Texas Instruments' TNETV107X is an ARM1176 based SoC, with on-chip touchscreen and keypad controllers. This patch series adds drivers for these controllers. Changes between v1 and v2: 1. Cleaned up platform data needs by reusing matrix keypad pdata 2. Eliminated calibration code from touch driver 3. Relocated h/w init code to open and close 4. Other minor cleanups Cyril Chemparathy (5): input: add driver for tnetv107x on-chip keypad controller davinci: add tnetv107x keypad platform device davinci: add keypad config for tnetv107x evm board input: add driver for tnetv107x touchscreen controller davinci: add tnetv107x touchscreen platform device arch/arm/mach-davinci/board-tnetv107x-evm.c | 56 ++++ arch/arm/mach-davinci/devices-tnetv107x.c | 50 +++ arch/arm/mach-davinci/include/mach/tnetv107x.h | 3 + drivers/input/keyboard/Kconfig | 9 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/tnetv107x-keypad.c | 329 +++++++++++++++++++ drivers/input/touchscreen/Kconfig | 9 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/tnetv107x-ts.c | 401 ++++++++++++++++++++++++ 9 files changed, 859 insertions(+), 0 deletions(-) create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c create mode 100644 drivers/input/touchscreen/tnetv107x-ts.c -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
