Re: [PATCH] Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mike, Michael,

On Wed, Mar 23, 2011 at 12:05:16PM -0400, Mike Frysinger wrote:
> From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> 
> From http://www.analog.com/ADP5589:
> The ADP5589 is an I/O port expander and keypad matrix decoder designed
> for QWERTY type phones that require a large keypad matrix and expanded
> I/O lines.
> 

Looks mostly good, just a few comments below.

However the biggest question is if it could be folded into
adp5588-keys.c as they look somewhat similar.

> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
> ---
>  drivers/input/keyboard/Kconfig        |   10 +
>  drivers/input/keyboard/Makefile       |    1 +
>  drivers/input/keyboard/adp5589-keys.c |  769 +++++++++++++++++++++++++++++++++
>  include/linux/input/adp5589.h         |  213 +++++++++
>  4 files changed, 993 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/keyboard/adp5589-keys.c
>  create mode 100644 include/linux/input/adp5589.h
> 
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index b16bed0..688a55c 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -32,6 +32,16 @@ config KEYBOARD_ADP5588
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called adp5588-keys.
>  
> +config KEYBOARD_ADP5589
> +	tristate "ADP5589 I2C QWERTY Keypad and IO Expander"
> +	depends on I2C
> +	help
> +	  Say Y here if you want to use a ADP5589 attached to your
> +	  system I2C bus.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called adp5589-keys.
> +
>  config KEYBOARD_AMIGA
>  	tristate "Amiga keyboard"
>  	depends on AMIGA
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 878e6c2..f57425c 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -6,6 +6,7 @@
>  
>  obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
>  obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
> +obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
>  obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
>  obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
>  obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
> diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
> new file mode 100644
> index 0000000..ab7a880
> --- /dev/null
> +++ b/drivers/input/keyboard/adp5589-keys.c
> @@ -0,0 +1,769 @@
> +/*
> + * Description:  keypad driver for ADP5589
> + *		 I2C QWERTY Keypad and IO Expander
> + * Bugs: Enter bugs at http://blackfin.uclinux.org/
> + *
> + * Copyright (C) 2010-2011 Analog Devices Inc.
> + * Licensed under the GPL-2.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/version.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/workqueue.h>
> +#include <linux/errno.h>
> +#include <linux/pm.h>
> +#include <linux/platform_device.h>
> +#include <linux/input.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +
> +#include <linux/input/adp5589.h>
> +
> +/* GENERAL_CFG Register */
> +#define OSC_EN		(1 << 7)
> +#define CORE_CLK(x)	(((x) & 0x3) << 5)
> +#define LCK_TRK_LOGIC	(1 << 4)
> +#define LCK_TRK_GPI	(1 << 3)
> +#define INT_CFG		(1 << 1)
> +#define RST_CFG		(1 << 0)
> +
> +/* INT_EN Register */
> +#define LOGIC2_IEN	(1 << 5)
> +#define LOGIC1_IEN	(1 << 4)
> +#define LOCK_IEN	(1 << 3)
> +#define OVRFLOW_IEN	(1 << 2)
> +#define GPI_IEN		(1 << 1)
> +#define EVENT_IEN	(1 << 0)
> +
> +/* Interrupt Status Register */
> +#define LOGIC2_INT	(1 << 5)
> +#define LOGIC1_INT	(1 << 4)
> +#define LOCK_INT	(1 << 3)
> +#define OVRFLOW_INT	(1 << 2)
> +#define GPI_INT		(1 << 1)
> +#define EVENT_INT	(1 << 0)
> +
> +/* STATUS Register */
> +
> +#define LOGIC2_STAT	(1 << 7)
> +#define LOGIC1_STAT	(1 << 6)
> +#define LOCK_STAT	(1 << 5)
> +#define KEC		0xF
> +
> +/* PIN_CONFIG_D Register */
> +#define C4_EXTEND_CFG	(1 << 6)	/* RESET2 */
> +#define R4_EXTEND_CFG	(1 << 5)	/* RESET1 */
> +
> +/* LOCK_CFG */
> +#define LOCK_EN		(1 << 0)
> +
> +#define PTIME_MASK	0x3
> +#define LTIME_MASK	0x3
> +
> +/* Key Event Register xy */
> +#define KEY_EV_PRESSED		(1 << 7)
> +#define KEY_EV_MASK		(0x7F)
> +
> +#define KEYP_MAX_EVENT		16
> +
> +#define MAXGPIO			19
> +#define ADP_BANK(offs)		((offs) >> 3)
> +#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
> +
> +struct adp5589_kpad {
> +	struct i2c_client *client;
> +	struct input_dev *input;
> +	unsigned short keycode[ADP5589_KEYMAPSIZE];
> +	const struct adp5589_gpi_map *gpimap;
> +	unsigned short gpimapsize;
> +	unsigned extend_cfg;
> +#ifdef CONFIG_GPIOLIB
> +	unsigned char gpiomap[MAXGPIO];
> +	bool export_gpio;
> +	struct gpio_chip gc;
> +	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
> +	u8 dat_out[3];
> +	u8 dir[3];
> +#endif
> +};
> +
> +static int adp5589_read(struct i2c_client *client, u8 reg)
> +{
> +	int ret = i2c_smbus_read_byte_data(client, reg);
> +
> +	if (ret < 0)
> +		dev_err(&client->dev, "Read Error\n");
> +
> +	return ret;
> +}
> +
> +static int adp5589_write(struct i2c_client *client, u8 reg, u8 val)
> +{
> +	return i2c_smbus_write_byte_data(client, reg, val);
> +}
> +
> +#ifdef CONFIG_GPIOLIB
> +static int adp5589_gpio_get_value(struct gpio_chip *chip, unsigned off)
> +{
> +	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
> +	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
> +	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
> +
> +	return !!(adp5589_read(kpad->client, ADP5589_GPI_STATUS_A + bank) &
> +		  bit);
> +}
> +
> +static void adp5589_gpio_set_value(struct gpio_chip *chip,
> +				   unsigned off, int val)
> +{
> +	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
> +	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
> +	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
> +
> +	mutex_lock(&kpad->gpio_lock);
> +
> +	if (val)
> +		kpad->dat_out[bank] |= bit;
> +	else
> +		kpad->dat_out[bank] &= ~bit;
> +
> +	adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank,
> +		      kpad->dat_out[bank]);
> +
> +	mutex_unlock(&kpad->gpio_lock);
> +}
> +
> +static int adp5589_gpio_direction_input(struct gpio_chip *chip, unsigned off)
> +{
> +	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
> +	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
> +	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
> +	int ret;
> +
> +	mutex_lock(&kpad->gpio_lock);
> +
> +	kpad->dir[bank] &= ~bit;
> +	ret =
> +	    adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank,
> +			  kpad->dir[bank]);
> +
> +	mutex_unlock(&kpad->gpio_lock);
> +
> +	return ret;
> +}
> +
> +static int adp5589_gpio_direction_output(struct gpio_chip *chip,
> +					 unsigned off, int val)
> +{
> +	struct adp5589_kpad *kpad = container_of(chip, struct adp5589_kpad, gc);
> +	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
> +	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
> +	int ret;
> +
> +	mutex_lock(&kpad->gpio_lock);
> +
> +	kpad->dir[bank] |= bit;
> +
> +	if (val)
> +		kpad->dat_out[bank] |= bit;
> +	else
> +		kpad->dat_out[bank] &= ~bit;
> +
> +	ret = adp5589_write(kpad->client, ADP5589_GPO_DATA_OUT_A + bank,
> +			    kpad->dat_out[bank]);
> +	ret |= adp5589_write(kpad->client, ADP5589_GPIO_DIRECTION_A + bank,
> +			     kpad->dir[bank]);
> +
> +	mutex_unlock(&kpad->gpio_lock);
> +
> +	return ret;
> +}
> +
> +static int __devinit adp5589_build_gpiomap(struct adp5589_kpad *kpad,
> +				const struct adp5589_kpad_platform_data *pdata)
> +{
> +	bool pin_used[MAXGPIO];
> +	int n_unused = 0;
> +	int i;
> +
> +	memset(pin_used, false, sizeof(pin_used));
> +
> +	for (i = 0; i < MAXGPIO; i++)
> +		if (pdata->keypad_en_mask & (1 << i))
> +			pin_used[i] = true;
> +
> +	for (i = 0; i < kpad->gpimapsize; i++)
> +		pin_used[kpad->gpimap[i].pin - ADP5589_GPI_PIN_BASE] = true;
> +
> +	if (kpad->extend_cfg & R4_EXTEND_CFG)
> +		pin_used[4] = true;
> +
> +	if (kpad->extend_cfg & C4_EXTEND_CFG)
> +		pin_used[12] = true;
> +
> +	for (i = 0; i < MAXGPIO; i++)
> +		if (!pin_used[i])
> +			kpad->gpiomap[n_unused++] = i;
> +
> +	return n_unused;
> +}
> +
> +static int __devinit adp5589_gpio_add(struct adp5589_kpad *kpad)
> +{
> +	struct device *dev = &kpad->client->dev;
> +	const struct adp5589_kpad_platform_data *pdata = dev->platform_data;
> +	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
> +	int i, error;
> +
> +	if (!gpio_data)
> +		return 0;
> +
> +	kpad->gc.ngpio = adp5589_build_gpiomap(kpad, pdata);
> +	if (kpad->gc.ngpio == 0) {
> +		dev_info(dev, "No unused gpios left to export\n");
> +		return 0;
> +	}
> +
> +	kpad->export_gpio = true;
> +
> +	kpad->gc.direction_input = adp5589_gpio_direction_input;
> +	kpad->gc.direction_output = adp5589_gpio_direction_output;
> +	kpad->gc.get = adp5589_gpio_get_value;
> +	kpad->gc.set = adp5589_gpio_set_value;
> +	kpad->gc.can_sleep = 1;
> +
> +	kpad->gc.base = gpio_data->gpio_start;
> +	kpad->gc.label = kpad->client->name;
> +	kpad->gc.owner = THIS_MODULE;
> +
> +	mutex_init(&kpad->gpio_lock);
> +
> +	error = gpiochip_add(&kpad->gc);
> +	if (error) {
> +		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
> +		return error;
> +	}
> +
> +	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
> +		kpad->dat_out[i] = adp5589_read(kpad->client,
> +						ADP5589_GPO_DATA_OUT_A + i);
> +		kpad->dir[i] =
> +		    adp5589_read(kpad->client, ADP5589_GPIO_DIRECTION_A + i);
> +	}
> +
> +	if (gpio_data->setup) {
> +		error = gpio_data->setup(kpad->client,
> +					 kpad->gc.base, kpad->gc.ngpio,
> +					 gpio_data->context);
> +		if (error)
> +			dev_warn(dev, "setup failed, %d\n", error);
> +	}
> +
> +	return 0;
> +}
> +
> +static void __devexit adp5589_gpio_remove(struct adp5589_kpad *kpad)
> +{
> +	struct device *dev = &kpad->client->dev;
> +	const struct adp5589_kpad_platform_data *pdata = dev->platform_data;
> +	const struct adp5589_gpio_platform_data *gpio_data = pdata->gpio_data;
> +	int error;
> +
> +	if (!kpad->export_gpio)
> +		return;
> +
> +	if (gpio_data->teardown) {
> +		error = gpio_data->teardown(kpad->client,
> +					    kpad->gc.base, kpad->gc.ngpio,
> +					    gpio_data->context);
> +		if (error)
> +			dev_warn(dev, "teardown failed %d\n", error);
> +	}
> +
> +	error = gpiochip_remove(&kpad->gc);
> +	if (error)
> +		dev_warn(dev, "gpiochip_remove failed %d\n", error);
> +}
> +#else
> +static inline int adp5589_gpio_add(struct adp5589_kpad *kpad)
> +{
> +	return 0;
> +}
> +
> +static inline void adp5589_gpio_remove(struct adp5589_kpad *kpad)
> +{
> +}
> +#endif
> +
> +static void adp5589_report_events(struct adp5589_kpad *kpad, int ev_cnt)
> +{
> +	int i, j;
> +
> +	for (i = 0; i < ev_cnt; i++) {
> +		int key = adp5589_read(kpad->client, ADP5589_FIFO_1 + i);
> +		int key_val = key & KEY_EV_MASK;
> +
> +		if (key_val >= ADP5589_GPI_PIN_BASE
> +		    && key_val <= ADP5589_GPI_PIN_END) {
> +			for (j = 0; j < kpad->gpimapsize; j++) {
> +				if (key_val == kpad->gpimap[j].pin) {
> +					input_report_switch(kpad->input,
> +							    kpad->gpimap[j].
> +							    sw_evt,
> +							    key &
> +							    KEY_EV_PRESSED);
> +					break;
> +				}
> +			}
> +		} else {
> +			input_report_key(kpad->input,
> +					 kpad->keycode[key_val - 1],
> +					 key & KEY_EV_PRESSED);
> +		}
> +	}
> +}
> +
> +static irqreturn_t adp5589_irq(int irq, void *handle)
> +{
> +	struct adp5589_kpad *kpad = handle;
> +	struct i2c_client *client = kpad->client;
> +	int status, ev_cnt;
> +
> +	status = adp5589_read(client, ADP5589_INT_STATUS);
> +
> +	if (status & OVRFLOW_INT)	/* Unlikely and should never happen */
> +		dev_err(&client->dev, "Event Overflow Error\n");
> +
> +	if (status & EVENT_INT) {
> +		ev_cnt = adp5589_read(client, ADP5589_STATUS) & KEC;
> +		if (ev_cnt) {
> +			adp5589_report_events(kpad, ev_cnt);
> +			input_sync(kpad->input);
> +		}
> +	}
> +	adp5589_write(client, ADP5589_INT_STATUS, status);	/* Status is W1C */
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int __devinit adp5589_get_evcode(struct adp5589_kpad *kpad, unsigned short key)
> +{
> +	int i;
> +	for (i = 0; i < ADP5589_KEYMAPSIZE; i++)
> +		if (key == kpad->keycode[i])
> +			return (i + 1) | KEY_EV_PRESSED;
> +
> +	dev_err(&kpad->client->dev, "RESET/UNLOCK key not in keycode map\n");
> +	return -EINVAL;
> +}
> +static int __devinit adp5589_setup(struct adp5589_kpad *kpad)
> +{
> +	struct i2c_client *client = kpad->client;
> +	const struct adp5589_kpad_platform_data *pdata =
> +	    client->dev.platform_data;
> +	int i, ret;
> +	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
> +	unsigned char pull_mask = 0;
> +
> +	ret = adp5589_write(client, ADP5589_PIN_CONFIG_A,
> +			    pdata->keypad_en_mask & 0xFF);
> +	ret |= adp5589_write(client, ADP5589_PIN_CONFIG_B,
> +			     (pdata->keypad_en_mask >> 8) & 0xFF);
> +	ret |= adp5589_write(client, ADP5589_PIN_CONFIG_C,
> +			     (pdata->keypad_en_mask >> 16) & 0xFF);
> +
> +	if (pdata->en_keylock) {
> +		ret |= adp5589_write(client, ADP5589_UNLOCK1,
> +				     pdata->unlock_key1);
> +		ret |= adp5589_write(client, ADP5589_UNLOCK2,
> +				     pdata->unlock_key2);
> +		ret |= adp5589_write(client, ADP5589_UNLOCK_TIMERS,
> +				     pdata->unlock_timer & LTIME_MASK);
> +		ret |= adp5589_write(client, ADP5589_LOCK_CFG, LOCK_EN);
> +	}
> +
> +	for (i = 0; i < KEYP_MAX_EVENT; i++)
> +		ret |= adp5589_read(client, ADP5589_FIFO_1 + i);
> +
> +	for (i = 0; i < pdata->gpimapsize; i++) {
> +		unsigned short pin = pdata->gpimap[i].pin;
> +
> +		if (pin <= ADP5589_GPI_PIN_ROW_END) {
> +			evt_mode1 |= (1 << (pin - ADP5589_GPI_PIN_ROW_BASE));
> +		} else {
> +			evt_mode2 |=
> +			    ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) & 0xFF);
> +			evt_mode3 |=
> +			    ((1 << (pin - ADP5589_GPI_PIN_COL_BASE)) >> 8);
> +		}
> +	}
> +
> +	if (pdata->gpimapsize) {
> +		ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_A, evt_mode1);
> +		ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_B, evt_mode2);
> +		ret |= adp5589_write(client, ADP5589_GPI_EVENT_EN_C, evt_mode3);
> +	}
> +
> +	if (pdata->pull_dis_mask & pdata->pullup_en_100k &
> +	    pdata->pullup_en_300k & pdata->pulldown_en_300k)
> +		dev_warn(&client->dev, "Conflicting pull resistor config\n");
> +
> +	for (i = 0; i < MAXGPIO; i++) {
> +		unsigned val = 0;
> +		if (pdata->pullup_en_300k & (1 << i))
> +			val = 0;
> +		else if (pdata->pulldown_en_300k & (1 << i))
> +			val = 1;
> +		else if (pdata->pullup_en_100k & (1 << i))
> +			val = 2;
> +		else if (pdata->pull_dis_mask & (1 << i))
> +			val = 3;
> +
> +		pull_mask |= val << (2 * (i & 0x3));
> +
> +		if (((i & 0x3) == 0x3) || (i == (MAXGPIO - 1))) {
> +			ret |= adp5589_write(client,
> +					     ADP5589_RPULL_CONFIG_A + (i >> 2),
> +					     pull_mask);
> +			pull_mask = 0;
> +		}
> +	}
> +
> +	if (pdata->reset1_key_1 && pdata->reset1_key_2 &&
> +		pdata->reset1_key_3) {
> +		ret |= adp5589_write(client, ADP5589_RESET1_EVENT_A,
> +				     adp5589_get_evcode(kpad,
> +				     pdata->reset1_key_1));
> +		ret |= adp5589_write(client, ADP5589_RESET1_EVENT_B,
> +				     adp5589_get_evcode(kpad,
> +				     pdata->reset1_key_2));
> +		ret |= adp5589_write(client, ADP5589_RESET1_EVENT_C,
> +				     adp5589_get_evcode(kpad,
> +				     pdata->reset1_key_3));
> +		kpad->extend_cfg |= R4_EXTEND_CFG;
> +	}
> +
> +	if (pdata->reset2_key_1 && pdata->reset2_key_2) {
> +		ret |= adp5589_write(client, ADP5589_RESET2_EVENT_A,
> +				     adp5589_get_evcode(kpad,
> +				     pdata->reset2_key_1));
> +		ret |= adp5589_write(client, ADP5589_RESET2_EVENT_B,
> +				     adp5589_get_evcode(kpad,
> +				     pdata->reset2_key_2));
> +		kpad->extend_cfg |= C4_EXTEND_CFG;
> +	}
> +
> +	if (kpad->extend_cfg) {
> +		ret |= adp5589_write(client, ADP5589_RESET_CFG,
> +				     pdata->reset_cfg);
> +		ret |= adp5589_write(client, ADP5589_PIN_CONFIG_D,
> +				     kpad->extend_cfg);
> +	}
> +
> +	for (i = 0; i <= ADP_BANK(MAXGPIO); i++)
> +		ret |= adp5589_write(client, ADP5589_DEBOUNCE_DIS_A + i,
> +				     pdata->debounce_dis_mask >> (i * 8));
> +
> +	ret |= adp5589_write(client, ADP5589_POLL_PTIME_CFG,
> +			     pdata->scan_cycle_time & PTIME_MASK);
> +	ret |= adp5589_write(client, ADP5589_INT_STATUS, LOGIC2_INT |
> +			     LOGIC1_INT | OVRFLOW_INT | LOCK_INT |
> +			     GPI_INT | EVENT_INT);	/* Status is W1C */
> +
> +	ret |= adp5589_write(client, ADP5589_GENERAL_CFG,
> +			     INT_CFG | OSC_EN | CORE_CLK(3));
> +	ret |= adp5589_write(client, ADP5589_INT_EN,
> +			     OVRFLOW_IEN | GPI_IEN | EVENT_IEN);
> +
> +	if (ret < 0) {
> +		dev_err(&client->dev, "Write Error\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void __devinit adp5589_report_switch_state(struct adp5589_kpad *kpad)
> +{
> +	int gpi_stat1 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_A);
> +	int gpi_stat2 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_B);
> +	int gpi_stat3 = adp5589_read(kpad->client, ADP5589_GPI_STATUS_C);
> +	int gpi_stat_tmp, pin_loc;
> +	int i;
> +
> +	for (i = 0; i < kpad->gpimapsize; i++) {
> +		unsigned short pin = kpad->gpimap[i].pin;
> +
> +		if (pin <= ADP5589_GPI_PIN_ROW_END) {
> +			gpi_stat_tmp = gpi_stat1;
> +			pin_loc = pin - ADP5589_GPI_PIN_ROW_BASE;
> +		} else if ((pin - ADP5589_GPI_PIN_COL_BASE) < 8) {
> +			gpi_stat_tmp = gpi_stat2;
> +			pin_loc = pin - ADP5589_GPI_PIN_COL_BASE;
> +		} else {
> +			gpi_stat_tmp = gpi_stat3;
> +			pin_loc = pin - ADP5589_GPI_PIN_COL_BASE - 8;
> +		}
> +
> +		if (gpi_stat_tmp < 0) {
> +			dev_err(&kpad->client->dev,
> +				"Can't read GPIO_DAT_STAT switch"
> +				" %d default to OFF\n", pin);
> +			gpi_stat_tmp = 0;
> +		}
> +
> +		input_report_switch(kpad->input,
> +				    kpad->gpimap[i].sw_evt,
> +				    !(gpi_stat_tmp & (1 << pin_loc)));
> +	}
> +
> +	input_sync(kpad->input);
> +}
> +
> +static int __devinit adp5589_probe(struct i2c_client *client,
> +				   const struct i2c_device_id *id)
> +{
> +	struct adp5589_kpad *kpad;
> +	const struct adp5589_kpad_platform_data *pdata =
> +	    client->dev.platform_data;
> +	struct input_dev *input;
> +	unsigned int revid;
> +	int ret, i;
> +	int error;
> +
> +	if (!i2c_check_functionality(client->adapter,
> +				     I2C_FUNC_SMBUS_BYTE_DATA)) {
> +		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
> +		return -EIO;
> +	}
> +
> +	if (!pdata) {
> +		dev_err(&client->dev, "no platform data?\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!((pdata->keypad_en_mask & 0xFF) &&
> +		(pdata->keypad_en_mask >> 8)) || !pdata->keymap) {
> +		dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
> +		return -EINVAL;
> +	}
> +
> +	if (pdata->keymapsize != ADP5589_KEYMAPSIZE) {
> +		dev_err(&client->dev, "invalid keymapsize\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!pdata->gpimap && pdata->gpimapsize) {
> +		dev_err(&client->dev, "invalid gpimap from pdata\n");
> +		return -EINVAL;
> +	}
> +
> +	if (pdata->gpimapsize > ADP5589_GPIMAPSIZE_MAX) {
> +		dev_err(&client->dev, "invalid gpimapsize\n");
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < pdata->gpimapsize; i++) {
> +		unsigned short pin = pdata->gpimap[i].pin;
> +
> +		if (pin < ADP5589_GPI_PIN_BASE || pin > ADP5589_GPI_PIN_END) {
> +			dev_err(&client->dev, "invalid gpi pin data\n");
> +			return -EINVAL;
> +		}
> +
> +		if ((1 << (pin - ADP5589_GPI_PIN_ROW_BASE)) &
> +			pdata->keypad_en_mask) {
> +			dev_err(&client->dev, "invalid gpi row/col data\n");
> +			return -EINVAL;
> +		}
> +	}
> +
> +	if (!client->irq) {
> +		dev_err(&client->dev, "no IRQ?\n");
> +		return -EINVAL;
> +	}
> +
> +	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
> +	input = input_allocate_device();
> +	if (!kpad || !input) {
> +		error = -ENOMEM;
> +		goto err_free_mem;
> +	}
> +
> +	kpad->client = client;
> +	kpad->input = input;
> +
> +	ret = adp5589_read(client, ADP5589_ID);
> +	if (ret < 0) {
> +		error = ret;
> +		goto err_free_mem;
> +	}
> +
> +	revid = (u8) ret & ADP5589_DEVICE_ID_MASK;
> +
> +	input->name = client->name;
> +	input->phys = "adp5589-keys/input0";
> +	input->dev.parent = &client->dev;
> +
> +	input_set_drvdata(input, kpad);
> +
> +	input->id.bustype = BUS_I2C;
> +	input->id.vendor = 0x0001;
> +	input->id.product = 0x0001;
> +	input->id.version = revid;
> +
> +	input->keycodesize = sizeof(kpad->keycode[0]);
> +	input->keycodemax = pdata->keymapsize;
> +	input->keycode = kpad->keycode;
> +
> +	memcpy(kpad->keycode, pdata->keymap,
> +	       pdata->keymapsize * input->keycodesize);
> +
> +	kpad->gpimap = pdata->gpimap;
> +	kpad->gpimapsize = pdata->gpimapsize;
> +
> +	/* setup input device */
> +	__set_bit(EV_KEY, input->evbit);
> +
> +	if (pdata->repeat)
> +		__set_bit(EV_REP, input->evbit);
> +
> +	for (i = 0; i < input->keycodemax; i++)
> +		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
> +	__clear_bit(KEY_RESERVED, input->keybit);
> +
> +	if (kpad->gpimapsize)
> +		__set_bit(EV_SW, input->evbit);
> +	for (i = 0; i < kpad->gpimapsize; i++)
> +		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
> +
> +	error = input_register_device(input);
> +	if (error) {
> +		dev_err(&client->dev, "unable to register input device\n");
> +		goto err_free_mem;
> +	}
> +
> +	error = request_threaded_irq(client->irq, NULL, adp5589_irq,
> +				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +				     client->dev.driver->name, kpad);
> +	if (error) {
> +		dev_err(&client->dev, "irq %d busy?\n", client->irq);
> +		goto err_unreg_dev;
> +	}
> +
> +	error = adp5589_setup(kpad);
> +	if (error)
> +		goto err_free_irq;
> +
> +	if (kpad->gpimapsize)
> +		adp5589_report_switch_state(kpad);
> +
> +	error = adp5589_gpio_add(kpad);
> +	if (error)
> +		goto err_free_irq;
> +
> +	device_init_wakeup(&client->dev, 1);
> +	i2c_set_clientdata(client, kpad);
> +
> +	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
> +	return 0;
> +
> +err_free_irq:
> +	free_irq(client->irq, kpad);
> +err_unreg_dev:
> +	input_unregister_device(input);
> +	input = NULL;
> +err_free_mem:
> +	input_free_device(input);
> +	kfree(kpad);
> +
> +	return error;
> +}
> +
> +static int __devexit adp5589_remove(struct i2c_client *client)
> +{
> +	struct adp5589_kpad *kpad = i2c_get_clientdata(client);
> +
> +	adp5589_write(client, ADP5589_GENERAL_CFG, 0);
> +	free_irq(client->irq, kpad);
> +	input_unregister_device(kpad->input);
> +	adp5589_gpio_remove(kpad);
> +	kfree(kpad);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM

CONFIG_PM_SLEEP

> +static int adp5589_suspend(struct device *dev)
> +{
> +	struct adp5589_kpad *kpad = dev_get_drvdata(dev);
> +	struct i2c_client *client = kpad->client;
> +
> +	disable_irq(client->irq);
> +
> +	if (device_may_wakeup(&client->dev))
> +		enable_irq_wake(client->irq);
> +
> +	return 0;
> +}
> +
> +static int adp5589_resume(struct device *dev)
> +{
> +	struct adp5589_kpad *kpad = dev_get_drvdata(dev);
> +	struct i2c_client *client = kpad->client;
> +
> +	if (device_may_wakeup(&client->dev))
> +		disable_irq_wake(client->irq);
> +
> +	enable_irq(client->irq);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops adp5589_dev_pm_ops = {
> +	.suspend = adp5589_suspend,
> +	.resume = adp5589_resume,
> +};
> +#endif

Just use unguarded

static SIMPLE_DEV_PM_OPS(adp5589_dev_pm_ops, adp5589_suspend, adp5589_resume);

> +
> +static const struct i2c_device_id adp5589_id[] = {
> +	{"adp5589-keys", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, adp5589_id);
> +
> +static struct i2c_driver adp5589_driver = {
> +	.driver = {
> +		   .name = KBUILD_MODNAME,
> +#ifdef CONFIG_PM
> +		   .pm = &adp5589_dev_pm_ops,
> +#endif
		.owner ?
> +		   },

Identation seems wrong.

> +	.probe = adp5589_probe,
> +	.remove = __devexit_p(adp5589_remove),
> +	.id_table = adp5589_id,
> +};
> +
> +static int __init adp5589_init(void)
> +{
> +	return i2c_add_driver(&adp5589_driver);
> +}
> +
> +module_init(adp5589_init);
> +
> +static void __exit adp5589_exit(void)
> +{
> +	i2c_del_driver(&adp5589_driver);
> +}
> +
> +module_exit(adp5589_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ADP5589 Keypad driver");
> +MODULE_ALIAS("i2c:adp5589-keys");

This is not needed since you define MODULE_DEVICE_TABLE()

> diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h
> new file mode 100644
> index 0000000..998d148
> --- /dev/null
> +++ b/include/linux/input/adp5589.h
> @@ -0,0 +1,213 @@
> +/*
> + * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller
> + *
> + * Copyright 2010-2011 Analog Devices Inc.
> + *
> + * Licensed under the GPL-2.
> + */
> +
> +#ifndef _ADP5589_H
> +#define _ADP5589_H
> +
> +#define ADP5589_ID			0x00
> +#define ADP5589_INT_STATUS		0x01
> +#define ADP5589_STATUS			0x02
> +#define ADP5589_FIFO_1			0x03
> +#define ADP5589_FIFO_2			0x04
> +#define ADP5589_FIFO_3			0x05
> +#define ADP5589_FIFO_4			0x06
> +#define ADP5589_FIFO_5			0x07
> +#define ADP5589_FIFO_6			0x08
> +#define ADP5589_FIFO_7			0x09
> +#define ADP5589_FIFO_8			0x0A
> +#define ADP5589_FIFO_9			0x0B
> +#define ADP5589_FIFO_10			0x0C
> +#define ADP5589_FIFO_11			0x0D
> +#define ADP5589_FIFO_12			0x0E
> +#define ADP5589_FIFO_13			0x0F
> +#define ADP5589_FIFO_14			0x10
> +#define ADP5589_FIFO_15			0x11
> +#define ADP5589_FIFO_16			0x12
> +#define ADP5589_GPI_INT_STAT_A		0x13
> +#define ADP5589_GPI_INT_STAT_B		0x14
> +#define ADP5589_GPI_INT_STAT_C		0x15
> +#define ADP5589_GPI_STATUS_A		0x16
> +#define ADP5589_GPI_STATUS_B		0x17
> +#define ADP5589_GPI_STATUS_C		0x18
> +#define ADP5589_RPULL_CONFIG_A		0x19
> +#define ADP5589_RPULL_CONFIG_B		0x1A
> +#define ADP5589_RPULL_CONFIG_C		0x1B
> +#define ADP5589_RPULL_CONFIG_D		0x1C
> +#define ADP5589_RPULL_CONFIG_E		0x1D
> +#define ADP5589_GPI_INT_LEVEL_A		0x1E
> +#define ADP5589_GPI_INT_LEVEL_B		0x1F
> +#define ADP5589_GPI_INT_LEVEL_C		0x20
> +#define ADP5589_GPI_EVENT_EN_A		0x21
> +#define ADP5589_GPI_EVENT_EN_B		0x22
> +#define ADP5589_GPI_EVENT_EN_C		0x23
> +#define ADP5589_GPI_INTERRUPT_EN_A	0x24
> +#define ADP5589_GPI_INTERRUPT_EN_B	0x25
> +#define ADP5589_GPI_INTERRUPT_EN_C	0x26
> +#define ADP5589_DEBOUNCE_DIS_A		0x27
> +#define ADP5589_DEBOUNCE_DIS_B		0x28
> +#define ADP5589_DEBOUNCE_DIS_C		0x29
> +#define ADP5589_GPO_DATA_OUT_A		0x2A
> +#define ADP5589_GPO_DATA_OUT_B		0x2B
> +#define ADP5589_GPO_DATA_OUT_C		0x2C
> +#define ADP5589_GPO_OUT_MODE_A		0x2D
> +#define ADP5589_GPO_OUT_MODE_B		0x2E
> +#define ADP5589_GPO_OUT_MODE_C		0x2F
> +#define ADP5589_GPIO_DIRECTION_A	0x30
> +#define ADP5589_GPIO_DIRECTION_B	0x31
> +#define ADP5589_GPIO_DIRECTION_C	0x32
> +#define ADP5589_UNLOCK1			0x33
> +#define ADP5589_UNLOCK2			0x34
> +#define ADP5589_EXT_LOCK_EVENT		0x35
> +#define ADP5589_UNLOCK_TIMERS		0x36
> +#define ADP5589_LOCK_CFG		0x37
> +#define ADP5589_RESET1_EVENT_A		0x38
> +#define ADP5589_RESET1_EVENT_B		0x39
> +#define ADP5589_RESET1_EVENT_C		0x3A
> +#define ADP5589_RESET2_EVENT_A		0x3B
> +#define ADP5589_RESET2_EVENT_B		0x3C
> +#define ADP5589_RESET_CFG		0x3D
> +#define ADP5589_PWM_OFFT_LOW		0x3E
> +#define ADP5589_PWM_OFFT_HIGH		0x3F
> +#define ADP5589_PWM_ONT_LOW		0x40
> +#define ADP5589_PWM_ONT_HIGH		0x41
> +#define ADP5589_PWM_CFG			0x42
> +#define ADP5589_CLOCK_DIV_CFG		0x43
> +#define ADP5589_LOGIC_1_CFG		0x44
> +#define ADP5589_LOGIC_2_CFG		0x45
> +#define ADP5589_LOGIC_FF_CFG		0x46
> +#define ADP5589_LOGIC_INT_EVENT_EN	0x47
> +#define ADP5589_POLL_PTIME_CFG		0x48
> +#define ADP5589_PIN_CONFIG_A		0x49
> +#define ADP5589_PIN_CONFIG_B		0x4A
> +#define ADP5589_PIN_CONFIG_C		0x4B
> +#define ADP5589_PIN_CONFIG_D		0x4C
> +#define ADP5589_GENERAL_CFG		0x4D
> +#define ADP5589_INT_EN			0x4E
> +
> +#define ADP5589_DEVICE_ID_MASK	0xF
> +
> +/* Put one of these structures in i2c_board_info platform_data */
> +
> +#define ADP5589_KEYMAPSIZE	88
> +
> +#define ADP5589_GPI_PIN_ROW0 97
> +#define ADP5589_GPI_PIN_ROW1 98
> +#define ADP5589_GPI_PIN_ROW2 99
> +#define ADP5589_GPI_PIN_ROW3 100
> +#define ADP5589_GPI_PIN_ROW4 101
> +#define ADP5589_GPI_PIN_ROW5 102
> +#define ADP5589_GPI_PIN_ROW6 103
> +#define ADP5589_GPI_PIN_ROW7 104
> +#define ADP5589_GPI_PIN_COL0 105
> +#define ADP5589_GPI_PIN_COL1 106
> +#define ADP5589_GPI_PIN_COL2 107
> +#define ADP5589_GPI_PIN_COL3 108
> +#define ADP5589_GPI_PIN_COL4 109
> +#define ADP5589_GPI_PIN_COL5 110
> +#define ADP5589_GPI_PIN_COL6 111
> +#define ADP5589_GPI_PIN_COL7 112
> +#define ADP5589_GPI_PIN_COL8 113
> +#define ADP5589_GPI_PIN_COL9 114
> +#define ADP5589_GPI_PIN_COL10 115
> +#define GPI_LOGIC1 116
> +#define GPI_LOGIC2 117
> +
> +#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0
> +#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7
> +#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0
> +#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10
> +
> +#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE
> +#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END
> +
> +#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1)
> +
> +struct adp5589_gpi_map {
> +	unsigned short pin;
> +	unsigned short sw_evt;
> +};
> +
> +/* scan_cycle_time */
> +#define ADP5589_SCAN_CYCLE_10ms		0
> +#define ADP5589_SCAN_CYCLE_20ms		1
> +#define ADP5589_SCAN_CYCLE_30ms		2
> +#define ADP5589_SCAN_CYCLE_40ms		3
> +
> +/* RESET_CFG */
> +#define RESET_PULSE_WIDTH_500us		0
> +#define RESET_PULSE_WIDTH_1ms		1
> +#define RESET_PULSE_WIDTH_2ms		2
> +#define RESET_PULSE_WIDTH_10ms		3
> +
> +#define RESET_TRIG_TIME_0ms		(0 << 2)
> +#define RESET_TRIG_TIME_1000ms		(1 << 2)
> +#define RESET_TRIG_TIME_1500ms		(2 << 2)
> +#define RESET_TRIG_TIME_2000ms		(3 << 2)
> +#define RESET_TRIG_TIME_2500ms		(4 << 2)
> +#define RESET_TRIG_TIME_3000ms		(5 << 2)
> +#define RESET_TRIG_TIME_3500ms		(6 << 2)
> +#define RESET_TRIG_TIME_4000ms		(7 << 2)
> +
> +#define RESET_PASSTHRU_EN		(1 << 5)
> +#define RESET1_POL_HIGH			(1 << 6)
> +#define RESET1_POL_LOW			(0 << 6)
> +#define RESET2_POL_HIGH			(1 << 7)
> +#define RESET2_POL_LOW			(0 << 7)
> +
> +/* Mask Bits:
> + * C C C C C C C C C C C | R R R R R R R R
> + * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0
> + * 0
> + * ---------------- BIT ------------------
> + * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0
> + * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0
> + */
> +
> +#define ADP_ROW(x)			(1 << (x))
> +#define ADP_COL(x)			(1 << (x + 8))

Is this used anywhere?

> +
> +struct adp5589_kpad_platform_data {
> +	unsigned keypad_en_mask;	/* Keypad (Rows/Columns) enable mask */
> +	const unsigned short *keymap;	/* Pointer to keymap */
> +	unsigned short keymapsize;	/* Keymap size */
> +	unsigned repeat:1;		/* Enable key repeat */
> +	unsigned en_keylock:1;		/* Enable key lock feature */

Maybe use bools? You are not saving any space with bitfields as far as
I can see...

> +	unsigned char unlock_key1;	/* Unlock Key 1 */
> +	unsigned char unlock_key2;	/* Unlock Key 2 */
> +	unsigned char unlock_timer;	/* Time in seconds [0..7] between the two unlock keys 0=disable */
> +	unsigned char scan_cycle_time;	/* Time between consecutive scan cycles */
> +	unsigned char reset_cfg;	/* Reset config */
> +	unsigned short reset1_key_1;	/* Reset Key 1 */
> +	unsigned short reset1_key_2;	/* Reset Key 2 */
> +	unsigned short reset1_key_3;	/* Reset Key 3 */
> +	unsigned short reset2_key_1;	/* Reset Key 1 */
> +	unsigned short reset2_key_2;	/* Reset Key 2 */
> +	unsigned debounce_dis_mask;	/* Disable debounce mask */
> +	unsigned pull_dis_mask;		/* Disable all pull resistors mask */
> +	unsigned pullup_en_100k;	/* Pull-Up 100k Enable Mask */
> +	unsigned pullup_en_300k;	/* Pull-Up 300k Enable Mask */
> +	unsigned pulldown_en_300k;	/* Pull-Down 300k Enable Mask */
> +	const struct adp5589_gpi_map *gpimap;
> +	unsigned short gpimapsize;
> +	const struct adp5589_gpio_platform_data *gpio_data;
> +};
> +
> +struct i2c_client; /* forward declaration */
> +
> +struct adp5589_gpio_platform_data {
> +	int	gpio_start;	/* GPIO Chip base # */
> +	int	(*setup)(struct i2c_client *client,
> +				int gpio, unsigned ngpio,
> +				void *context);
> +	int	(*teardown)(struct i2c_client *client,
> +				int gpio, unsigned ngpio,
> +				void *context);
> +	void	*context;
> +};
> +
> +#endif
> -- 
> 1.7.4.1
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux