From: Chris Bagwell <chris@xxxxxxxxxxxxxx>
This adds support for Pen on Bamboo Pen and Bamboo Pen&Touch
devices. Touchpad is handled by previous Bamboo Touch
logic.
Signed-off-by: Chris Bagwell <chris@xxxxxxxxxxxxxx>
---
drivers/input/tablet/wacom_wac.c | 77 ++++++++++++++++++++++++++++++++++++++
1 files changed, 77 insertions(+), 0 deletions(-)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 2f7ed9a..3943ddf 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -904,10 +904,73 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
return 0;
}
+static int wacom_bpt_pen(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ unsigned char *data = wacom->data;
+ int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
+
+ /* Similar to Graphire protocol, data[1] & 0x20 is proximity and
+ * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore
+ * 2 unused tool ID's.
+ */
+ prox = (data[1] & 0x30) == 0x30;
+
+ /* All reports shared between PEN and RUBBER tool must be
+ * forced to a known starting value (zero) when transitioning to
+ * out-of-prox.
+ *
+ * If not reset then, to userspace, it will look like lost events
+ * if new tool comes in-prox with same values as previous tool sent.
+ *
+ * Hardware does report zero in most out-of-prox cases but not all.
+ */
+ if (prox) {
+ if (!wacom->shared->stylus_in_proximity) {
+ if (data[1] & 0x08) {
+ wacom->tool[0] = BTN_TOOL_RUBBER;
+ wacom->id[0] = ERASER_DEVICE_ID;
+ } else {
+ wacom->tool[0] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom->shared->stylus_in_proximity = true;
+ }
+ x = le16_to_cpup((__le16 *)&data[2]);
+ y = le16_to_cpup((__le16 *)&data[4]);
+ p = le16_to_cpup((__le16 *)&data[6]);
+ d = data[8];
+ pen = data[1] & 0x01;
+ btn1 = data[1] & 0x02;
+ btn2 = data[1] & 0x04;
+ }
+
+ input_report_key(input, BTN_TOUCH, pen);
+ input_report_key(input, BTN_STYLUS, btn1);
+ input_report_key(input, BTN_STYLUS2, btn2);
+
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_abs(input, ABS_PRESSURE, p);
+ input_report_abs(input, ABS_DISTANCE, d);
+
+ if (!prox) {
+ wacom->id[0] = 0;
+ wacom->shared->stylus_in_proximity = false;
+ }
+
+ input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */
+ input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */
+
+ return 1;
+}
+
static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
{
if (len == WACOM_PKGLEN_BBTOUCH)
return wacom_bpt_touch(wacom);
+ else if (len == WACOM_PKGLEN_BBFUN)
+ return wacom_bpt_pen(wacom);
return 0;
}
@@ -1193,6 +1256,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
features->pressure_fuzz, 0);
input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
MAX_TRACKING_ID, 0, 0);
+ } else if (features->device_type == BTN_TOOL_PEN) {
+ __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+ __set_bit(BTN_TOOL_PEN, input_dev->keybit);
+ __set_bit(BTN_STYLUS, input_dev->keybit);
+ __set_bit(BTN_STYLUS2, input_dev->keybit);
}
break;
}
@@ -1334,6 +1402,12 @@ static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS };
static struct wacom_features wacom_features_0xD0 =
{ "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD1 =
+ { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD2 =
+ { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD3 =
+ { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
@@ -1399,6 +1473,9 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xC7) },
{ USB_DEVICE_WACOM(0xCE) },
{ USB_DEVICE_WACOM(0xD0) },
+ { USB_DEVICE_WACOM(0xD1) },
+ { USB_DEVICE_WACOM(0xD2) },
+ { USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
