On Thu, Feb 10, 2011 at 05:32:42PM -0800, Ping Cheng wrote:
> There are two types of 1FGT devices supported in wacom_wac.c.
> Changing them to follow the existing touchscreen format, i.e.,
> only report BTN_TOUCH as a valid tool type.
>
> Touch data will be ignored if pen is in proximity. This requires
> a touch up sent if touch was down when pen comes in. The touch up
> event should be sent before any pen events emitted. Otherwise,
> two pointers would race for the cursor.
>
> However, we can not send a touch up inside wacom_tpc_pen since
> pen and touch are on different logical port. That is why we
> have to check if touch is up before sending pen events.
>
> Reviewed-by: Chris Bagwell <chris@xxxxxxxxxxxxxx>
> Signed-off-by: Ping Cheng <pingc@xxxxxxxxx>
> ---
Hi Ping,
> drivers/input/tablet/wacom_wac.c | 125 +++++++++++++------------------------
> drivers/input/tablet/wacom_wac.h | 1 +
> 2 files changed, 45 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
> index 15bab99..fc0669d 100644
> --- a/drivers/input/tablet/wacom_wac.c
> +++ b/drivers/input/tablet/wacom_wac.c
> @@ -675,51 +675,35 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
> return 1;
> }
>
> -static void wacom_tpc_touch_out(struct wacom_wac *wacom, int idx)
> -{
> - struct input_dev *input = wacom->input;
> - int finger = idx + 1;
> -
> - input_report_abs(input, ABS_X, 0);
> - input_report_abs(input, ABS_Y, 0);
> - input_report_abs(input, ABS_MISC, 0);
> - input_report_key(input, wacom->tool[finger], 0);
> - if (!idx)
> - input_report_key(input, BTN_TOUCH, 0);
> - input_event(input, EV_MSC, MSC_SERIAL, finger);
> - input_sync(input);
> -}
> -
> -static void wacom_tpc_touch_in(struct wacom_wac *wacom, size_t len)
> +static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
> {
> char *data = wacom->data;
> struct input_dev *input = wacom->input;
> + bool prox = 0;
>
> - wacom->tool[1] = BTN_TOOL_DOUBLETAP;
> - wacom->id[0] = TOUCH_DEVICE_ID;
> -
> - if (len != WACOM_PKGLEN_TPC1FG) {
> -
> - switch (data[0]) {
> + if (!wacom->shared->stylus_in_proximity) {
> + if (len == WACOM_PKGLEN_TPC1FG)
> + prox = data[0] & 0x01;
> + else /* with capacity */
> + prox = data[1] & 0x01;
> + } else if (wacom->shared->touch_down)
> + prox = 0;
> + else
> + return 0;
>
> - case WACOM_REPORT_TPC1FG:
> - input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
> - input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
> - input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
> - input_report_key(input, BTN_TOUCH, le16_to_cpup((__le16 *)&data[6]));
> - input_report_abs(input, ABS_MISC, wacom->id[0]);
> - input_report_key(input, wacom->tool[1], 1);
> - input_sync(input);
> - break;
> - }
> - } else {
> + if (len == WACOM_PKGLEN_TPC1FG) {
> input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
> input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
> - input_report_key(input, BTN_TOUCH, 1);
> - input_report_abs(input, ABS_MISC, wacom->id[1]);
> - input_report_key(input, wacom->tool[1], 1);
> - input_sync(input);
> + } else {
> + input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
> + input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
> }
> + input_report_key(input, BTN_TOUCH, prox);
> +
> + /* keep prox bit to send proper out-prox event */
> + wacom->shared->touch_down = prox;
> +
> + return 1;
> }
>
> static int wacom_tpc_pen(struct wacom_wac *wacom)
> @@ -731,7 +715,7 @@ static int wacom_tpc_pen(struct wacom_wac *wacom)
>
> prox = data[1] & 0x20;
>
> - if (!wacom->shared->stylus_in_proximity) { /* first in prox */
> + if (!wacom->shared->stylus_in_proximity) {
> /* Going into proximity select tool */
> wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
> if (wacom->tool[0] == BTN_TOOL_PEN)
> @@ -740,58 +724,36 @@ static int wacom_tpc_pen(struct wacom_wac *wacom)
> wacom->id[0] = ERASER_DEVICE_ID;
>
> wacom->shared->stylus_in_proximity = true;
Relying on additional events coming in to execute the part below this
comment is not causing any troubles, then?
> + } else if (!wacom->shared->touch_down) {
> + input_report_key(input, BTN_STYLUS, data[1] & 0x02);
> + input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
> + input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
> + input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
> + pressure = ((data[7] & 0x01) << 8) | data[6];
> + if (pressure < 0)
> + pressure = features->pressure_max + pressure + 1;
And that conversion again...
> + input_report_abs(input, ABS_PRESSURE, pressure);
> + input_report_key(input, BTN_TOUCH, data[1] & 0x05);
> + if (!prox) { /* out-prox */
> + wacom->id[0] = 0;
> + wacom->shared->stylus_in_proximity = false;
> + }
> + input_report_key(input, wacom->tool[0], prox);
> + return 1;
> }
> - input_report_key(input, BTN_STYLUS, data[1] & 0x02);
> - input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
> - input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
> - input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
> - pressure = ((data[7] & 0x01) << 8) | data[6];
> - if (pressure < 0)
> - pressure = features->pressure_max + pressure + 1;
> - input_report_abs(input, ABS_PRESSURE, pressure);
> - input_report_key(input, BTN_TOUCH, data[1] & 0x05);
> - if (!prox) { /* out-prox */
> - wacom->id[0] = 0;
> - wacom->shared->stylus_in_proximity = false;
> - }
> - input_report_key(input, wacom->tool[0], prox);
>
> - return 1;
> + return 0;
> }
>
> static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
> {
> char *data = wacom->data;
> - int prox = 0;
>
> dbg("wacom_tpc_irq: received report #%d", data[0]);
>
> - if (len == WACOM_PKGLEN_TPC1FG ||
> - data[0] == WACOM_REPORT_TPC1FG) { /* single touch */
> -
> - if (wacom->shared->stylus_in_proximity) {
> - if (wacom->id[1] & 0x01)
> - wacom_tpc_touch_out(wacom, 0);
> -
> - wacom->id[1] = 0;
> - return 0;
> - }
> -
> - if (len == WACOM_PKGLEN_TPC1FG)
> - prox = data[0] & 0x01;
> - else /* with capacity */
> - prox = data[1] & 0x01;
> -
> - if (prox)
> - wacom_tpc_touch_in(wacom, len);
> - else {
> - wacom_tpc_touch_out(wacom, 0);
> -
> - wacom->id[0] = 0;
> - }
> - /* keep prox bit to send proper out-prox event */
> - wacom->id[1] = prox;
> - } else if (data[0] == WACOM_REPORT_PENABLED)
> + if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG)
> + return wacom_tpc_single_touch(wacom, len);
> + else if (data[0] == WACOM_REPORT_PENABLED)
> return wacom_tpc_pen(wacom);
>
> return 0;
> @@ -1172,6 +1134,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
> /* fall through */
>
> case TABLETPC:
> + __clear_bit(ABS_MISC, input_dev->absbit);
> +
> if (features->device_type == BTN_TOOL_DOUBLETAP ||
> features->device_type == BTN_TOOL_TRIPLETAP) {
> input_abs_set_res(input_dev, ABS_X,
> @@ -1180,7 +1144,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
> input_abs_set_res(input_dev, ABS_Y,
> wacom_calculate_touch_res(features->y_max,
> features->y_phy));
> - __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
Where is doubletap set now?
> }
>
> if (features->device_type != BTN_TOOL_PEN)
> diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
> index 8f747dd..835f756 100644
> --- a/drivers/input/tablet/wacom_wac.h
> +++ b/drivers/input/tablet/wacom_wac.h
> @@ -88,6 +88,7 @@ struct wacom_features {
>
> struct wacom_shared {
> bool stylus_in_proximity;
> + bool touch_down;
> };
>
> struct wacom_wac {
> --
Thanks,
Henrik
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
