data *id = container_of(pd, struct instance_data, rpd);
+ int retval;
+
+ unsigned short addr = address;
+
+ addr = ((addr & 0xff00) >> 8);
+ address = ((address & 0x00ff) << 8);
+ addr |= address;
+ addr |= 0x80; /* High bit set indicates read. */
+
+ retval = spi_xfer(id->spidev, (u8 *)&addr, 2, valp, size);
+
+ return retval;
+}
+
+/**
+ * Write a single register through spi.
+ * You can write multiple registers at once, but I made the functions for that
+ * seperate for performance reasons. Writing multiple requires allocation and
+ * freeing.
+ * \param[in] pd
+ * \param[in] address The address at which to start the write.
+ * \param[in] data The data to be written.
+ * \return one upon success, something else upon error.
+ */
+static int
+rmi_spi_write(struct rmi_phys_driver *pd, unsigned short address, char data)
+{
+ struct instance_data *id = container_of(pd, struct instance_data, rpd);
+ unsigned char txbuf[4];
+ int retval;
+
+ txbuf[2] = data;
+ txbuf[1] = address;
+ txbuf[0] = address>>8;
+
+ retval = spi_xfer(id->spidev, txbuf, 3, NULL, 0);
+ return retval ? 0 : 1;
+}
+
+/**
+ * Write multiple registers.
+ * \param[in] pd
+ * \param[in] address The address at which to start the write.
+ * \param[in] valp A pointer to a buffer containing the data to be written.
+ * \param[in] size The number of bytes to write.
+ * \return one upon success, something else upon error.
+ */
+static int
+rmi_spi_write_multiple(struct rmi_phys_driver *pd, unsigned short address,
+ char *valp, int size)
+{
+ struct instance_data *id = container_of(pd, struct instance_data, rpd);
+ unsigned char txbuf[32];
+ int retval;
+ int i;
+
+ txbuf[1] = address;
+ txbuf[0] = address>>8;
+
+ for (i = 0; i < size; i++)
+ txbuf[i + 2] = valp[i];
+
+ retval = spi_xfer(id->spidev, txbuf, size+2, NULL, 0);
+
+ return retval ? 0 : 1;
+}
+
+/**
+ * This is the Interrupt Service Routine. It just notifies the application
+ * layer that attention is required.
+ */
+static irqreturn_t spi_attn_isr(int irq, void *info)
+{
+ struct instance_data *id = info;
+ disable_irq(id->irq);
+ if (id->rpd.attention)
+ id->rpd.attention(&id->rpd, id->instance_no);
+ return IRQ_HANDLED;
+}
+
+
+static int rmi_spi_probe(struct spi_device *spi)
+{
+ struct instance_data *id;
+ int retval;
+ int i;
+ bool found;
+ struct rmi_spi_data *rmispidata;
+ struct rmi_spi_platformdata *platformdata;
+
+ printk(KERN_INFO "Probing RMI4 SPI device\n");
+
+ found = false;
+
+ spi->bits_per_word = 8;
+
+ spi->mode = SPI_MODE_3;
+
+ buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "%s: Out of memory - can't allocate memory for spi buffer\n", __func__);
+ return -ENOMEM;
+ }
+
+ retval = spi_setup(spi);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: spi_setup failed.", __func__);
+ return retval;
+ }
+
+ id = kzalloc(sizeof(*id), GFP_KERNEL);
+ if (!id) {
+ printk(KERN_ERR "%s: Out of memory - can't allocate memory for instance data.", __func__);
+ return -ENOMEM;
+ }
+
+ id->spidev = spi;
+ id->rpd.name = DRIVER_NAME;
+ id->rpd.write = rmi_spi_write;
+ id->rpd.read = rmi_spi_read;
+ id->rpd.write_multiple = rmi_spi_write_multiple;
+ id->rpd.read_multiple = rmi_spi_read_multiple;
+ id->rpd.module = THIS_MODULE;
+ id->rpd.polling_required = true; /* default to polling if irq not used */
+
+ /* Loop through the client data and locate the one that was found. */
+
+ rmispidata = spi->dev.platform_data;
+
+ /* Loop through the platform data and locate the one that matches the clients address */
+ for (i = 0; i < rmispidata->num_clients; i++) {
+ platformdata = &(rmispidata->platformdata[i]);
+ if (platformdata->chip == RMI_SUPPORT) {
+ id->instance_no = i;
+ found = true;
+
+ /* set the device name using the instance_no appended to DEVICE_NAME to make a unique name */
+ dev_set_name(&spi->dev, "rmi4-spi%d", id->instance_no);
+ /*
+ * Determine if we need to poll (inefficient) or use interrupts.
+ */
+ if (platformdata->irq) {
+ int irqtype;
+
+ id->irq = platformdata->irq;
+ switch (platformdata->irq_type) {
+ case IORESOURCE_IRQ_HIGHEDGE:
+ irqtype = IRQF_TRIGGER_RISING;
+ break;
+ case IORESOURCE_IRQ_LOWEDGE:
+ irqtype = IRQF_TRIGGER_FALLING;
+ break;
+ case IORESOURCE_IRQ_HIGHLEVEL:
+ irqtype = IRQF_TRIGGER_HIGH;
+ break;
+ case IORESOURCE_IRQ_LOWLEVEL:
+ irqtype = IRQF_TRIGGER_LOW;
+ break;
+ default:
+ dev_warn(&spi->dev, "%s: Invalid IRQ flags in platform data.", __func__);
+ kfree(id);
+ return -ENXIO;
+ }
+
+ retval = request_irq(id->irq, spi_attn_isr, irqtype, "rmi_spi", id);
+ if (retval) {
+ dev_info(&spi->dev, "%s: Unable to get attn irq %d. Reverting to polling.", __func__, id->irq);
+ id->rpd.polling_required = true;
+ } else {
+ dev_dbg(&spi->dev, "%s: got irq", __func__);
+ id->rpd.polling_required = false;
+ id->rpd.irq = id->irq;
+ }
+ } else {
+ id->rpd.polling_required = true;
+ dev_info(&spi->dev, "%s: No IRQ info given. Polling required.", __func__);
+ }
+ }
+ }
+
+ /* if went through all the platform data list and didn't find a match
+ * then notify that we are defaulting to polling */
+ if (!found)
+ dev_info(&spi->dev, "%s: No platform data match found. Defaulting to use polling.", __func__);
+
+ /* Store instance data for later access. */
+ if (id)
+ spi_set_drvdata(spi, id);
+
+ /* Register the sensor driver - which will trigger a scan of the PDT. */
+ retval = rmi_register_sensor(&id->rpd, platformdata->perfunctiondata);
+ if (retval) {
+ printk(KERN_ERR "rmi_register_phys_driver failed with code %d.", retval);
+ if (id->irq)
+ free_irq(id->irq, id);
+ kfree(id);
+ return retval;
+ }
+
+ printk(KERN_INFO "%s: Successfully Registered %s.", __func__, id->rpd.name);
+
+ return 0;
+}
+
+static int rmi_spi_suspend(struct spi_device *spi, pm_message_t message)
+{
+ return 0;
+}
+
+static int rmi_spi_resume(struct spi_device *spi)
+{
+ return 0;
+}
+
+static int __devexit rmi_spi_remove(struct spi_device *spi)
+{
+ struct instance_data *id = spi_get_drvdata(spi);
+
+ rmi_spi_suspend(spi, PMSG_SUSPEND);
+
+ rmi_unregister_sensors(&id->rpd);
+
+ if (id) {
+ if (id->irq)
+ free_irq(id->irq, id);
+ kfree(id);
+ }
+
+ return 0;
+}
+
+static struct spi_driver rmi_spi_driver = {
+ .driver = {
+ .name = "rmi_spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = rmi_spi_probe,
+ .remove = __devexit_p(rmi_spi_remove),
+ .suspend = rmi_spi_suspend,
+ .resume = rmi_spi_resume,
+};
+
+/**
+ * The Platform Driver probe function. We just tell the spi subsystem about
+ * ourselves in this call.
+ */
+static int
+rmi_spi_plat_probe(struct platform_device *dev)
+{
+ struct rmi_spi_data *mid = dev->dev.platform_data;
+
+ if (!mid) {
+ printk(KERN_ERR "A platform device must contain rmi_spi_data\n");
+ return -ENXIO;
+ }
+
+ num_clients = mid->num_clients;
+ platformdata = mid->platformdata;
+
+ return spi_register_driver(&rmi_spi_driver);
+}
+
+/**
+ * Tell the spi subsystem that we're done.
+ * \param[in] dev
+ * \return Always returns 0.
+ */
+static int
+rmi_spi_plat_remove(struct platform_device *dev)
+{
+ spi_unregister_driver(&rmi_spi_driver);
+ return 0;
+}
+
+/**
+ * Structure used to tell the Platform Driver subsystem about us.
+ */
+static struct platform_driver rmi_spi_platform_driver = {
+ .driver = {
+ .name = "rmi_spi_plat",
+ },
+ .probe = rmi_spi_plat_probe,
+ .remove = rmi_spi_plat_remove,
+};
+
+static int __init rmi_spi_init(void)
+{
+ return platform_driver_register(&rmi_spi_platform_driver);
+}
+module_init(rmi_spi_init);
+
+static void __exit rmi_spi_exit(void)
+{
+ kfree(buf);
+ buf = NULL;
+ platform_driver_unregister(&rmi_spi_platform_driver);
+}
+module_exit(rmi_spi_exit);
+
+/** Standard driver module information - the author of the module.
+ */
+MODULE_AUTHOR("Synaptics, Inc.");
+/** Standard driver module information - a summary description of this module.
+ */
+MODULE_DESCRIPTION("RMI4 Driver SPI Physical Layer");
+/** Standard driver module information - the license under which this module
+ * is included in the kernel.
+ */
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/touchscreen/rmi_spi.h b/drivers/input/touchscreen/rmi_spi.h
new file mode 100644
index 0000000..0744e8d
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_spi.h
@@ -0,0 +1,55 @@
+/**
+ *
+ * Register Mapped Interface SPI Physical Layer Driver Header File.
+ * Copyright (C) 2008-2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#if !defined(RMI_SPI_H)
+#define RMI_SPI_H
+
+#include "rmi_platformdata.h"
+
+#define RMI_CHIP_VER_3 0
+#define RMI_CHIP_VER_4 1
+
+#define RMI_SUPPORT (RMI_CHIP_VER_3|RMI_CHIP_VER_4)
+
+/** Platform-specific configuration data.
+ * This structure is used by the platform-specific driver to designate
+ * specific information about the hardware. A platform client may supply
+ * an array of these to the rmi_phys_spi driver.
+ */
+struct rmi_spi_platformdata {
+ /* struct spi_device spi_dev; */
+ int chip;
+
+ /* The number of the irq. Set to zero if polling is required. */
+ int irq;
+
+ /* The type of the irq (e.g., IRQF_TRIGGER_FALLING). Only valid if
+ * irq != 0 */
+ int irq_type;
+
+ /* Use this to specify non-default settings on a per function basis. */
+ struct rmi_functiondata_list *perfunctiondata;
+};
+
+#endif
diff --git a/drivers/input/touchscreen/rmi_platformdata.h b/drivers/input/touchscreen/rmi_platformdata.h
new file mode 100644
index 0000000..3352381
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_platformdata.h
@@ -0,0 +1,93 @@
+/**
+ *
+ * Synaptics RMI platform data definitions for use in board files.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#if !defined(RMI_PLATFORMDATA_H)
+#define RMI_PLATFORMDATA_H
+
+#define RMI_F01_INDEX 0x01
+#define RMI_F11_INDEX 0x11
+#define RMI_F19_INDEX 0x19
+#define RMI_F34_INDEX 0x34
+
+
+/* A couple of structs that are useful for frequently occuring constructs, such
+ * as coordinate origin offsets or coordinate clipping values.
+ */
+struct rmi_XY_pair {
+ int x;
+ int y;
+};
+
+struct rmi_range {
+ int min;
+ int max;
+};
+
+/* This contains the per-function customization for a given function. We store
+ * the data this way in order to avoid allocating a large sparse array - typically
+ * only a few functions are present on a sensor, and even fewer will be have
+ * custom settings. There is a very small penalty paid for doing a linear
+ * search through the list to find a given function's data, but since the list
+ * is typically very short and is searched only at system boot time, this is
+ * considered acceptable.
+ *
+ * When adding new fields to a functiondata struct, please follow these rules:
+ * - Where possible, use 0 to indicate that the value should be defaulted.
+ * This works pretty well for bools, ints, and chars.
+ * - Where this is not practical (for example, in coordinate offsets or
+ * range clipping), use a pointer. Set that pointer to null to indicate
+ * that the value should be defaulted.
+ */
+struct rmi_functiondata {
+ unsigned char function_index;
+ void *data;
+};
+
+/* This can be included in the platformdata for SPI or I2C RMI4 devices to
+ * customize the settings of the functions on a given sensor.
+ */
+struct rmi_functiondata_list {
+ unsigned char count; /* Number of elements in the array */
+ struct rmi_functiondata *functiondata;
+};
+
+struct rmi_f11_functiondata {
+ bool swap_axes;
+ bool flipX;
+ bool flipY;
+ struct rmi_XY_pair *offset;
+ struct rmi_range *clipX;
+ struct rmi_range *clipY;
+};
+
+struct rmi_button_map {
+ unsigned char nbuttons;
+ unsigned char *map;
+};
+
+struct rmi_f19_functiondata {
+ struct rmi_button_map *button_map;
+};
+
+#endif
\ No newline at end of file
diff --git a/drivers/input/touchscreen/rmi_drvr.h b/drivers/input/touchscreen/rmi_drvr.h
new file mode 100644
index 0000000..460e25a
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_drvr.h
@@ -0,0 +1,96 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) RMI Driver Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include "rmi.h"
+
+#ifndef _RMI_DRVR_H
+#define _RMI_DRVR_H
+
+#include "rmi_platformdata.h"
+
+/* RMI4 Protocol Support
+ */
+
+struct rmi_phys_driver {
+ char *name;
+ int (*write)(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char data);
+ int (*read)(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *buffer);
+ int (*write_multiple)(struct rmi_phys_driver *physdrvr,
+ unsigned short address, char *buffer, int length);
+ int (*read_multiple)(struct rmi_phys_driver *physdrvr, unsigned short address,
+ char *buffer, int length);
+ void (*attention)(struct rmi_phys_driver *physdrvr, int instance);
+ bool polling_required;
+ int irq;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head drivers;
+ struct rmi_sensor_driver *sensor;
+ struct module *module;
+};
+
+int rmi_read(struct rmi_sensor_driver *sensor, unsigned short address, char *dest);
+int rmi_write(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char data);
+int rmi_read_multiple(struct rmi_sensor_driver *sensor, unsigned short address,
+ char *dest, int length);
+int rmi_write_multiple(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char *data, int length);
+int rmi_register_sensor(struct rmi_phys_driver *physdrvr,
+ struct rmi_functiondata_list *perfunctiondata);
+int rmi_unregister_sensors(struct rmi_phys_driver *physdrvr);
+
+/* Set this to 1 to turn on code used in detecting buffer leaks. */
+#define RMI_ALLOC_STATS 1
+
+#if RMI_ALLOC_STATS
+extern int appallocsrmi;
+extern int rfiallocsrmi;
+extern int fnallocsrmi;
+
+#define INC_ALLOC_STAT(X) (X##allocsrmi++)
+#define DEC_ALLOC_STAT(X) \
+ do { \
+ if (X##allocsrmi) X##allocsrmi--; \
+ else printk(KERN_DEBUG "Too many " #X " frees\n"); \
+ } while (0)
+#define CHECK_ALLOC_STAT(X) \
+ do { \
+ if (X##allocsrmi) \
+ printk(KERN_DEBUG "Left over " #X " buffers: %d\n", \
+ X##allocsrmi); \
+ } while (0)
+#else
+#define INC_ALLOC_STAT(X) do { } while (0)
+#define DEC_ALLOC_STAT(X) do { } while (0)
+#define CHECK_ALLOC_STAT(X) do { } while (0)
+#endif
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
