Am 09.03.2010 20:01, schrieb Dmitry Torokhov:
> Hi Thomas,
>
> On Tue, Mar 09, 2010 at 07:56:07PM +0100, Thomas Bächler wrote:
>>
>> Signed-off-by: Thomas Bächler <thomas@xxxxxxxxxxxxx>
>> ---
>> This patch was made by trial-and-error, I copied the byte0 and
>> mask0 value from another model, tried different flags settings
>> and it seems to work. I have no idea if there might be side-
>> effects due to incorrect settings. Please tell me if I can do
>> anything to verify or correct these values.
>>
>> drivers/input/mouse/alps.c | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
>> index f93c2c0..f6dad83 100644
>> --- a/drivers/input/mouse/alps.c
>> +++ b/drivers/input/mouse/alps.c
>> @@ -63,6 +63,8 @@ static const struct alps_model_info alps_model_data[] = {
>> { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
>> ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
>> { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
>> + { { 0x52, 0x01, 0x14 }, 0xff, 0xff,
>> + ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
>> };
>>
>
> Looking at the picture it appears to have a touchpad only, not a
> touchpad/trackpoint combo. So I am wondering if ALPS_DUALPOINT and
> ALPS_PS2_INTERLEAVED flags are needed here. What happens if you remove
> them? Also, does it have external PS/2 post?
The model I have here does have a trackpoint, thus I put ALPS_DUALPOINT
in. Also, I had problems without ALPS_PS2_INTERLEAVED ([...] lost sync
at byte 1). I did not try without ALPS_PASS though, only with.
The device does not seem to have an external PS/2 port, but there is a
connector for a docking station (which I don't own).
I am more concerned about the two 0xff values here, because they are
actually guesses.
Thanks for the quick response.
Attachment:
signature.asc
Description: OpenPGP digital signature
