This patch adds support for VirtualBox touchscreen emulation to the Lifebook
input driver.
The device will be present as an extension to the PS/2 mouse emulation in the
next major release of VirtualBox. We chose to emulate the Lifebook touchscreen
mainly in order to simplify in-kernel support, as the Lifebook driver is active
by default in most kernel configurations. We had to extend the protocol
slightly as we wish to provide five mouse buttons and a two-way scroll wheel to
virtual guest systems, and we tried to do this in the most non-intrusive way
possible with regard to the current driver, which is the reason for the slightly
unusual handling of mouse buttons three to five.
Most changes in the driver are conditional on the VirtualBox DMI string being
found. A notable exception is the removal of the keybit fields for the left,
right and middle buttons for the first device. The current X.Org evdev driver
was seeing these and treating the device as a touchpad instead of a touchscreen.
I also tested this with a vanilla Ubuntu Lucid live CD while emulating the
original device and presenting a suitable DMI string.
Signed-off-by: Michael Thayer <michael.thayer@xxxxxxx>
--- lifebook.c 2010-02-23 12:01:32.941643681 +0100
+++ lifebook-vbox.c 2010-02-23 11:44:57.831664482 +0100
@@ -1,6 +1,8 @@
/*
* Fujitsu B-series Lifebook PS/2 TouchScreen driver
+ * Also used for Oracle VirtualBox mouse integration
*
+ * Copyright (c) 2010 Oracle. All rights reserved.
* Copyright (c) 2005 Vojtech Pavlik <vojtech@xxxxxxx>
* Copyright (c) 2005 Kenan Esau <kenan.esau@xxxxxxxx>
*
@@ -41,6 +43,15 @@ static int lifebook_set_6byte_proto(cons
return 0;
}
+static bool lifebook_use_vbox_proto;
+
+static int lifebook_set_vbox_proto(const struct dmi_system_id *d)
+{
+ lifebook_use_6byte_proto = true;
+ lifebook_use_vbox_proto = true;
+ return 0;
+}
+
static const struct dmi_system_id lifebook_dmi_table[] = {
{
.ident = "FLORA-ie 55mi",
@@ -115,6 +126,13 @@ static const struct dmi_system_id lifebo
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
},
},
+ {
+ .ident = "VirtualBox",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "VirtualBox"),
+ },
+ .callback = lifebook_set_vbox_proto,
+ },
{ }
};
@@ -180,6 +198,21 @@ static psmouse_ret_t lifebook_process_by
((packet[0] & 0x10) ? packet[1] - 256 : packet[1]));
input_report_rel(dev2, REL_Y,
-(int)((packet[0] & 0x20) ? packet[2] - 256 : packet[2]));
+ if (lifebook_use_vbox_proto && !(packet[0] & 0x04)) {
+ unsigned btn = (packet[0] >> 6);
+
+ input_report_key(dev2, BTN_MIDDLE, btn == 1);
+ input_report_key(dev2, BTN_SIDE, btn == 2);
+ input_report_key(dev2, BTN_EXTRA, btn == 3);
+ }
+ if (lifebook_use_vbox_proto && (packet[0] & 0x04)) {
+ unsigned wheel = (packet[0] >> 6);
+
+ input_report_rel(dev2, REL_WHEEL,
+ (wheel == 0) - (wheel == 1));
+ input_report_rel(dev2, REL_HWHEEL,
+ (wheel == 2) - (wheel == 3));
+ }
}
input_report_key(dev2, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev2, BTN_RIGHT, packet[0] & 0x02);
@@ -200,11 +233,17 @@ static int lifebook_absolute_mode(struct
/*
Enable absolute output -- ps2_command fails always but if
you leave this call out the touchsreen will never send
- absolute coordinates
+ absolute coordinates.
+
+ Note that old versions of VirtualBox which didn't emulate the
+ touchscreen also failed to return an error here, so if we are
+ running inside VirtualBox, we actually have to make sure that
+ the command fails!
*/
param = lifebook_use_6byte_proto ? 0x08 : 0x07;
- ps2_command(ps2dev, ¶m, PSMOUSE_CMD_SETRES);
-
+ if (!ps2_command(ps2dev, ¶m, PSMOUSE_CMD_SETRES) &&
+ lifebook_use_vbox_proto)
+ return -1;
return 0;
}
@@ -251,11 +290,14 @@ int lifebook_detect(struct psmouse *psmo
return -1;
if (set_properties) {
- psmouse->vendor = "Fujitsu";
- psmouse->name = "Lifebook TouchScreen";
+ psmouse->vendor = !lifebook_use_vbox_proto ? "Fujitsu" :
+ "VirtualBox";
+ psmouse->name = !lifebook_use_vbox_proto ?
+ "Lifebook TouchScreen" :
+ "Mouse Integration" ;
}
- return 0;
+ return 0;
}
static int lifebook_create_relative_device(struct psmouse *psmouse)
@@ -274,7 +316,8 @@ static int lifebook_create_relative_devi
"%s/input1", psmouse->ps2dev.serio->phys);
dev2->phys = priv->phys;
- dev2->name = "PS/2 Touchpad";
+ dev2->name = !lifebook_use_vbox_proto ? "PS/2 Touchpad" :
+ "Virtual PS/2 Mouse";
dev2->id.bustype = BUS_I8042;
dev2->id.vendor = 0x0002;
dev2->id.product = PSMOUSE_LIFEBOOK;
@@ -285,6 +328,13 @@ static int lifebook_create_relative_devi
dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
dev2->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT);
+ if (lifebook_use_vbox_proto) {
+ __set_bit(BTN_MIDDLE, dev2->keybit);
+ __set_bit(REL_WHEEL, dev2->relbit);
+ __set_bit(REL_HWHEEL, dev2->relbit);
+ __set_bit(BTN_SIDE, dev2->keybit);
+ __set_bit(BTN_EXTRA, dev2->keybit);
+ }
error = input_register_device(priv->dev2);
if (error)
@@ -310,6 +360,14 @@ int lifebook_init(struct psmouse *psmous
dev1->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
dev1->relbit[0] = 0;
dev1->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ /*
+ The psmouse-base driver enables these bits, but if the X.Org
+ evdev driver sees them it thinks we are a touchpad, not a
+ touchscreen.
+ */
+ psmouse->dev->keybit[BIT_WORD(BTN_MOUSE)] &= ~(BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT));
+
input_set_abs_params(dev1, ABS_X, 0, max_coord, 0, 0);
input_set_abs_params(dev1, ABS_Y, 0, max_coord, 0, 0);
--
Sun Microsystems GmbH Michael Thayer
Werkstrasse 24 VirtualBox engineer
71384 Weinstadt, Germany mailto:michael.thayer@xxxxxxx
Sitz der Gesellschaft:
Sun Microsystems GmbH, Sonnenallee 1, 85551 Kirchheim-Heimstetten
Amtsgericht Muenchen: HRB 161028
Geschaeftsfuehrer: Thomas Schroeder, Wolfgang Engels, Wolf Frenkel
Vorsitzender des Aufsichtsrates: Martin Haering
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
