gpio_pendown in ads7846_probe is not getting initalized (defaulted to 0) resulting in gpio_free to be called without a gpio_request. This results in the following backtrace in bootup. ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1258 gpio_free+0x100/0x12c() Modules linked in: [<c0061208>] (unwind_backtrace+0x0/0xe4) from [<c0091f58>] (warn_slowpath_common+0x4c/0x64) [<c0091f58>] (warn_slowpath_common+0x4c/0x64) from [<c0091f88>] (warn_slowpath_null+0x18/0x1c) [<c0091f88>] (warn_slowpath_null+0x18/0x1c) from [<c024e610>] (gpio_free+0x100/0x12c) [<c024e610>] (gpio_free+0x100/0x12c) from [<c03e9fbc>] (ads7846_probe+0xa38/0xc5c) [<c03e9fbc>] (ads7846_probe+0xa38/0xc5c) from [<c02cff14>] (spi_drv_probe+0x18/0x1c) [<c02cff14>] (spi_drv_probe+0x18/0x1c) from [<c028bca4>] (driver_probe_device+0xc8/0x184) [<c028bca4>] (driver_probe_device+0xc8/0x184) from [<c028bdc8>] (__driver_attach+0x68/0x8c) [<c028bdc8>] (__driver_attach+0x68/0x8c) from [<c028b4c8>] (bus_for_each_dev+0x48/0x74) [<c028b4c8>] (bus_for_each_dev+0x48/0x74) from [<c028ae08>] (bus_add_driver+0xa0/0x220) [<c028ae08>] (bus_add_driver+0xa0/0x220) from [<c028c0c0>] (driver_register+0xa8/0x134) [<c028c0c0>] (driver_register+0xa8/0x134) from [<c0050550>] (do_one_initcall+0xcc/0x1a4) [<c0050550>] (do_one_initcall+0xcc/0x1a4) from [<c00084e4>] (kernel_init+0x14c/0x214) [<c00084e4>] (kernel_init+0x14c/0x214) from [<c005b494>] (kernel_thread_exit+0x0/0x8) ---[ end trace 4053287f8a5ec18f ]--- Initializing gpio_pendown in ads7846_probe to -1 before ads7846_setup_pendown function removes the above backtrace warning. Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- drivers/input/touchscreen/ads7846.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 14ea54b..036f245 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1221,6 +1221,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->input = input_dev; ts->vref_mv = pdata->vref_mv; ts->swap_xy = pdata->swap_xy; + ts->gpio_pendown = -1; mutex_init(&ts->lock); init_waitqueue_head(&ts->wait); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
