Re: [PATCH] input: joystick: Adding Austria Microsystem AS5011 joystick driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Fabien,

A few comments --

On Tue, Nov 23, 2010 at 10:06 PM, Fabien Marteau
<fabien.marteau@xxxxxxxxxxxx> wrote:
> Driver for EasyPoint AS5011 2 axis joystick chip. This chip is plugged
> on an I2C bus. It as been tested on ARM processor (i.MX27).
>
> Signed-off-by: Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>
> ---
>  drivers/input/joystick/Kconfig  |    9 +
>  drivers/input/joystick/Makefile |    1 +
>  drivers/input/joystick/as5011.c |  454
> +++++++++++++++++++++++++++++++++++++++
>  include/linux/as5011.h          |   72 ++++++
>  4 files changed, 536 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/joystick/as5011.c
>  create mode 100644 include/linux/as5011.h
>
> diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
> index 5b59616..5fad03e 100644
> --- a/drivers/input/joystick/Kconfig
> +++ b/drivers/input/joystick/Kconfig
> @@ -255,6 +255,15 @@ config JOYSTICK_AMIGA
>          To compile this driver as a module, choose M here: the
>          module will be called amijoy.
>
> +config JOYSTICK_AS5011
> +       tristate "Austria Microsystem AS5011 joystick"
> +       depends on I2C
> +       help
> +         Say Y here if you have an AS5011 digital joystick.
> +
> +         To compile this driver as a module, choose M here: the
> +         module will be called as5011.
> +
>  config JOYSTICK_JOYDUMP
>        tristate "Gameport data dumper"
>        select GAMEPORT
> diff --git a/drivers/input/joystick/Makefile
> b/drivers/input/joystick/Makefile
> index f3a8cbe..92dc0de 100644
> --- a/drivers/input/joystick/Makefile
> +++ b/drivers/input/joystick/Makefile
> @@ -7,6 +7,7 @@
>  obj-$(CONFIG_JOYSTICK_A3D)             += a3d.o
>  obj-$(CONFIG_JOYSTICK_ADI)             += adi.o
>  obj-$(CONFIG_JOYSTICK_AMIGA)           += amijoy.o
> +obj-$(CONFIG_JOYSTICK_AS5011)          += as5011.o
>  obj-$(CONFIG_JOYSTICK_ANALOG)          += analog.o
>  obj-$(CONFIG_JOYSTICK_COBRA)           += cobra.o
>  obj-$(CONFIG_JOYSTICK_DB9)             += db9.o
> diff --git a/drivers/input/joystick/as5011.c
> b/drivers/input/joystick/as5011.c
> new file mode 100644
> index 0000000..db0f129
> --- /dev/null
> +++ b/drivers/input/joystick/as5011.c
> @@ -0,0 +1,454 @@
> +/*
> + * Copyright (c) 2010 Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>
> + *
> + * Sponsored by ARMadeus Systems
> + */
> +
> +/*
> + * Driver for Austria Microsystems joysticks AS5011
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + * TODO:
> + *     - Manage power mode
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/string.h>
> +#include <linux/list.h>
> +#include <linux/sysfs.h>
> +#include <linux/ctype.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/mutex.h>
> +
> +#include <linux/input.h>
> +#include <linux/gpio.h>
> +#include <linux/workqueue.h>
> +
> +#include <linux/as5011.h>
> +#define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick"
> +
> +MODULE_AUTHOR("Fabien Marteau <fabien.marteau@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> +
> +#define SIZE_NAME 30
> +#define AS5011_MAX_AXIS        80
> +#define AS5011_MIN_AXIS        (-80)
> +#define AS5011_FUZZ    8
> +#define AS5011_FLAT    40
> +
> +static int g_num = 1; /* device counter */
> +
> +static signed char as5011_i2c_read(struct i2c_client *client,
> +                          uint8_t aRegAddr);
> +static int as5011_i2c_write(struct i2c_client *client,
> +                           uint8_t aRegAddr,
> +                           uint8_t aValue);
> +
> +/*
> + * interrupts operations
> + */
> +
> +static irqreturn_t button_interrupt(int irq, void *dev_id)
> +{
> +       struct as5011_platform_data *plat_dat =
> +               (struct as5011_platform_data *)dev_id;
> +       int ret;
> +
> +       ret = gpio_get_value(plat_dat->button_gpio);
> +       if (ret)
> +               input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 0);
> +       else
> +               input_report_key(plat_dat->input_dev, BTN_JOYSTICK, 1);
> +       input_sync(plat_dat->input_dev);
> +       return IRQ_HANDLED;
> +}
> +
> +static void as5011_update_axes(struct work_struct *work)
> +{
> +       struct as5011_platform_data *plat_dat =
> +               container_of(work,
> +                            struct as5011_platform_data,
> +                            update_axes_work);
> +       signed char x, y;
> +
> +       x = as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
> +       y = as5011_i2c_read(plat_dat->i2c_client, AS5011_Y_RES_INT);

What if the read call returns an error ?

> +       input_report_abs(plat_dat->input_dev, ABS_X, x);
> +       input_report_abs(plat_dat->input_dev, ABS_Y, y);
> +       input_sync(plat_dat->input_dev);
> +}
> +
> +static irqreturn_t as5011_int_interrupt(int irq, void *dev_id)
> +{
> +       struct as5011_platform_data *plat_dat =
> +               (struct as5011_platform_data *)dev_id;
> +
> +       queue_work(plat_dat->workqueue, &plat_dat->update_axes_work);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +/*
> + * I2C bus operation
> + */
> +
> +static int as5011_i2c_write(struct i2c_client *client,
> +                           uint8_t aRegAddr,
> +                           uint8_t aValue)
> +{
> +       int ret;
> +       uint8_t data[2] = { aRegAddr, aValue };
> +       struct i2c_msg msg = {  client->addr,
> +                               I2C_M_IGNORE_NAK,
> +                               2,
> +                               (uint8_t *)data };
> +
> +       ret = i2c_transfer(client->adapter, &msg, 1);
> +       if (ret < 0)
> +               return -EINVAL;
> +       return 1;
> +}
> +
> +static signed char as5011_i2c_read(struct i2c_client *client,
> +                          uint8_t aRegAddr)
> +{
> +       int ret;
> +       uint8_t data[2];
> +       struct i2c_msg msg_set[2];
> +       struct i2c_msg msg1 = { client->addr,
> +                               I2C_M_REV_DIR_ADDR,
> +                               1,
> +                               (uint8_t *)data};
> +       struct i2c_msg msg2 = { client->addr,
> +                               I2C_M_RD|I2C_M_NOSTART,
> +                               1,
> +                               (uint8_t *)data};
> +
> +       data[0] = aRegAddr;
> +       msg_set[0] = msg1;
> +       msg_set[1] = msg2;
> +
> +       ret = i2c_transfer(client->adapter, msg_set, 2);
> +       if (ret < 0)
> +               return -EINVAL;
> +
> +       if (data[0] & 0x80)
> +               return -1*(1+(~data[0]));
> +       else
> +               return data[0];
> +}
> +
> +static int as5011_probe(struct i2c_client *client,
> +                       const struct i2c_device_id *id)
> +{

__devinit as5011_probe()

> +       struct as5011_platform_data *plat_dat = client->dev.platform_data;
> +       int retval = 0;
> +
> +       plat_dat->num = g_num;
> +       g_num++;
> +
> +       retval = snprintf(plat_dat->workqueue_name,
> +                         SIZE_NAME,
> +                         "as5011_%d_workqueue", plat_dat->num);
> +       if (retval < 0) {
> +               dev_err(&client->dev, "as5011: Failed to give workqueue name\n");
> +               retval = -1;
> +               goto workqueue_name_error;
> +       }
> +       plat_dat->workqueue =
> +               create_singlethread_workqueue(plat_dat->workqueue_name);
> +       if (plat_dat->workqueue == NULL) {
> +               dev_err(&client->dev, "as5011: Failed to create workqueue\n");
> +               retval = -EINVAL;
> +               goto workqueue_create_error;
> +       }
> +
> +       INIT_WORK(&plat_dat->update_axes_work, as5011_update_axes);
> +
> +       if (!i2c_check_functionality(client->adapter,
> +                                    I2C_FUNC_PROTOCOL_MANGLING)) {
> +               dev_err(&client->dev,
> +               "i2c bus does not support protocol mangling, as5011 can't work\n");
> +               retval = -ENODEV;
> +               goto i2c_protocol_error;
> +       }
> +       plat_dat->i2c_client = client;
> +
> +       plat_dat->input_dev = input_allocate_device();
> +       if (plat_dat->input_dev < 0) {
> +               dev_err(&client->dev,
> +               "not enough memory for input devices structure\n");
> +               retval = -ENOMEM;
> +               goto input_allocate_device_error;
> +       }
> +
> +       plat_dat->input_dev->name = "Austria Microsystem as5011 joystick";
> +       plat_dat->input_dev->uniq = "Austria0";
> +       plat_dat->input_dev->id.bustype = BUS_I2C;
> +       plat_dat->input_dev->phys = "/dev/input/event0";
> +       plat_dat->input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
> +       plat_dat->input_dev->keybit[BIT_WORD(BTN_JOYSTICK)] =
> +                                       BIT_MASK(BTN_JOYSTICK);
> +
> +       input_set_abs_params(plat_dat->input_dev,
> +                            ABS_X,
> +                            AS5011_MIN_AXIS,
> +                            AS5011_MAX_AXIS,
> +                            AS5011_FUZZ,
> +                            AS5011_FLAT);
> +       input_set_abs_params(plat_dat->input_dev,
> +                            ABS_Y,
> +                            AS5011_MIN_AXIS,
> +                            AS5011_MAX_AXIS,
> +                            AS5011_FUZZ,
> +                            AS5011_FLAT);
> +
> +       plat_dat->button_irq_name =
> +               kmalloc(sizeof(unsigned char)*SIZE_NAME,
> +                                        GFP_KERNEL);
> +       if (plat_dat->button_irq_name == NULL) {
> +               dev_err(&client->dev,
> +               "not enough memory for input devices irq name\n");
> +               retval = -ENOMEM;
> +               goto input_allocate_device_name_error;
> +       }
> +
> +
> +       retval = snprintf(plat_dat->button_irq_name,
> +                         SIZE_NAME,
> +                         "as5011_%d_button",
> +                         plat_dat->num);
> +       if (retval < 0) {
> +               dev_err(&client->dev, "as5011: Failed to give button irq name\n");
> +               retval = -EINVAL;
> +               goto button_irq_name_error;
> +       }
> +
> +       if (request_irq(plat_dat->button_irq, button_interrupt,
> +                       0, plat_dat->button_irq_name, (void *)plat_dat)) {
> +               dev_err(&client->dev, "as5011: Can't allocate irq %d\n",
> +                       plat_dat->button_irq);
> +               retval = -EBUSY;
> +               goto request_irq_error;
> +       }
> +
> +       plat_dat->int_irq_name =
> +               kmalloc(sizeof(unsigned char)*SIZE_NAME,
> +                                        GFP_KERNEL);
> +       if (plat_dat->int_irq_name == NULL) {
> +               dev_err(&client->dev,
> +               "not enough memory for input devices int irq name\n");
> +               retval = -ENOMEM;
> +               goto input_allocate_int_device_name_error;
> +       }
> +
> +       retval = snprintf(plat_dat->int_irq_name,
> +                         SIZE_NAME,
> +                         "as5011_%d_int",
> +                         plat_dat->num);
> +       if (retval < 0) {
> +               dev_err(&client->dev, "as5011: Failed to give int irq name\n");
> +               retval = -EINVAL;
> +               goto int_irq_name_error;
> +       }
> +
> +
> +       if (request_irq(plat_dat->int_irq, as5011_int_interrupt,
> +                       0, plat_dat->int_irq_name, (void *)plat_dat)) {

How about using request_any_context_irq() ?

> +               dev_err(&client->dev, "as5011: Can't allocate int irq %d\n",
> +                       plat_dat->int_irq);
> +               retval = -EBUSY;
> +               goto request_int_irq_error;
> +       }
> +
> +       retval = input_register_device(plat_dat->input_dev);

Its better to register your device at the end, after all the initialization.

> +       if (retval) {
> +               dev_err(&client->dev, "as5011: Failed to register device\n");
> +               retval = -EINVAL;
> +               goto input_register_device_error;
> +       }
> +
> +       retval = plat_dat->init_gpio();

Please check if the function pointer is NULL.

> +       if (retval < 0) {
> +               dev_err(&client->dev, "as5011: Failed to init gpios\n");
> +               retval = -EINVAL;
> +               goto init_gpio_error;
> +       }
> +
> +       /* chip soft reset */
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_CTRL1,
> +                                 AS5011_CTRL1_SOFT_RST);
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: soft reset failed\n");
> +               retval = -EINVAL;
> +               goto soft_reset_error;
> +       }
> +
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_CTRL1,
> +                                 AS5011_CTRL1_LP_PULSED |
> +                                 AS5011_CTRL1_LP_ACTIVE |
> +                                 AS5011_CTRL1_INT_ACT_EN
> +                                 );
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: power config failed\n");
> +               retval = -EINVAL;
> +               goto soft_reset_error;
> +       }
> +
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_CTRL2,
> +                                 AS5011_CTRL2_INV_SPINNING);
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: can't invert spinning\n");
> +               retval = -EINVAL;
> +               goto invert_spinning_error;
> +       }
> +
> +       /* write threshold */
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_XP,
> +                                 plat_dat->Xp);
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: can't write threshold\n");
> +               retval = -EINVAL;
> +               goto threshold_error;
> +       }
> +
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_XN,
> +                                 plat_dat->Xn);
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: can't write threshold\n");
> +               retval = -EINVAL;
> +               goto threshold_error;
> +       }
> +
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_YP,
> +                                 plat_dat->Yp);
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: can't write threshold\n");
> +               retval = -EINVAL;
> +               goto threshold_error;
> +       }
> +
> +       retval = as5011_i2c_write(plat_dat->i2c_client,
> +                                 AS5011_YN,
> +                                 plat_dat->Yn);
> +       if (retval < 0) {
> +               dev_err(&plat_dat->i2c_client->dev,
> +                       "as5011: can't write threshold\n");
> +               retval = -EINVAL;
> +               goto threshold_error;
> +       }
> +
> +       /* to free irq gpio in chip*/
> +       as5011_i2c_read(plat_dat->i2c_client, AS5011_X_RES_INT);
> +
> +       queue_work(plat_dat->workqueue, &plat_dat->update_axes_work);
> +
> +       return 0;
> +
> +       /* Error management */
> +threshold_error:
> +invert_spinning_error:
> +soft_reset_error:
> +       plat_dat->exit_gpio();

Please check if the function pointer is NULL.

> +init_gpio_error:
> +       input_unregister_device(plat_dat->input_dev);
> +input_register_device_error:
> +       free_irq(plat_dat->int_irq, as5011_int_interrupt);
> +request_int_irq_error:
> +int_irq_name_error:
> +       kfree(plat_dat->int_irq_name);
> +input_allocate_int_device_name_error:
> +       free_irq(plat_dat->button_irq, button_interrupt);
> +request_irq_error:
> +button_irq_name_error:
> +       kfree(plat_dat->button_irq_name);
> +input_allocate_device_name_error:
> +       input_free_device(plat_dat->input_dev);
> +input_allocate_device_error:
> +i2c_protocol_error:
> +       destroy_workqueue(plat_dat->workqueue);
> +workqueue_create_error:
> +workqueue_name_error:
> +       return retval;
> +}
> +static int as5011_remove(struct i2c_client *client)
> +{
> +       struct as5011_platform_data *plat_dat = client->dev.platform_data;
> +
> +       destroy_workqueue(plat_dat->workqueue);
> +       input_unregister_device(plat_dat->input_dev);
> +       free_irq(plat_dat->button_irq, plat_dat);
> +       free_irq(plat_dat->int_irq, plat_dat);
> +       kfree(plat_dat->button_irq_name);
> +       input_free_device(plat_dat->input_dev);
> +       plat_dat->exit_gpio();

Same here.

> +
> +       return 0;
> +}
> +static const struct i2c_device_id as5011_id[] = {
> +       { "as5011", 0 },
> +       { }
> +};
> +
> +static struct i2c_driver as5011_driver = {
> +       .driver = {
> +               .name = "as5011",
> +       },
> +       .probe          = as5011_probe,
> +       .remove         = as5011_remove,

__devexit_p (as5011_remove)

> +       .id_table       = as5011_id,
> +};
> +
> +/*
> + * Module initialization
> + */
> +
> +static int __init as5011_init(void)
> +{
> +       return i2c_add_driver(&as5011_driver);
> +}
> +
> +static void __exit as5011_exit(void)
> +{
> +       i2c_del_driver(&as5011_driver);
> +}
> +
> +module_init(as5011_init);
> +module_exit(as5011_exit);
> diff --git a/include/linux/as5011.h b/include/linux/as5011.h
> new file mode 100644
> index 0000000..7db0a75
> --- /dev/null
> +++ b/include/linux/as5011.h
> @@ -0,0 +1,72 @@
> +#ifndef _AS5011_H
> +#define _AS5011_H
> +
> +/*
> + * Copyright (c) 2010 Fabien Marteau
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as
> published by
> + * the Free Software Foundation.
> + */
> +
> +#define AS5011_MAX_NAME_LENGTH 64
> +#define AS5011_MAX_CNAME_LENGTH        16
> +#define AS5011_MAX_PHYS_LENGTH 64
> +#define AS5011_MAX_LENGTH      64
> +
> +/* registers */
> +#define AS5011_CTRL1           0x76
> +#define AS5011_CTRL2           0x75
> +#define AS5011_XP              0x43
> +#define AS5011_XN              0x44
> +#define AS5011_YP              0x53
> +#define AS5011_YN              0x54
> +#define AS5011_X_REG           0x41
> +#define AS5011_Y_REG           0x42
> +#define AS5011_X_RES_INT       0x51
> +#define AS5011_Y_RES_INT       0x52
> +
> +/* CTRL1 bits */
> +#define AS5011_CTRL1_LP_PULSED         0x80
> +#define AS5011_CTRL1_LP_ACTIVE         0x40
> +#define AS5011_CTRL1_LP_CONTINUE       0x20
> +#define AS5011_CTRL1_INT_WUP_EN                0x10
> +#define AS5011_CTRL1_INT_ACT_EN                0x08
> +#define AS5011_CTRL1_EXT_CLK_EN                0x04
> +#define AS5011_CTRL1_SOFT_RST          0x02
> +#define AS5011_CTRL1_DATA_VALID                0x01
> +
> +/* CTRL2 bits */
> +#define AS5011_CTRL2_EXT_SAMPLE_EN     0x08
> +#define AS5011_CTRL2_RC_BIAS_ON                0x04
> +#define AS5011_CTRL2_INV_SPINNING      0x02
> +
> +
> +struct as5011_platform_data {
> +       /* public */
> +       int button_gpio;
> +       int button_irq;
> +       int int_gpio;
> +       int int_irq;
> +       char Xp, Xn; /* threshold for x axis */
> +       char Yp, Yn; /* threshold for y axis */
> +
> +       int (*init_gpio)(void); /* init interrupts gpios */
> +       void (*exit_gpio)(void);/* exit gpios */
> +
> +       /* private */
> +       int num;
> +       struct input_dev *input_dev;
> +       struct i2c_client *i2c_client;
> +       unsigned char *button_irq_name;
> +       unsigned char *int_irq_name;
> +       char name[AS5011_MAX_NAME_LENGTH];
> +       char cname[AS5011_MAX_CNAME_LENGTH];
> +       char phys[AS5011_MAX_PHYS_LENGTH];
> +       unsigned char data[AS5011_MAX_LENGTH];
> +       char workqueue_name[AS5011_MAX_NAME_LENGTH];
> +       struct workqueue_struct *workqueue;
> +       struct work_struct update_axes_work;
> +};
> +
> +#endif /* _AS5011_H */
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux