On Mon, Aug 30, 2010 at 02:22:10PM -0400, Neil Leeder wrote: > On 8/27/2010 6:33 PM, Dmitry Torokhov wrote: > >No, this is crazy... This is a twin-brother of the touchpad driver and > >I really do not understand why chip claiming to have PS/2 interface > >(3 ports if I were to believe the diagram) would not allow us talk to > >the devices... > > I didn't provide a key bit of information, sorry. The keyboard is > not attached to the EC's PS/2 port. It is on a matrix of GPIOs. And still you are using only one GPIO in your driver? While WPCE775x does seem to have matrix keypad support I think that you are using one of the 3 PS/2 ports, like your touchpad does. > > I was trying to explain that even though the firmware on the EC uses > 0xF4 written over i2c to initialize it, it doesn't appear to support > other PS/2 commands directed to the keyboard on the GPIO matrix. > The device is initialized with 0xf4; the device is supposed to respond with 0xfa; I wonder what scancodes the device reports... It smells strongly of PS/2. Also, it is not controller that supports PS/2 commands but rather the device itself so I am still hopeful that we could make use of the standard drivers. Wan, you worked at Nuvoton, do you know if wpce775 fully supports PS/2 interface? -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
