Hi Ben,
Thanks for the patches. Some comments/questions below:
On Wed, Nov 17, 2010 at 01:09:35, Ben Gardiner wrote:
> This patch adds EV_KEYs for each of the 8 pushbuttons on the UI board via a
> gpio-key device.
>
> The expander is a tca6416; it controls the SEL_{A,B,C} lines which enable and
> disable the peripherals found on the UI board in addition to the 8 pushbuttons
> mentioned above. The reason the existing tca6416-keypad driver is not employed
> is because there was no aparent way to keep the gpio lines used as
> SEL_{A,B,C} registered while simultaneously registering the pushbuttons as a
> tca6416-keypad instance.
>
> Some experimentation with the polling interval was performed; we were searching
> for the largest polling interval that did not affect the feel of the
> responsiveness of the buttons. It is very subjective but 200ms seems to be a
> good value that accepts firm pushes but rejects very light ones. The key values
> assigned to the buttons were arbitrarily chosen to be F1-F8.
>
> Signed-off-by: Ben Gardiner <bengardiner@xxxxxxxxxxxxxx>
> Reviewed-by: Chris Cordahi <christophercordahi@xxxxxxxxxxxxxx>
> CC: Govindarajan, Sriramakrishnan <srk@xxxxxx>
>
> ---
>
> Changes since v1:
> * set INPUT_POLLDEV default for DA850_EVM machine, but don't select it
> unconditionally
I didn't see the v1 posting (wonder why), but why is this
required? Why cant we depend on this being selected from
Device Drivers->Input device support in menuconfig?
[...]
> @@ -349,6 +421,10 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
> {
> I2C_BOARD_INFO("tca6416", 0x20),
> .platform_data = &da850_evm_ui_expander_info,
> + /*
> + * TODO : populate at runtime using
> + * .irq = gpio_to_irq(GPIO_TO_PIN(2,7)),
> + */
You seem to be adding this in this patch and removing
in 4/4.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
