cc'ing lm-sensors (where this should have gone, this has nothing to do with input).
> On 05/21/10 13:17, Datta, Shubhrajyoti wrote:
>>
>> Adds the driver support for the TMP105 temperature sensor device. The interface is I2C.The driver supports the read of the temperature values.
>>
>> Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
> This device looks at first glance to be pretty similar to the TMP101 as supported
> by the lm75 driver. Would it make more sense to merge this support into that
> driver?
>
> I've not read the data sheets that closely so may have missed something!
>
> Couple of nitpicks below.
>> ---
>> drivers/hwmon/Kconfig | 10 ++
>> drivers/hwmon/Makefile | 1 +
>> drivers/hwmon/tmp105.c | 326 ++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 337 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/hwmon/tmp105.c
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index 68cf877..a4a5352 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1076,6 +1076,16 @@ config SENSORS_MC13783_ADC
>> help
>> Support for the A/D converter on MC13783 PMIC.
>>
>> +config SENSORS_TMP105
>> + tristate "Texas Instruments TMP421 and compatible"
> TMP105 or TMP421?
>> + depends on I2C
>> + help
>> + If you say yes here you get support for Texas Instruments TMP105
>> + temperature sensor chips.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called tmp105.
>> +
>> if ACPI
>>
>> comment "ACPI drivers"
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index 4bc215c..2c4e7a5 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -99,6 +99,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
>> obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
>> obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
>> obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
>> +obj-$(CONFIG_SENSORS_TMP105) += tmp105.o
>>
>> ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
>> EXTRA_CFLAGS += -DDEBUG
>> diff --git a/drivers/hwmon/tmp105.c b/drivers/hwmon/tmp105.c
>> new file mode 100644
>> index 0000000..8765b11
>> --- /dev/null
>> +++ b/drivers/hwmon/tmp105.c
>> @@ -0,0 +1,326 @@
>> +/*
>> + * tmp105.c
>> + *
>> + * TMP105 temperature sensor driver
>> + *
>> + * Copyright (C) 2010 Texas Instruments
>> + *
>> + * Author: Shubhrajyoti Datta <a0393217@xxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> +*/
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/i2c.h>
>> +#include <linux/kernel.h>
>> +#include <linux/hwmon.h>
>> +#include <linux/hwmon-sysfs.h>
>> +#include <linux/err.h>
>> +#include <linux/slab.h>
>> +
>> +/* Registers */
>> +#define TMP105_TEMP_REG 0x00
>> +#define TMP105_CONF_REG 0x01
>> +#define TMP105_TLOW_REG 0x02
>> +#define TMP105_THIGH_REG 0x03
>> +
>> +/* Configuration register parameters */
>> +#define TMP105_CONF_SD 0x01
>> +#define TMP105_CONF_TM 0x02
>> +#define TMP105_CONF_POL 0x04
>> +#define TMP105_CONF_F0 0x08
>> +#define TMP105_CONF_F1 0x10
>> +#define TMP105_CONF_R0 0x20
>> +#define TMP105_CONF_R1 0x40
>> +#define TMP105_CONF_OS 0x80
>> +
>> +#define TMP105_I2C_ADDRESS 0x48
>> +
>> +#define MAX_TEMP 128
>> +#define MIN_TEMP -55
>> +
>> +/* Each client has this additional data */
>> +struct tmp105_data {
>> + struct i2c_client *client;
>> + /* mutex for sysfs operations */
>> + struct mutex lock;
>> + struct device *hwmon_dev;
>> + s16 temp[3];
>> + unsigned long last_updated;
>> + u8 configuration_setting;
>> +};
>> +
>> +static const u8 tmp105_reg[] = {
>> + TMP105_TEMP_REG,
>> + TMP105_TLOW_REG,
>> + TMP105_THIGH_REG,
>> +};
>> +
>> +static void tmp105_init_client(struct i2c_client *client);
>> +
>> +static signed long tmp105_reg_to_mC(s16 val)
>> +{
>> + signed long temp_mC;
>> + if (val & 0x800)
>> + val = val - 0x1000 ;
> Stray space.
>
>> + temp_mC = (val * 64000) / 1024;
>> + return temp_mC;
>> +}
>> +
>> +static u16 tmp105_C_to_reg(signed long val)
>> +{
>> + val = (val * 1024) / 64000;
>> + if (val < 0)
>> + val = val + 0x1000;
>> + return (u16)val;
>> +}
>> +
>> +static s16 *tmp105_update_device(struct i2c_client *client,
>> + int index)
>> +{
>> + struct tmp105_data *data = i2c_get_clientdata(client);
>> + u8 tmp[2];
>> +
>> + mutex_lock(&data->lock);
>> +
>> + if (time_after(jiffies, data->last_updated + HZ/4)) {
>> + i2c_smbus_read_i2c_block_data(client,
>> + tmp105_reg[index], 2, tmp);
>> + data->temp[index] = ((tmp[0] << 4) | ((tmp[1] & 0xF0) >> 4));
>> + printk(KERN_INFO "Raw temperature: %u\n", data->temp[index]);
>> + data->last_updated = jiffies;
>> + }
>> +
>> + mutex_unlock(&data->lock);
>> + return data->temp[index] ;
>> +}
>> +
>> +static ssize_t show_temp_value(struct device *dev,
>> + struct device_attribute *devattr, char *buf)
>> +{
>> + struct sensor_device_attribute *sda = to_sensor_dev_attr(devattr);
>> + struct i2c_client *client = to_i2c_client(dev);
>> + s16 temperature = tmp105_update_device(client , sda->index);
>> + signed long temp_in_mC;
>> +
>> + temp_in_mC = tmp105_reg_to_mC(temperature);
>> +
>> + return sprintf(buf, "%d\n", temp_in_mC);
>> +}
>> +
>> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL , 0);
>> +
>> +static ssize_t tmp105_set_temp(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
>> + struct i2c_client *client = to_i2c_client(dev);
>> + struct tmp105_data *tmp105 = i2c_get_clientdata(client);
>> + signed long val;
>> + int status = 0;
>> + u16 temp;
>> +
>> + if ((strict_strtol(buf, 10, &val) < 0))
>> + return -EINVAL;
>> +
>> + SENSORS_LIMIT(val , MIN_TEMP , MAX_TEMP);
>> +
>> + mutex_lock(&tmp105->lock);
>> +
>> + temp = tmp105_C_to_reg(val);
>> + temp = ((temp & 0xFF0) >> 4) | ((temp & 0xF)<<12);
> Random spacing
>
>> +
>> + status = i2c_smbus_write_word_data(client, tmp105_reg[sda->index],
>> + temp);
>> +
>> + tmp105->temp[sda->index] = temp;
>> + mutex_unlock(&tmp105->lock);
>> + return status ? : count;
>> +}
>> +
>> +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_value,
>> + tmp105_set_temp, 1);
>> +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_value,
>> + tmp105_set_temp, 2);
>> +
>> +/* sysfs call */
>> +static ssize_t set_configuration(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + s32 status;
>> + struct i2c_client *client = to_i2c_client(dev);
>> + struct tmp105_data *data = i2c_get_clientdata(client);
>> + data->configuration_setting = simple_strtoul(buf, NULL, 10);
>> + /* I2C write to the configuration register */
>> + status = i2c_smbus_write_byte_data(client, TMP105_CONF_REG,
>> + data->configuration_setting);
> What's status for given you don't take any notice of it?
>
>> + return count;
>> +}
>> +
>> +static ssize_t show_configuration(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct i2c_client *client = to_i2c_client(dev);
>> + struct tmp105_data *data = i2c_get_clientdata(client);
>> + u8 tmp;
>> + i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &tmp);
>> + data->configuration_setting = tmp;
>> + return sprintf(buf, "%u\n", data->configuration_setting);
>> +}
>> +static DEVICE_ATTR(configuration, S_IWUSR | S_IRUGO, show_configuration,
>> + set_configuration);
>> +
>> +
>> +static struct attribute *tmp105_attributes[] = {
>> + &dev_attr_configuration.attr,
>> + &sensor_dev_attr_temp1_input.dev_attr.attr,
>> + &sensor_dev_attr_temp1_min.dev_attr.attr,
>> + &sensor_dev_attr_temp1_max.dev_attr.attr,
>> + NULL
>> +};
>> +
>> +static const struct attribute_group tmp105_attr_group = {
>> + .attrs = tmp105_attributes,
>> +};
>> +
>> +static int tmp105_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct tmp105_data *tmp105_data;
>> + int err;
>> +
>> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
>> + dev_dbg(&client->dev, "adapter doesn't support I2C\n");
>> + return -ENODEV;
>> + }
>> +
>> + tmp105_data = kzalloc(sizeof(struct tmp105_data), GFP_KERNEL);
>> + if (!tmp105_data) {
>> + err = -ENOMEM;
>> + goto exit;
>> + }
>> + tmp105_data->client = client;
>> +
>> + i2c_set_clientdata(client, tmp105_data);
>> + mutex_init(&tmp105_data->lock);
>> +
>> + /* Initialize the TMP105 chip */
>> + tmp105_init_client(client);
>> +
>> + /* Register sysfs hooks */
>> + err = sysfs_create_group(&client->dev.kobj, &tmp105_attr_group);
>> + if (err)
>> + goto exit_free;
>> + tmp105_data->hwmon_dev = hwmon_device_register(&client->dev);
>> + if (IS_ERR(tmp105_data->hwmon_dev)) {
>> + err = PTR_ERR(tmp105_data->hwmon_dev);
>> + tmp105_data->hwmon_dev = NULL;
>> + goto exit_remove;
>> + }
>> + return 0;
>> +
>> +exit_remove:
>> + sysfs_remove_group(&client->dev.kobj, &tmp105_attr_group);
>> +exit_free:
>> + i2c_set_clientdata(client, NULL);
>> + kfree(tmp105_data);
>> +exit:
>> + return err;
>> +}
>> +
>> +static int tmp105_remove(struct i2c_client *client)
>> +{
>> + struct tmp105_data *tmp105 = i2c_get_clientdata(client);
>> + hwmon_device_unregister(tmp105->hwmon_dev);
>> +
>> + sysfs_remove_group(&client->dev.kobj, &tmp105_attr_group);
>> + i2c_set_clientdata(client, NULL);
>> + kfree(tmp105);
>> + return 0;
>> +}
>> +
>> +/* Called when we have found a new TMP105. */
>> +static void tmp105_init_client(struct i2c_client *client)
>> +{
>> + struct tmp105_data *data = i2c_get_clientdata(client);
>> + data->last_updated = jiffies - HZ;
>> + mutex_init(&data->lock);
>> +}
>> +
>> +static const struct i2c_device_id tmp105_id[] = {
>> + { "tmp105", 0 },
>> + { }
>> +};
>> +
>> +#ifdef CONFIG_PM
>> +static int tmp105_suspend(struct device *dev)
>> +{
>> + struct i2c_client *client = to_i2c_client(dev);
>> + u8 config_reg;
>> + i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &config_reg);
>> + config_reg = config_reg | TMP102_CONF_SD;
>> + i2c_smbus_write_byte_data(client, TMP105_CONF_REG, TMP102_CONF_SD);
>> + return 0;
>> +}
>> +
>> +static int tmp105_resume(struct device *dev)
>> +{
>> + struct i2c_client *client = to_i2c_client(dev);
>> + i2c_smbus_read_i2c_block_data(client, TMP105_CONF_REG, 1, &config_reg);
>> + config_reg = config_reg & ~TMP102_CONF_SD;
>> + i2c_smbus_write_byte_data(client, TMP105_CONF_REG, TMP102_CONF_SD);
>> +}
>> +
>> +static struct dev_pm_ops tmp105_dev_pm_ops = {
>> + .suspend = tmp105_suspend,
>> + .resume = tmp105_resume,
>> +};
>> +
>> +#define TMP105_DEV_PM_OPS (&tmp105_dev_pm_ops)
>> +#else
>> +#define TMP105_DEV_PM_OPS NULL
>> +#endif /* CONFIG_PM */
>> +
>> +
>> +static struct i2c_driver tmp105_driver = {
>> + .driver = {
>> + .name = "tmp105",
>> + .owner = THIS_MODULE,
>> + .pm = TMP105_DEV_PM_OPS,
>> + },
>> + .probe = tmp105_probe,
>> + .remove = tmp105_remove,
>> + .id_table = tmp105_id,
>> + .class = I2C_CLASS_HWMON,
>> +};
>> +
>> +static int __init tmp105_init(void)
>> +{
>> + return i2c_add_driver(&tmp105_driver);
>> +}
>> +
>> +static void __exit tmp105_exit(void)
>> +{
>> + i2c_del_driver(&tmp105_driver);
>> +}
>> +
>> +MODULE_DESCRIPTION("TMP105 driver");
>> +MODULE_LICENSE("GPL");
>> +
>> +module_init(tmp105_init);
>> +module_exit(tmp105_exit);
>> +
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
