Enable TSC2005 touchscreen driver on the RX-51 board.
Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
---
arch/arm/configs/rx51_defconfig | 1 +
arch/arm/mach-omap2/board-rx51-peripherals.c | 57 ++++++++++++++++++++++++++
2 files changed, 58 insertions(+), 0 deletions(-)
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index b6eeebb..95b76ec 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -801,6 +801,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_TOUCHSCREEN_TSC2005=m
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acafdbc..bdd7398 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -14,6 +14,7 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
+#include <linux/spi/tsc2005.h>
#include <linux/spi/wl12xx.h>
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
@@ -42,18 +43,28 @@
#define RX51_WL1251_POWER_GPIO 87
#define RX51_WL1251_IRQ_GPIO 42
+#define RX51_TSC2005_RESET_GPIO 104
+#define RX51_TSC2005_IRQ_GPIO 100
+
/* list all spi devices here */
enum {
RX51_SPI_WL1251,
+ RX51_SPI_TSC2005,
};
static struct wl12xx_platform_data wl1251_pdata;
+static struct tsc2005_platform_data tsc2005_pdata;
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
[RX51_SPI_WL1251] = {
.modalias = "wl1251",
@@ -64,6 +75,15 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.controller_data = &wl1251_mcspi_config,
.platform_data = &wl1251_pdata,
},
+ [RX51_SPI_TSC2005] = {
+ .modalias = "tsc2005",
+ .bus_num = 1,
+ .chip_select = 0,
+ .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
+ .max_speed_hz = 6000000,
+ .controller_data = &tsc2005_mcspi_config,
+ .platform_data = &tsc2005_pdata,
+ },
};
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -665,6 +685,42 @@ static inline void board_onenand_init(void)
#endif
+static struct tsc2005_platform_data tsc2005_pdata = {
+ .ts_pressure_max = 2048,
+ .ts_pressure_fudge = 2,
+ .ts_x_max = 4096,
+ .ts_x_fudge = 4,
+ .ts_y_max = 4096,
+ .ts_y_fudge = 7,
+ .ts_x_plate_ohm = 280,
+ .esd_timeout_ms = 8000,
+};
+
+static void rx51_tsc2005_set_reset(bool enable)
+{
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
+}
+
+static void __init rx51_init_tsc2005(void)
+{
+ int r;
+
+ r = gpio_request(RX51_TSC2005_IRQ_GPIO, "tsc2005 IRQ");
+ if (r >= 0)
+ gpio_direction_input(RX51_TSC2005_IRQ_GPIO);
+ else
+ printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ");
+
+ r = gpio_request(RX51_TSC2005_RESET_GPIO, "tsc2005 reset");
+ if (r >= 0) {
+ gpio_direction_output(RX51_TSC2005_RESET_GPIO, 1);
+ tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
+ } else {
+ printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
+ tsc2005_pdata.esd_timeout_ms = 0;
+ }
+}
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
static struct omap_smc91x_platform_data board_smc91x_data = {
@@ -749,6 +805,7 @@ void __init rx51_peripherals_init(void)
board_smc91x_init();
rx51_add_gpio_keys();
rx51_init_wl1251();
+ rx51_init_tsc2005();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
}
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
