From: Kalhan Trisal <kalhan.trisal@xxxxxxxxx>
The LS driver will read the latest Lux measurement based upon the
light brightness and will report the LUX output through sysfs interface.
Signed-off-by: Kalhan Trisal <kalhan.trisal@xxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
drivers/hwmon/Kconfig | 9 ++
drivers/hwmon/Makefile | 1
drivers/hwmon/isl29020.c | 243 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 253 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwmon/isl29020.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 74f672d..1fa2533 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1095,6 +1095,15 @@ config SENSORS_HMC6352
This driver provides support for the Honeywell HMC6352 compass,
providing configuration and heading data via sysfs.
+config SENSORS_ISL29020
+ tristate "Intersil ISL29020 ALS"
+ depends on I2C
+ help
+ If you say yes here you get support for the ALS Devices
+ Ambient Light Sensor monitoring chip.
+ Range values can be configured using sysfs.
+ Lux data is accessible via sysfs.
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index ad2ed36..13d6832 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_HMC6352) += hmc6352.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
+obj-$(CONFIG_SENSORS_ISL29020) += isl29020.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
diff --git a/drivers/hwmon/isl29020.c b/drivers/hwmon/isl29020.c
new file mode 100644
index 0000000..458140d
--- /dev/null
+++ b/drivers/hwmon/isl29020.c
@@ -0,0 +1,243 @@
+/*
+ * isl29020.c - Intersil ALS Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+
+#define ALS_MIN_RANGE_VAL 0
+#define ALS_MAX_RANGE_VAL 5
+
+struct als_data {
+ struct device *hwmon_dev;
+};
+
+static unsigned int i2c_write_current_data(struct i2c_client *client,
+ unsigned int reg, unsigned int value)
+{
+ int ret_val;
+
+ ret_val = i2c_smbus_write_byte_data(client, reg, value);
+ return ret_val;
+}
+
+static ssize_t als_sensing_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int val;
+
+ val = i2c_smbus_read_byte_data(client, 0x00);
+ return sprintf(buf, "%d000\n", 1 << (2 * (val & 3)));
+
+}
+
+static ssize_t als_lux_output_data_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned int ret_val, val;
+ unsigned long int lux, max_count;
+ int tempv1, tempv2;
+
+ max_count = 65535;
+ tempv1 = i2c_smbus_read_byte_data(client, 0x02); /* MSB data */
+ tempv2 = i2c_smbus_read_byte_data(client, 0x01); /* LSB data */
+ ret_val = tempv1;
+ ret_val = (ret_val << 8 | tempv2);
+ val = i2c_smbus_read_byte_data(client, 0x00);
+ lux = ((((1 << (2 * (val & 3))))*1000) * ret_val) / max_count;
+ return sprintf(buf, "%ld\n", lux);
+}
+
+static ssize_t als_sensing_range_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned int ret_val, set_val = 0;
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ ret_val = i2c_smbus_read_byte_data(client, 0x00);
+ ret_val = ret_val & 0xFC; /*reset the bit before setting them */
+ if (val == 1)
+ set_val = (ret_val | 0x00); /* setting the 1:0 bit */
+ else if (val == 2)
+ set_val = (ret_val | 0x01);
+ else if (val == 3)
+ set_val = (ret_val | 0x02);
+ else if (val == 4)
+ set_val = (ret_val | 0x03);
+ else
+ goto invarg;
+ i2c_write_current_data(client, 0x00, set_val);
+ return count;
+invarg:
+ return -EINVAL;
+}
+
+static ssize_t als_power_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret_val;
+
+ ret_val = i2c_smbus_read_byte_data(client, 0x00);
+ ret_val = ret_val & 0x80;
+ if (ret_val == 0x80)
+ ret_val = 1;
+ return sprintf(buf, "%x", ret_val);
+}
+
+static ssize_t als_power_status_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned long val = 0;
+ char curr_val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+
+ curr_val = i2c_smbus_read_byte_data(client, 0x00);
+ if (val == 1)
+ curr_val = curr_val | 0x80;
+ else if (val == 0)
+ curr_val = curr_val & 0x7F;
+ else
+ return -EINVAL;
+ i2c_write_current_data(client, 0x00, curr_val);
+ return count;
+}
+
+static DEVICE_ATTR(sensing_range, S_IRUGO | S_IWUSR,
+ als_sensing_range_show, als_sensing_range_store);
+static DEVICE_ATTR(lux_output, S_IRUGO, als_lux_output_data_show, NULL);
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+ als_power_status_show, als_power_status_store);
+
+static struct attribute *mid_att_als[] = {
+ &dev_attr_sensing_range.attr,
+ &dev_attr_lux_output.attr,
+ &dev_attr_power_state.attr,
+ NULL
+};
+
+static struct attribute_group m_als_gr = {
+ .name = "isl29020",
+ .attrs = mid_att_als
+};
+
+static void als_set_default_config(struct i2c_client *client)
+{
+ i2c_write_current_data(client, 0x00, 0xc0);
+}
+
+static int isl29020_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int res;
+ struct als_data *data;
+
+ data = kzalloc(sizeof(struct als_data), GFP_KERNEL);
+ if (data == NULL) {
+ printk(KERN_WARNING " isl29020: out of memory");
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, data);
+
+ res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
+ if (res) {
+ printk(KERN_WARNING "isl29020: device create file failed!!\n");
+ goto als_error1;
+ }
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ res = PTR_ERR(data->hwmon_dev);
+ data->hwmon_dev = NULL;
+ sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+ printk(KERN_ERR "isl29020:unable to register hwmon device\n");
+ goto als_error1;
+ }
+ dev_info(&client->dev, "%s isl29020: ALS chip found\n", client->name);
+ als_set_default_config(client);
+ return res;
+
+als_error1:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+ return res;
+}
+
+static int isl29020_remove(struct i2c_client *client)
+{
+ struct als_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+ kfree(data);
+ return 0;
+}
+
+static struct i2c_device_id isl29020_id[] = {
+ { "i2c_als", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, isl29020_id);
+
+static struct i2c_driver isl29020_driver = {
+ .driver = {
+ .name = "isl29020",
+ },
+ .probe = isl29020_probe,
+ .remove = isl29020_remove,
+ .id_table = isl29020_id,
+};
+
+static int __init sensor_isl29020_init(void)
+{
+ return i2c_add_driver(&isl29020_driver);
+}
+
+static void __exit sensor_isl29020_exit(void)
+{
+ i2c_del_driver(&isl29020_driver);
+}
+
+module_init(sensor_isl29020_init);
+module_exit(sensor_isl29020_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@xxxxxxxxx");
+MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
+MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
