Standardized message logging prefixes.
Removed \n from dbg macro, added \n to each dbg call site.
A couple of uses of dbg already had a \n.
Removed direct use of __FILE__ from dbg, converted to pr_fmt(fmt)
Added non-debug printf argument verification of dbg calls
Removed "i8042.c" from printks, converted to pr_<level>
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/input/serio/i8042.c | 94 ++++++++++++++++++++-----------------------
drivers/input/serio/i8042.h | 19 +++++---
2 files changed, 56 insertions(+), 57 deletions(-)
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 18db5a8..61ef34a 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -10,6 +10,8 @@
* the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/module.h>
@@ -225,8 +227,8 @@ static int i8042_flush(void)
udelay(50);
data = i8042_read_data();
i++;
- dbg("%02x <- i8042 (flush, %s)", data,
- str & I8042_STR_AUXDATA ? "aux" : "kbd");
+ dbg("%02x <- i8042 (flush, %s)\n",
+ data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
}
spin_unlock_irqrestore(&i8042_lock, flags);
@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
if (error)
return error;
- dbg("%02x -> i8042 (command)", command & 0xff);
+ dbg("%02x -> i8042 (command)\n", command & 0xff);
i8042_write_command(command & 0xff);
for (i = 0; i < ((command >> 12) & 0xf); i++) {
error = i8042_wait_write();
if (error)
return error;
- dbg("%02x -> i8042 (parameter)", param[i]);
+ dbg("%02x -> i8042 (parameter)\n", param[i]);
i8042_write_data(param[i]);
}
for (i = 0; i < ((command >> 8) & 0xf); i++) {
error = i8042_wait_read();
if (error) {
- dbg(" -- i8042 (timeout)");
+ dbg(" -- i8042 (timeout)\n");
return error;
}
if (command == I8042_CMD_AUX_LOOP &&
!(i8042_read_status() & I8042_STR_AUXDATA)) {
- dbg(" -- i8042 (auxerr)");
+ dbg(" -- i8042 (auxerr)\n");
return -1;
}
param[i] = i8042_read_data();
- dbg("%02x <- i8042 (return)", param[i]);
+ dbg("%02x <- i8042 (return)\n", param[i]);
}
return 0;
@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
spin_lock_irqsave(&i8042_lock, flags);
if (!(retval = i8042_wait_write())) {
- dbg("%02x -> i8042 (kbd-data)", c);
+ dbg("%02x -> i8042 (kbd-data)\n", c);
i8042_write_data(c);
}
@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
i8042_ctr &= ~irq_bit;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
- printk(KERN_WARNING
- "i8042.c: Can't write CTR while closing %s port.\n",
- port_name);
+ pr_warn("Can't write CTR while closing %s port\n", port_name);
udelay(50);
i8042_ctr &= ~disable_bit;
i8042_ctr |= irq_bit;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
- printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
- port_name);
+ pr_err("Can't reactivate %s port\n", port_name);
/*
* See if there is any data appeared while we were messing with
@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
str = i8042_read_status();
if (unlikely(~str & I8042_STR_OBF)) {
spin_unlock_irqrestore(&i8042_lock, flags);
- if (irq) dbg("Interrupt %d, without any data", irq);
+ if (irq)
+ dbg("Interrupt %d, without any data\n", irq);
ret = 0;
goto out;
}
@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
dfl = 0;
if (str & I8042_STR_MUXERR) {
- dbg("MUX error, status is %02x, data is %02x", str, data);
+ dbg("MUX error, status is %02x, data is %02x\n",
+ str, data);
/*
* When MUXERR condition is signalled the data register can only contain
* 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
port = &i8042_ports[port_no];
serio = port->exists ? port->serio : NULL;
- dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+ dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
data, port_no, irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
i8042_ctr &= ~I8042_CTR_KBDINT;
i8042_ctr |= I8042_CTR_KBDDIS;
- printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+ pr_err("Failed to enable KBD port\n");
return -EIO;
}
@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
i8042_ctr &= ~I8042_CTR_AUXINT;
i8042_ctr |= I8042_CTR_AUXDIS;
- printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+ pr_err("Failed to enable AUX port\n");
return -EIO;
}
@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
if (i8042_set_mux_mode(true, &mux_version))
return -1;
- printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+ pr_info("Detected active multiplexing controller, rev %d.%d\n",
(mux_version >> 4) & 0xf, mux_version & 0xf);
/*
@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
i8042_ctr &= ~I8042_CTR_AUXINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+ pr_err("Failed to disable AUX port, can't use MUX\n");
return -EIO;
}
@@ -676,8 +677,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
str = i8042_read_status();
if (str & I8042_STR_OBF) {
data = i8042_read_data();
- dbg("%02x <- i8042 (aux_test_irq, %s)",
- data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+ dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+ data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
if (i8042_irq_being_tested &&
data == 0xa5 && (str & I8042_STR_AUXDATA))
complete(&i8042_aux_irq_delivered);
@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
*/
if (i8042_toggle_aux(false)) {
- printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
- printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+ pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+ pr_warn("If AUX port is really absent please use the 'i8042.noaux' option.\n");
}
if (i8042_toggle_aux(true))
@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
* AUX IRQ was never delivered so we need to flush the controller to
* get rid of the byte we put there; otherwise keyboard may not work.
*/
- dbg(" -- i8042 (aux irq test timeout)");
+ dbg(" -- i8042 (aux irq test timeout)\n");
i8042_flush();
retval = -1;
}
@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
static int i8042_controller_check(void)
{
if (i8042_flush() == I8042_BUFFER_SIZE) {
- printk(KERN_ERR "i8042.c: No controller found.\n");
+ pr_err("No controller found\n");
return -ENODEV;
}
@@ -864,15 +865,15 @@ static int i8042_controller_selftest(void)
do {
if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
- printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+ pr_err("i8042 controller self test timeout\n");
return -ENODEV;
}
if (param == I8042_RET_CTL_TEST)
return 0;
- printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
- param, I8042_RET_CTL_TEST);
+ pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
+ param, I8042_RET_CTL_TEST);
msleep(50);
} while (i++ < 5);
@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
* and user will still get a working keyboard. This is especially
* important on netbooks. On other arches we trust hardware more.
*/
- printk(KERN_INFO
- "i8042: giving up on controller selftest, continuing anyway...\n");
+ pr_info("giving up on controller selftest, continuing anyway...\n");
return 0;
#else
return -EIO;
@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
do {
if (n >= 10) {
- printk(KERN_ERR
- "i8042.c: Unable to get stable CTR read.\n");
+ pr_err("Unable to get stable CTR read\n");
return -EIO;
}
@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
udelay(50);
if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
- printk(KERN_ERR
- "i8042.c: Can't read CTR while initializing i8042.\n");
+ pr_err("Can't read CTR while initializing i8042\n");
return -EIO;
}
@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
if (i8042_unlock)
i8042_ctr |= I8042_CTR_IGNKEYLOCK;
else
- printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+ pr_warn("Warning: Keylock active\n");
}
spin_unlock_irqrestore(&i8042_lock, flags);
@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
*/
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+ pr_err("Can't write CTR while initializing i8042\n");
return -EIO;
}
@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
- printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+ pr_warn("Can't write CTR while resetting\n");
/*
* Disable MUX mode if present.
@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
*/
if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
- printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+ pr_warn("Can't restore CTR\n");
}
@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
led = (state) ? 0x01 | 0x04 : 0;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
- dbg("%02x -> i8042 (panic blink)", 0xed);
+ dbg("%02x -> i8042 (panic blink)\n", 0xed);
i8042_suppress_kbd_ack = 2;
i8042_write_data(0xed); /* set leds */
DELAY;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
DELAY;
- dbg("%02x -> i8042 (panic blink)", led);
+ dbg("%02x -> i8042 (panic blink)\n", led);
i8042_write_data(led);
DELAY;
return delay;
@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
error = i8042_command(¶m, 0x1059);
if (error)
- printk(KERN_WARNING
- "Failed to enable DRITEK extension: %d\n",
- error);
+ pr_warn("Failed to enable DRITEK extension: %d\n", error);
}
#endif
@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+ pr_warn("Can't write CTR to resume, retrying...\n");
msleep(50);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042: CTR write retry failed\n");
+ pr_err("CTR write retry failed\n");
return -EIO;
}
}
@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
if (i8042_mux_present) {
if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
- printk(KERN_WARNING
- "i8042: failed to resume active multiplexor, "
- "mouse won't work.\n");
+ pr_warn("failed to resume active multiplexor, mouse won't work\n");
} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
i8042_enable_aux_port();
@@ -1268,7 +1262,7 @@ static void __init i8042_register_ports(void)
for (i = 0; i < I8042_NUM_PORTS; i++) {
if (i8042_ports[i].serio) {
- printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+ pr_info("%s at %#lx,%#lx irq %d\n",
i8042_ports[i].serio->name,
(unsigned long) I8042_DATA_REG,
(unsigned long) I8042_COMMAND_REG,
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index cbc1beb..f510950 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -89,15 +89,20 @@
#ifdef DEBUG
static unsigned long i8042_start_time;
#define dbg_init() do { i8042_start_time = jiffies; } while (0)
-#define dbg(format, arg...) \
- do { \
- if (i8042_debug) \
- printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" , \
- ## arg, (int) (jiffies - i8042_start_time)); \
- } while (0)
+#define dbg(format, arg...) \
+do { \
+ if (i8042_debug) \
+ printk(KERN_DEBUG pr_fmt(format "[%d]"), \
+ ##arg, (int)(jiffies - i8042_start_time)); \
+} while (0)
+
#else
#define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG pr_fmt(format), ##arg); \
+} while (0)
#endif
#endif /* _I8042_H */
--
1.7.3.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
