[PATCH] input: joystick: Adding Austria Microsystem AS5011 joystick driver (third version)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Driver for EasyPoint AS5011 2 axis joystick chip. This chip is plugged
 on an I2C bus. It has been tested on ARM processor (i.MX27).

Third version, according to Dmitry Torokhov and Trilok Soni comments.


Signed-off-by: Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>
---
 drivers/input/joystick/Kconfig  |    9 +
 drivers/input/joystick/Makefile |    1 +
 drivers/input/joystick/as5011.c |  377 +++++++++++++++++++++++++++++++++++++++
 include/linux/as5011.h          |   35 ++++
 4 files changed, 422 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/joystick/as5011.c
 create mode 100644 include/linux/as5011.h

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 5b59616..5fad03e 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -255,6 +255,15 @@ config JOYSTICK_AMIGA
 	  To compile this driver as a module, choose M here: the
 	  module will be called amijoy.

+config JOYSTICK_AS5011
+	tristate "Austria Microsystem AS5011 joystick"
+	depends on I2C
+	help
+	  Say Y here if you have an AS5011 digital joystick.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called as5011.
+
 config JOYSTICK_JOYDUMP
 	tristate "Gameport data dumper"
 	select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index f3a8cbe..92dc0de 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -7,6 +7,7 @@
 obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
 obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
 obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
+obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
 obj-$(CONFIG_JOYSTICK_ANALOG)		+= analog.o
 obj-$(CONFIG_JOYSTICK_COBRA)		+= cobra.o
 obj-$(CONFIG_JOYSTICK_DB9)		+= db9.o
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
new file mode 100644
index 0000000..066a125
--- /dev/null
+++ b/drivers/input/joystick/as5011.c
@@ -0,0 +1,377 @@
+/*
+ * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>
+ * Sponsored by ARMadeus Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Driver for Austria Microsystems joysticks AS5011
+ *
+ * TODO:
+ *	- Manage power mode
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <linux/as5011.h>
+#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
+#define MODULE_DEVICE_ALIAS "as5011"
+
+MODULE_AUTHOR("Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/* registers */
+#define AS5011_CTRL1		0x76
+#define AS5011_CTRL2		0x75
+#define AS5011_XP		0x43
+#define AS5011_XN		0x44
+#define AS5011_YP		0x53
+#define AS5011_YN		0x54
+#define AS5011_X_REG		0x41
+#define AS5011_Y_REG		0x42
+#define AS5011_X_RES_INT	0x51
+#define AS5011_Y_RES_INT	0x52
+
+/* CTRL1 bits */
+#define AS5011_CTRL1_LP_PULSED		0x80
+#define AS5011_CTRL1_LP_ACTIVE		0x40
+#define AS5011_CTRL1_LP_CONTINUE	0x20
+#define AS5011_CTRL1_INT_WUP_EN		0x10
+#define AS5011_CTRL1_INT_ACT_EN		0x08
+#define AS5011_CTRL1_EXT_CLK_EN		0x04
+#define AS5011_CTRL1_SOFT_RST		0x02
+#define AS5011_CTRL1_DATA_VALID		0x01
+
+/* CTRL2 bits */
+#define AS5011_CTRL2_EXT_SAMPLE_EN	0x08
+#define AS5011_CTRL2_RC_BIAS_ON		0x04
+#define AS5011_CTRL2_INV_SPINNING	0x02
+
+#define SIZE_NAME 30
+#define SIZE_EVENT_PATH 40
+#define AS5011_MAX_AXIS	80
+#define AS5011_MIN_AXIS	(-80)
+#define AS5011_FUZZ	8
+#define AS5011_FLAT	40
+
+static int as5011_i2c_write(struct i2c_client *client,
+			    uint8_t aregaddr,
+			    uint8_t avalue)
+{
+	int ret;
+	uint8_t data[2] = { aregaddr, avalue };
+
+	struct i2c_msg msg = {	client->addr,
+				I2C_M_IGNORE_NAK,
+				2,
+				(uint8_t *)data };
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+
+	if (ret < 0)
+		return ret;
+	return 1;
+}
+
+static signed char as5011_i2c_read(struct i2c_client *client,
+			   uint8_t aregaddr)
+{
+	int ret;
+	uint8_t data[2];
+	struct i2c_msg msg_set[2];
+	struct i2c_msg msg1 = {	client->addr,
+				I2C_M_REV_DIR_ADDR,
+				1,
+				(uint8_t *)data};
+	struct i2c_msg msg2 = {	client->addr,
+				I2C_M_RD|I2C_M_NOSTART,
+				1,
+				(uint8_t *)data};
+
+	data[0] = aregaddr;
+	msg_set[0] = msg1;
+	msg_set[1] = msg2;
+	ret = i2c_transfer(client->adapter, msg_set, 2);
+	if (ret < 0)
+		return ret;
+
+	if (data[0] & 0x80)
+		return -1*(1+(~data[0]));
+	else
+		return data[0];
+}
+
+static irqreturn_t button_interrupt(int irq, void *dev_id)
+{
+	struct as5011_platform_data *plat_dat = dev_id;
+	int ret;
+
+	ret = gpio_get_value(plat_dat->button_gpio);
+	if (ret)
+		input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 0);
+	else
+		input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 1);
+	input_sync(plat_dat->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static void as5011_update_axes(struct as5011_platform_data *plat_dat)
+{
+	signed char x, y;
+
+	x = as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
+	y = as5011_i2c_read(plat_dat->i2c_client, AS5011_Y_RES_INT);
+	input_report_abs(plat_dat->input_dev, ABS_X, x);
+	input_report_abs(plat_dat->input_dev, ABS_Y, y);
+	input_sync(plat_dat->input_dev);
+}
+
+static irqreturn_t as5011_int_interrupt(int irq, void *dev_id)
+{
+	struct as5011_platform_data *plat_dat = dev_id;
+
+	mutex_lock(&plat_dat->update_lock);
+	as5011_update_axes(plat_dat);
+	mutex_unlock(&plat_dat->update_lock);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit as5011_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct as5011_platform_data *plat_dat = client->dev.platform_data;
+	int retval = 0;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_PROTOCOL_MANGLING)) {
+		dev_err(&client->dev,
+		"i2c bus does not support protocol mangling, as5011 can't work\n");
+		retval = -ENODEV;
+		goto err_out;
+	}
+	plat_dat->i2c_client = client;
+
+
+	plat_dat->input_dev = input_allocate_device();
+	if (plat_dat->input_dev == NULL) {
+		dev_err(&client->dev,
+		"not enough memory for input devices structure\n");
+		retval = -ENOMEM;
+		goto err_out;
+	}
+
+	plat_dat->input_dev->name = "Austria Microsystem as5011 joystick";
+	plat_dat->input_dev->id.bustype = BUS_I2C;
+	__set_bit(EV_KEY, plat_dat->input_dev->evbit);
+	__set_bit(EV_ABS, plat_dat->input_dev->evbit);
+	__set_bit(BTN_JOYSTICK, plat_dat->input_dev->keybit);
+
+	input_set_abs_params(plat_dat->input_dev,
+			     ABS_X,
+			     AS5011_MIN_AXIS,
+			     AS5011_MAX_AXIS,
+			     AS5011_FUZZ,
+			     AS5011_FLAT);
+	input_set_abs_params(plat_dat->input_dev,
+			     ABS_Y,
+			     AS5011_MIN_AXIS,
+			     AS5011_MAX_AXIS,
+			     AS5011_FUZZ,
+			     AS5011_FLAT);
+
+	retval = request_threaded_irq(plat_dat->button_irq,
+					NULL, button_interrupt,
+					0, "as5011_button",
+					plat_dat);
+	if (retval < 0) {
+		dev_err(&client->dev, "Can't allocate irq %d\n",
+			plat_dat->button_irq);
+		retval = -EBUSY;
+		goto err_input_free_device;
+	}
+
+	if (plat_dat->init_gpio != NULL) {
+		retval = plat_dat->init_gpio();
+		if (retval < 0) {
+			dev_err(&client->dev, "Failed to init gpios\n");
+			goto err_free_irq_button_interrupt;
+		}
+	}
+
+	/* chip soft reset */
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_CTRL1,
+				  AS5011_CTRL1_SOFT_RST);
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Soft reset failed\n");
+		goto err_exit_gpio;
+	}
+
+	mdelay(10);
+
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_CTRL1,
+				  AS5011_CTRL1_LP_PULSED |
+				  AS5011_CTRL1_LP_ACTIVE |
+				  AS5011_CTRL1_INT_ACT_EN
+				  );
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Power config failed\n");
+		goto err_exit_gpio;
+	}
+
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_CTRL2,
+				  AS5011_CTRL2_INV_SPINNING);
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Can't invert spinning\n");
+		goto err_exit_gpio;
+	}
+
+	/* write threshold */
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_XP,
+				  plat_dat->xp);
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Can't write threshold\n");
+		goto err_exit_gpio;
+	}
+
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_XN,
+				  plat_dat->xn);
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Can't write threshold\n");
+		goto err_exit_gpio;
+	}
+
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_YP,
+				  plat_dat->yp);
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Can't write threshold\n");
+		goto err_exit_gpio;
+	}
+
+	retval = as5011_i2c_write(plat_dat->i2c_client,
+				  AS5011_YN,
+				  plat_dat->yn);
+	if (retval < 0) {
+		dev_err(&plat_dat->i2c_client->dev,
+			"Can't write threshold\n");
+		goto err_exit_gpio;
+	}
+
+	/* to free irq gpio in chip*/
+	as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
+
+	/* initialize mutex */
+	mutex_init(&plat_dat->update_lock);
+
+	if (request_threaded_irq(plat_dat->int_irq, NULL,
+				as5011_int_interrupt,
+				0, "as5011_joystick", plat_dat)) {
+		dev_err(&client->dev, "Can't allocate int irq %d\n",
+			plat_dat->int_irq);
+		retval = -EBUSY;
+		goto err_exit_gpio;
+	}
+
+	retval = input_register_device(plat_dat->input_dev);
+	if (retval) {
+		dev_err(&client->dev, "Failed to register device\n");
+		goto err_free_irq_int;
+	}
+
+	return 0;
+
+	/* Error management */
+err_free_irq_int:
+	free_irq(plat_dat->int_irq, as5011_int_interrupt);
+err_exit_gpio:
+	if (plat_dat->exit_gpio != NULL)
+		plat_dat->exit_gpio();
+err_free_irq_button_interrupt:
+	free_irq(plat_dat->button_irq, button_interrupt);
+err_input_free_device:
+	input_free_device(plat_dat->input_dev);
+err_out:
+	return retval;
+}
+static int as5011_remove(struct i2c_client *client)
+{
+	struct as5011_platform_data *plat_dat = client->dev.platform_data;
+
+	input_unregister_device(plat_dat->input_dev);
+	free_irq(plat_dat->button_irq, plat_dat);
+	free_irq(plat_dat->int_irq, plat_dat);
+	if (plat_dat->exit_gpio != NULL)
+		plat_dat->exit_gpio();
+
+	return 0;
+}
+static const struct i2c_device_id as5011_id[] = {
+	{ MODULE_DEVICE_ALIAS, 0 },
+	{ }
+};
+
+static struct i2c_driver as5011_driver = {
+	.driver = {
+		.name = "as5011",
+	},
+	.probe		= as5011_probe,
+	.remove		= __devexit_p(as5011_remove),
+	.id_table	= as5011_id,
+};
+
+static int __init as5011_init(void)
+{
+	return i2c_add_driver(&as5011_driver);
+}
+
+static void __exit as5011_exit(void)
+{
+	i2c_del_driver(&as5011_driver);
+}
+
+module_init(as5011_init);
+module_exit(as5011_exit);
diff --git a/include/linux/as5011.h b/include/linux/as5011.h
new file mode 100644
index 0000000..48dfcb6
--- /dev/null
+++ b/include/linux/as5011.h
@@ -0,0 +1,35 @@
+#ifndef _AS5011_H
+#define _AS5011_H
+
+/*
+ * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/mutex.h>
+
+#define AS5011_MAX_NAME_LENGTH	64
+
+struct as5011_platform_data {
+	/* public */
+	int button_gpio;
+	int button_irq;
+	int int_gpio;
+	int int_irq;
+	char xp, xn; /* threshold for x axis */
+	char yp, yn; /* threshold for y axis */
+
+	int (*init_gpio)(void); /* init interrupts gpios */
+	void (*exit_gpio)(void);/* exit gpios */
+
+	/* private */
+	struct input_dev *input_dev;
+	struct i2c_client *i2c_client;
+	char name[AS5011_MAX_NAME_LENGTH];
+	struct mutex update_lock;
+};
+
+#endif /* _AS5011_H */
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux